Put the Corolla’s keys in. Find the “travel reset button” on the odometer, then push and hold it. Till “Trip A” shows on the screen, keep pressing the button. Reset the key to “Off” after that.
In This Article...
The maintenance light on my 2018 Toyota Corolla needs to be reset.
Put the maintenance light out.
Corolla, Toyota Activate the lock on the “OFF position; do not start the vehicle. the trip reset button next to the odometer is pressed and held until “On the main screen, Trip A may be shown. Reverse the key to “OFF. Turn the key back to the “on” position while pressing the button to reset the trip “position of ON.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
What does a 2013 Toyota Corolla’s maintenance need mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Why does the maintenance required message on my Toyota Corolla?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Why is the Toyota Corolla’s maintenance required light on?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Why does the maintenance required message on my 2010 Toyota Corolla?
No, it flashes to remind you to replace your oil and filter every 5,000 miles. The
Resetting the maintenance-needed light is simple. On most Toyotas, you can just:
Check to see if the odometer is showing a reading. (On some models, the trip-meter “A” is responsible.
The trip meters’ reset button should be pushed and held. (Same button as the navigation button)
Turn the key back to the “on” position while continuing to depress the reset button, but do not:
the “start” position, that is. A succession of dashes should appear on the odometer display.
that gradually vanish. A string of zeros will appear after they have all vanished.
Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear.
The vehicle should no longer display a maintenance-required signal, and it will now count toward
Why does my car mention that it needs maintenance?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.