When it’s time for an oil change, the Toyota 4Runner will notify you with a ‘Maintenance Required’ warning on the instrument panel. Once the car has driven 4,500 miles since the last reset, this alert will appear.
Following service, follow these instructions to reset the maintenance light.
- The car’s ignition should be turned to “On.” Press the Engine Start button twice on push-button vehicles. Never start the car.
- To switch the display to show the mileage for Trip A, press the “Odometer/Trip stem button” on the instrument panel.
- “Off” the ignition, please.
- the “Odometer/Trip stem button” firmly depress and hold.
- Hold the “Odometer/Trip button down while turning the key in the ignition. Press the Engine Start button twice on push-button vehicles without holding the brake. Never start the car.
- The maintenance light has been reset once the odometer reads zero mileage.
This guide is applicable to all 20102021 Toyota 4Runner model years.
In This Article...
How can I turn the 4Runner’s maintenance light back on?
After the last reset, the maintenance light is set to turn on around 7500 miles later. At roughly 5000 miles after the last reset, it will actually begin to remain on longer.
If you perform your own oil changes or if the dealer forgets to reset it, follow these easy procedures.
These recommendations are found in TSB EL002-03:
1. Switch the ignition to the “ON” position. 2. Change the trip/odometer display to “ODO” mode. 3. Switch the ignition to the “OFF” position. 4. Turn the ignition switch to the “ON” position while pressing and holding the Trip Meter “RESET” button. 5. The warning light for servicing and maintenance will:
i. Light up continuously for three seconds ii. Blink for two seconds iii. Light up continuously for one second iv. Cut off
6. Unpress the “RESET” button on the trip meter. 7. Position the ignition switch to “OFF” 8. After switching the ignition to the “ON” position, make sure the service maintenance reminder light has stopped blinking.
How frequently should I have my Toyota 4runner’s oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota advises changing your Toyota 4Runner’s oil and filter every 3,000 to 5,000 miles. One of the most important and necessary procedures for your car is an oil change.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How do you turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How often should the oil be changed in a 2021 Toyota 4Runner?
For conventional oil, Toyota advises changing your 2021 Toyota 4Runner’s oil and filter every 3,0005,000 miles. Replacement of synthetic oil is advised every 7,500 to 10,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult the owner’s manual and your dealer.
How often should a Toyota 4Runner’s oil be changed in 2021?
It is recommended to change synthetic oil every 7,500 to 10,000 miles. For traditional oil, Toyota recommends having your 2021 Toyota 4Runner’s oil and filter replaced every 3,000 to 5,000 miles. Remember that the best way to determine the appropriate intervals for your vehicle is to consult your owner’s handbook and your dealer.
Toyota advises using synthetic motor oil.
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
How can the oil life be checked on a 2021 Toyota Tacoma?
Oil Level Check 20162021 Toyota Tacoma SR Extended Cab Pickup 2.7L 4 Cyl.
- Remove Dipstick – Find the oil dipstick, take it out, and clean it.
- Reinstall the dipstick, take it out, and then check the oil level.
- More Information – More details regarding the oil level.
Why does my maintenance light come on after I change the oil?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!