Keep your Toyota Solara in good condition by getting routine oil changes and staying on top of other basic maintenance. Most likely, the mechanic simply neglected to reset the light, but the problem is simple to resolve.
Observe these instructions to reset the maintenance light on a Toyota Solara:
- To choose your odometer, press the trip button on the instrument cluster’s left side.
- Turn the key to the on position and depress the trip button.
- Shut off the vehicle.
- Switch the ignition to the “on” position, but don’t push the starter.
- The maintenance is necessary light should flash and then go away.
Why not spend an extra minute using the Jerry app to save hundreds on your auto insurance while you’re turning off the maintenance light on your Toyota Solara?
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new coverage and even canceling your existing policy when you discover a lower cost for your Toyota Solara.
In This Article...
What does a 2007 Toyota Solara’s maintenance light mean?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
The check engine light on my 2006 Toyota Solara needs to be reset.
Leave the key in the “on” position after turning it. Position while the cable is off for two minutes. two minutes later, turn the key off. Reconnect the negative cable next.
How To Turn Off the Toyota Maintenance Required Light
The Toyota Maintenance Required Light can be easily reset, albeit the procedure may differ depending on the model year if it hasn’t already been done by your service specialist. Always refer to your Toyota owner’s manual for a detailed step-by-step procedure.
To navigate settings, use the left or right arrow on the steering wheel.
Why does my car indicate maintenance is needed following an oil change?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What does the Toyota’s dashboard’s orange exclamation point signify?
Look for the horseshoe-shaped light with an exclamation mark in the middle since a flat tire can ruin your day. This warning light means that your Toyota’s tires need to have air added, therefore you should go to a dealership or service center. If you don’t, your car may be more prone to getting a flat tire. Additionally, because the tires won’t spin as smoothly, it will decrease your fuel efficiency.
How can you turn a Toyota Camry’s service engine light back on?
Instructions for Toyota Camry to reset maintenance light
- Switch to position one after inserting your key into the ignition.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button.
- Pull back on the odometer button, then turn the key.
What does the 2007 Toyota Camry’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
Even though my automobile says maintenance is necessary, can I still drive it?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
Why does my Toyota’s maintenance indicator constantly flashing?
Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.
Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.
The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):
Is the check engine light the same as the maintenance necessary light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.