Robert Paul Van Beets’s photo of a dashboard with a speedometer is courtesy of Fotolia.com.
I’ve had to turn off the maintenance is necessary light on my Toyota Camry twice as a current owner. Both incidents happened soon after getting an oil change. It can be a little frightening because my initial thought was that there might be a significant issue with my automobile, but it turned out to be something quite minor. The oil in your car can be tracked by Toyota vehicles to determine when it needs to be replaced. This is accomplished by having a maintenance light that activates after 5,000 miles and must be manually reset after an oil change. If you get your oil changed at the dealership, they can handle this, but if you do it yourself, you’ll need to know how to reset the light.
In This Article...
Step 1
Turn to the ACC point, which is the first notch you come to, after inserting the key into the ignition. You won’t be able to start the engine or switch on the dashboard lights at this point, but you should be able to turn on the radio to make sure you are where you need to be.
Step 3
Turn the ignition key one more turn toward starting the vehicle while maintaining pressure on the odometer button. The car won’t start, but the dashboard lights will come on.
The dashboard lights will not turn off unless the trip odometer button is held in. It will take five to ten seconds to do this. Now that the maintenance-needed system has been reset, the warning light shouldn’t remain on while you are driving. If it does, go through the procedure again. Contact the dealer if it stays on because you might have a major issue that needs fixing.
How can you turn a Toyota Camry’s oil light back on?
Instructions for Toyota Camry to reset maintenance light
- Switch to position one after inserting your key into the ignition.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button.
- Pull back on the odometer button, then turn the key.
What does a 2007 Toyota Camry maintenance required mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can you turn a Toyota’s maintenance needed light back on?
Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why is the Camry’s maintenance required light on?
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How soon after an oil change does the oil light turn off?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.
Why does my automobile warn me that I need to change the oil when I recently did?
The Driver Information Center may display the Change Engine Oil Soon notification (DIC). Your oil needs to be changed soon if the DIC displays this notice. Be sure to reset the Oil Life System each time the engine oil is changed because the Change Engine Oil Soon notification is based on the last time the settings were reset.
The computer system in your car tells you when to change the oil and the filter. Instead of real mileage, this interval is based on engine revolutions and temperature. Every time the oil is changed, the oil life system needs to be reset in order for it to function effectively.
The CHANGE ENGINE OIL SOON notification will activate when the system determines that the oil life has been reduced. When this occurs, the oil should be changed within the following 600 miles as quickly as feasible.
The system needs to be manually reset when the oil is changed by performing the following:
- Start the car’s engine.
- To view the vehicle information, press the Driver Information Center MENU button.
How is the oil light reset after an oil change?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.