You must turn on the ignition without starting the motor in a 2018 Toyota Highlander to reset the change oil light. You can do this if your vehicle has a push-to-start feature by pressing the start button once while taking your foot off the brake pedal. Then you must push the Odometer button again and again until Trip A appears on the dash. Turn off the ignition when you notice Trip A. Then, while restarting the ignition, you must push and hold the odometer button. Hold the Odometer button down until the display reads 000000 Miles, then release it. You can stop when you notice this by turning off the ignition.
Press the push to start button twice on a 2018 Toyota Highlander without depressing the brake pedal to reset the replace oil light. It will switch to accessory mode. Press the odometer button when in accessory mode to bring up trip a. Turn the automobile off in trip A. To return to accessory mode, press the push-to-start button twice while holding down the brake pedal while holding down the odometer button. The change oil light has been reset once the screen has cleared.
In This Article...
What does a 2018 Toyota Highlander maintenance required mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop.
How often should an oil change be performed on a 2018 Toyota Highlander?
How often should an oil change be performed on a 2018 Toyota Highlander? Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2018 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
On a 2018 Toyota Sienna, how do you turn off the maintenance is needed light?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- The oil light should be off when you start your automobile.
- To confirm your selection, click YES when prompted.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
- By clicking OK, select MAINTENANCE RESET.
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
How can you stop the Toyota Highlander’s necessary oil changes?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can you turn a Toyota’s oil light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How long is the Toyota Highlander’s oil change interval?
One of the most essential and fundamental maintenance for your car is an oil change. For traditional oil, Toyota suggests changing your Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How much oil does a 2018 Highlander require?
The 2.7L 4-cylinder engine consumes 4.6 quarts of oil, while the 3.5L V6 engine requires 5.8 quarts. Both engine options are available for the 2018 Toyota Highlander.
Keep in mind that synthetic oil is recommended for both of these engines whenever you need to replace the oil!
It can be enjoyable to shop for a new automobile, but it’s not necessarily the best to do the same for your auto insurance. Thank goodness, the Jerry app has made it simpler than ever to compare prices on vehicle insurance.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy. Jerry will even assist you in combining your auto and house insurance for the greatest savings!
What does the triangle in a Toyota Highlander with the exclamation point mean?
Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.
While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.
An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.
Some of the typical warning lights that you might see are listed below:
- An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
- The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
- Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.
- TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
- Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
- An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:
- Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
- When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.
- Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
What does the Toyota Highlander’s maintenance required light mean?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.