You may reset the maintenance light on the new Prius using the instructions in this chapter. We’ll use the center and directional pad buttons for entering, and we’ll also be looking at a heads-up display. The only thing left to accomplish is:
- Next, proceed to scroll left or right to locate the gear
- When the message appears, simply click again to address it and return to the main screen.
- Then, on the MAINTENANCE SYSTEM, press enter once more.
- It will now prompt you to reset; simply click YES to proceed.
- Hit enter after selecting the OIL MAINTENANCE from there.
- Hit enter after finding VEHICLE SETTINGS by scrolling down till you do.
- Prior to starting your vehicle, turn it on.
- Okay, start the engine and perform one final check to ensure the oil light has been turned off.
In This Article...
For Prius V (2016-2017)
- Make sure the ignition switch is turned on.
- You then click the middle button to access the menu.
- It will now ask you if you wish to initialize the system; select YES to finish.
- After that, tap the settings button to the left to access the sprocket.
- Press enter after that, then scroll down to MAINTENANCE SYSTEM.
That concludes it, and you are done. I don’t have to deal with it flashing at the beginning of the engine every time I start the car, and I’m good to go until the next oil change from Toyota service. I hope this article was helpful to you. Any inquiries can be left in the comments section below. Have a great day and thanks for reading.
On a 2010 Prius, how do you reset the oil maintenance light?
If you often perform maintenance on your 2010 Toyota Prius, the tiny maintenance required light might become very aggravating. It will only take a few minutes to correct, though, and is extremely simple. Follow these steps to reset the oil maintenance light on a 2010 Toyota Prius:
- Resetting oil maintenance data should be visible on the display.
- While pushing the push-button start twice, press and hold the mph button that is immediately above it.
- Press the push-button start once to turn the car off.
- As you double-tap the start button, keep your foot off the brake.
- The primary display should turn on in the center of the dashboard.
- To get to Trip A, push the Trip button on the steering wheel.
It’s best to get regular oil changes to keep your Prius in good condition. You may also reset the maintenance light in a matter of minutes. But did you know that by downloading the Jerry app and comparing prices, you can also save hundreds on auto insurance in only a few minutes?
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic cost for your Toyota Prius. Customers often save close to $900 annually!
How often should the oil be changed in a 2012 Prius?
Normally, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, Toyota advises changing your 2012 Toyota Prius’s oil and filter every 3,0005,000 miles.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Why does my maintenance light come on after I change the oil?
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!