- Press “Choose the “Gear icon on the information display by pressing the Left or “Right Arrow.
- When you want to access “Vehicle Settings,” use the Up/Down arrows.
- Press and maintain the “the OK key.
- Toggle to “Oil Maintenance” using the Up/Down arrows, then click “OK”.
- Press “OK” after selecting “Yes”.
In This Article...
After an oil change, how do I reset my Toyota Highlander?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can the maintenance needed light be turned off on a 2007 Toyota Highlander?
When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- Switch off the ignition.
- As you restart the ignition, press and hold the odometer button.
- Without starting the engine, turn the ignition to the on position.
- Once the entire miles is displayed, press the odometer button.
- Your maintenance light ought to briefly flash before going out.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.
How can you turn a Toyota’s oil light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.