You must first park the 2014 Toyota Corolla in a secure location that is out of the way in order to reset the oil light. Without actually starting the car, turn the key to the “on” position. The trip button or stick must then be located on the instrument display and pressed until “travel A” is shown. After completing that, you must switch the ignition off. The key must then be turned to the on position without the vehicle being started while you continue to grip the trip button or stick. The message “Resetting maintenance data” will appear, and after that, everything will be reset. Following an oil change, you will need to perform this each time.
In This Article...
How can you turn a Toyota Corolla’s oil light back on?
till you release the button “On the screen, Trip A can be seen. then replace the key to “Off. Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles.
How is the oil level checked in a 2014 Toyota Corolla?
20142019 Oil Level Check Corolla S 1.8L 4 Cyl. Toyota
- Remove Dipstick – Find the oil dipstick, take it out, and clean it.
- Reinstall the dipstick, take it out, and then check the oil level.
- More Information – More details regarding the oil level.
How can I turn off the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
What does a 2014 Toyota Corolla “maintenance necessary” mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How often should an oil change be performed on a 2014 Toyota Corolla?
Toyota suggests changing the oil and filter in your 2014 Toyota Corolla every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are right for your car.
How can the oil life on a Toyota Corolla be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Does the need for maintenance equate to a check engine light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.
Why is the maintenance required indicator on my car flashing?
If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.
A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.
You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.
Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.
Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!
Why does my car mention that it needs maintenance?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How often should the oil be changed in a Toyota Corolla?
The Toyota Corolla has a longstanding reputation for being a durable vehicle. Because of this, Corolla models that are more than ten years old are still being driven today. With the right maintenance and care, your Corolla will survive for many more years. Taking your car in for routine oil changes with your service provider is one strategy to extend the life of your vehicle.
There are still a lot of questions about how frequently you should have the oil changed in your car, even though the majority of dealerships provide a suggested mileage or return date. You can find the suggested oil change schedule, which is roughly every six months or 5,000 miles, in the Toyota guidebook that came with your Corolla.
However, many motorists choose to replace their oil more frequently, taking their vehicles to the shop every three months or 3,000 miles. It’s generally reasonable to presume that you need an oil change if you are unsure of when your last one was and can’t recall when it was done.
How much oil is required to replace the oil in a Toyota Corolla?
Follow these instructions to replace the oil:
- Look for the drain oil plug by climbing underneath the Corolla. It is located beneath the engine.
- Slide the drain plug with the oil collection container underneath. The drain plug should be loosened using a socket wrench and a 14-mm socket.
- You can fully loosen and remove the plug to hasten the procedure by waiting until the oil begins to drain from the engine.
- Once the oil is finished, you must find the oil filter.
- Remove the oil filter using a socket wrench or other removal tool and an oil filter socket.
- Wait until all extra oil has finished draining before emptying the oil from the filter into the pan.
- Clean the area surrounding the oil filter fitting on the engine block using a rag.
- Then, take a clean rag and dab some fresh oil on it. Wipe the new oil filter’s edges clean with this oil.
- Reverse the removal instructions to install the new oil filter.
- Reinstall the drain plug and make sure not to overtighten it while doing so.
- The oil cap is located on top of the engine when the hood is opened. Add 3 to 4 liters of fresh oil. Take your time when adding fresh oil to prevent spills and/or overfilling.
- Check the dipstick after you’ve filled it to make sure you have the right amount of oil.
The maintenance light needs to be reset, last but not least. Turn the key to the accessory (ACC) position to accomplish that. Turn off the key after setting the odometer to mileage rather than trip. As you turn the key back to ACC, press and hold the button you used to switch to trip. While you press and hold the button, the light ought to blink.