When it’s time for an oil change, the Toyota 4Runner will notify you with a ‘Maintenance Required’ warning on the instrument panel. Once the car has driven 4,500 miles since the last reset, this alert will appear.
Following service, follow these instructions to reset the maintenance light.
- The car’s ignition should be turned to “On.” Press the Engine Start button twice on push-button vehicles. Never start the car.
- To switch the display to show the mileage for Trip A, press the “Odometer/Trip stem button” on the instrument panel.
- “Off” the ignition, please.
- the “Odometer/Trip stem button” firmly depress and hold.
- Hold the “Odometer/Trip button down while turning the key in the ignition. Press the Engine Start button twice on push-button vehicles without holding the brake. Never start the car.
- The maintenance light has been reset once the odometer reads zero mileage.
This guide is applicable to all 20102021 Toyota 4Runner model years.
In This Article...
How can the maintenance light on a Toyota 4Runner be turned off?
Usually, even after servicing, a vehicle’s maintenance light needs to be manually reset. So don’t be alarmed; this is very natural.
Follow these fast and simple procedures to reset the maintenance light on your 2016 Toyota 4Runner:
- Alternately, turn the ignition to auxiliary mode or ON. Never start the car.
- To see ODO, press the trip display.
- Switch the ignition to “OFF.”
- While turning your car back on, keep holding down the trip reset button.
Now that the maintenance indicator should be off, you can drive a little more comfortably knowing that your vehicle is up to date.
With Jerry, there is still another method to drive safely. The Jerry app instantly compiles rates from more than 50 leading insurance providers, including Nationwide and Allstate! Once you’ve decided, they even assist you in canceling your old coverage.
How frequently should I have my Toyota 4Runner’s oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota advises changing your Toyota 4Runner’s oil and filter every 3,000 to 5,000 miles. One of the most important and necessary procedures for your car is an oil change.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
How can the odometer on a Toyota 4runner be reset?
What about Toyota 4Runner versions that have a button to start the engine rather than an ignition key? To reset the maintenance light on a Toyota 4Runner with an engine start button, adhere to these steps:
- Push the “Engine Start” button twice to start the ignition. Never start the car. If the engine started, turn off the ignition and repeat the process.
- To navigate to “Trip A on the instrument panel, press the odometer button.
- Switch off the ignition.
- Turn on your Toyota 4Runner by pressing and holding the odometer button while simultaneously pressing and releasing the “Engine Start” button twice while releasing the brake.
- Hold the odometer button down until all zeroes appear on the display.
- It will state whether the reset was successful. Up until you get this confirmation, keep depressing the odometer button.
Once the reset is done, let go of the odometer button. Your Toyota 4Runner’s ignition should be turned off. The next time you operate your Toyota 4Runner, the maintenance light ought should be gone.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How often should the oil be changed in a 2021 Toyota 4Runner?
For conventional oil, Toyota advises changing your 2021 Toyota 4Runner’s oil and filter every 3,0005,000 miles. Replacement of synthetic oil is advised every 7,500 to 10,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult the owner’s manual and your dealer.
How often should a Toyota 4Runner’s oil be changed in 2021?
It is recommended to change synthetic oil every 7,500 to 10,000 miles. For traditional oil, Toyota recommends having your 2021 Toyota 4Runner’s oil and filter replaced every 3,000 to 5,000 miles. Remember that the best way to determine the appropriate intervals for your vehicle is to consult your owner’s handbook and your dealer.
Can you use synthetic oil to travel 10,000 miles?
a significant rise in engine repairs as a result of “extended oil changes that cause quick failures.
Typically, increasing your expense will only result in lower benefits. Similarly, waiting
We aim for every 5,000 miles and our personal automobiles hold between 6 and 9 quarts of full synthetic oil. When we finally get there, that equates to almost 6,000 kilometres… Yes, we also forget from time to time.