How To Reset Maintenance Light On Toyota Highlander

Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.

How can you turn a Toyota’s maintenance needed light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

How can I turn off my Toyota’s maintenance light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How do I get rid of my maintenance obligations?

How Can the Maintenance Required Light Be Reset?

  • Turn on your car. Look at your dashboard when your key is in the on position.
  • Press the Trip Meter Reset Button after turning off the engine.
  • Re-start the vehicle.
  • Keep pressing the reset button.
  • Reset button released

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

What does the Toyota Highlander’s maintenance required light mean?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.