How To Reset Maintenance Required Light On Toyota Fj Cruiser

For many years, Toyota automobiles have utilized a standardized procedure to turn off the maintenance-needed indicator. The light is intended to blink on the instrument panel at 4,500 miles to alert the owner or driver that it’s time to replenish the oil and filter (plus inspect and replace other components at the respective mileage interval). The LED stops blinking after 5,000 miles and stays on until it is reset. After an oil change, the light must be reset to notify the owner when the next oil change is required.

Step 3

When the real odometer reading appears, press the reset odometer button. The actual odometer setting will be displayed after the FJ Cruiser displays “Trip A” and “Trip B.”

Step 4

Turn the ignition key one more click forward while keeping the odometer reset button down with one hand. Without the engine running, this position will turn on all of the electrical fixtures and the instrument panel lights.

Step 6

Let release of the odometer reset button once six zeros have replaced the vanished dashes.

Start the FJ Cruiser’s engine to make sure the instrument panel’s maintenance required light isn’t still on. Perform the reset sequence once more if it is still the case.

How To Turn Off the Toyota Maintenance Required Light

The Toyota Maintenance Required Light can be easily reset, albeit the procedure may differ depending on the model year if it hasn’t already been done by your service specialist. Always refer to your Toyota owner’s manual for a detailed step-by-step procedure.

To navigate settings, use the left or right arrow on the steering wheel.

What should I do to remove the maintenance is required light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can I remove Maintenance Minder?

Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.

Resting Honda Maintenance Minder Light

Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.

st Method

The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…

Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.

nd Method

On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.

In order to see the oil life percentage shown on the dash, press the down arrow button.

Hold down the reset button while waiting for the cancel or reset options to appear on the dash.

Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.

rd Method

Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.

You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.

Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

How often should I have my FJ Cruiser’s oil changed?

Toyota advises changing the oil and oil filter in your FJ Cruiser every six months or 5,000 kilometers (depending on vehicle year and oil type).

You will need a flat area, a container to catch the used oil, enough fresh oil to fill the container, a new oil filter, and an oil filter wrench to remove the old one in order to change your oil.

changing the oil

  • Find a good spot to park the FJ first. After that, engage the parking brake.
  • Next, check the oil drain plug that is situated beneath the engine. You should hoist your FJ into the air using a jack and jack stands so that you have easy access to this plug.
  • Using a socket wrench, remove the oil drain plug, making sure the old oil collection mechanism is below the plug. Wait until all of the oil has released itself.
  • Locate your oil filter next, then remove and replace it with an oil filter wrench.
  • The oil drain plug should then be replaced, being careful to hand-start it and not cross-thread the bolt.
  • The new engine oil should then be poured into the engine through the opening on top.
  • once the appropriate quantity of oil has been applied. Your FJ Cruiser should be started and left running for a while.
  • Check your oil dipstick after turning off your FJ to make sure the engine has the appropriate amount of oil. Additionally, check for leaks on the floor beneath the engine.

Although changing your engine oil is a relatively simple procedure, it is essential to ensure that your car is performing at its best.

Why does my Toyota state it needs maintenance?

  • Now the light will read “MAINT REQD.”
  • The ODO display will briefly flash before beginning to display only zeros.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • If the car is on, turn it off.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

Can I drive my automobile even though it needs maintenance?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.

What does “maintenance necessary” on your car mean?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

The meaning of the maintenance reminder light

A: The Maintenance Minder does more than just signal when to change the oil. The Maintenance Minder is intended to serve as a reminder for all maintenance needs. You should perform the suggested service and reset the Maintenance Minder light if your Maintenance Minder indicates that maintenance is necessary.

What is meant by maintenance minder?

When an oil change and routine maintenance are required, the Maintenance Minder System employs the on-board computer to continuously monitor the engine’s operating characteristics, including speed, engine temperature, ambient temperature, time, and vehicle use.