a 2018 Toyota Rav4’s maintenance light should be turned off. Put the ignition on with your key. Turn the key to the first position. On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds. Hold the odometer button down for another five or so seconds. Release the odometer button after it is off.
Insert the key into the ignition to turn off the maintenance light on a 2018 Toyota Rav 4. To reset the trip meter, press and hold the button. the “on” position on the engine switch. Hold down the trip meter reset button until “000000” appears on the trip meter. Resetting the maintenance light.
In This Article...
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I remove Maintenance Minder?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
Why does my Rav4 indicate that maintenance is needed?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
Why does my maintenance light come on after I change the oil?
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
The maintenance light on my 2018 Toyota Corolla needs to be reset.
Put the maintenance light out.
Corolla, Toyota Activate the lock on the “OFF position; do not start the vehicle. the trip reset button next to the odometer is pressed and held until “On the main screen, Trip A may be shown. Reverse the key to “OFF. Turn the key back to the “on” position while pressing the button to reset the trip “position of ON.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
The meaning of the maintenance reminder light
A: The Maintenance Minder does more than just signal when to change the oil. The Maintenance Minder is intended to serve as a reminder for all maintenance needs. You should perform the suggested service and reset the Maintenance Minder light if your Maintenance Minder indicates that maintenance is necessary.
What is meant by maintenance minder?
When an oil change and routine maintenance are required, the Maintenance Minder System employs the on-board computer to continuously monitor the engine’s operating characteristics, including speed, engine temperature, ambient temperature, time, and vehicle use.