The purpose of the maintenance light is to remind You to change the filter and feed your 2015 Toyota RAV4 with fresh synthetic SAE 0W-20 motor oil. So get into the driver’s seat, turn the key to the “start” position, and push the starter button to start the car. Once TRIP A appears on the LCD display of the odometer, press the DISP button. Shut off the vehicle. You need to use your other hand to turn the ignition back on, but only to the accessory position, so hold down the DISP button with your non-dominant hand right now! Don’t even attempt to start the car! You should now see the LCD flicker with a sequence of dashes that get smaller until it displays all zeros while you keep holding down the DISP button. You can now let go of the DISP button. Alternatively, you can now turn off the automobile and start it. You should see that the Maintenance Request light is currently off and will remain so for the next 5000 miles before turning back on.
On a 2015 Toyota Rav4, turn the ignition on first, then set the odometer to “odo” to reset the maintenance light. Switch the ignition off. While turning the ignition back on, push and hold the trip reset button.
Turn to trip A to clear the maintenance requirement light on a 2015 Rav4 3.6L. Holding the display down while turning the ignition on, off, on, and resting the car
In This Article...
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Why does my Rav4 indicate that maintenance is needed?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How soon after an oil change does the oil light turn off?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.
If it’s filled with oil, why is my oil light on?
Your dashboard will light up to resemble an old-fashioned oil can when your car alerts you to an oil issue. Get to a safe location and shut off the engine right away if the oil light turns on while you are driving. You need to stop driving your car because you might be out of oil. That might result in a breakdown, endangering you and other motorists. Driving while your oil lamp is on and pushing your luck might seriously harm your car’s engine.
If your oil lamp has illuminated, you should check the following:
- If the oil pressure is low, that could also turn on your oil light. Low oil pressure indicates that the pump isn’t moving enough oil through the system or that there isn’t enough oil for the pump to circulate. Because the oil is crucial to maintaining the lubrication of the surfaces, if the oil light illuminates and the pressure is low, pull over and shut off the engine.
- Check the oil level after you’ve parked your car in a secure location. The dipstick can be used for this. The dipstick should be removed, cleaned with a cloth, and then reinserted into the car. You can have a low oil issue if the dipstick is dry or has little to no oil on it. Do not restart the engine if this is the case.
Driving with low oil pressure or low oil levels might damage your car’s engine and eventually cause it to fail. When the oil light comes on while you are driving, stop right away and fix the issue. One danger signal that demands attention is this one!
We encourage you to call Wiygul Automotive Clinic at 1-866-702-8050 if you have any questions.
On a Toyota Rav4, how do you turn off the check engine light?
If the problem or code that caused your Toyota RAV4’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
How should I respond if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released