Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
In This Article...
How To Turn Off the Toyota Maintenance Required Light
The Toyota Maintenance Required Light can be easily reset, albeit the procedure may differ depending on the model year if it hasn’t already been done by your service specialist. Always refer to your Toyota owner’s manual for a detailed step-by-step procedure.
To navigate settings, use the left or right arrow on the steering wheel.
How can the oil life of a 2021 Toyota Corolla be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
What does “maintenance necessary” on my Toyota Corolla mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How accurate is oil life percentage?
Your neighborhood shop, which had a vested interest in keeping your automobile coming back every 5,000 kilometers, used to provide the answer to the question of when you need to replace your oil. These days, an automobile’s oil life monitoring system is increasingly routinely used to provide an answer to this query. This warning often appears between 8,000 and 13,000 kilometers, saving drivers money and lowering the amount of oil that is disposed of. How dependable are these systems, though? Oil life monitors are pretty trustworthy, according to studies, but they are not nearly as “set it and forget it” as sellers would have you believe. Continue reading to find out how to maintain your oil life monitor correctly and avoid needing to pay for expensive repairs.
The maintenance is needed light is on why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How often should your oil be changed?
This is a wonderful question, especially in light of the widespread false information regarding the recommended percentage for changing your oil. When the oil life indication on your car is between 40% and 15%, it’s time to change the oil.
The % of oil life indicator on your car basically tells you how long it will be until it no longer operates at peak efficiency.
Some auto repair shops advise changing your oil every three months to six months, or every 3,000 to 5,000 miles. Although this may be a decent general guideline, the frequency of the service will ultimately depend on the weather, the road, and the driver.
Jerry is a registered broker who provides end-to-end assistance. Jerry will give you comparative quotes from dozens of the best insurance providers in the market in less than a minute. We handle all the correspondence and phone conversations, and we can even assist you in terminating your previous policy. It has never been simpler to save money.
Can I drive my automobile even though it needs maintenance?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.