When changing the oil in your Toyota Tacoma, the mechanics can fail to turn off the maintenance light. You will therefore need to fix it yourself in order to get it working again. Let’s thus determine how to reset this maintenance light.
In This Article...
For 2005-2011 Model Years
Right, this is an old Tacoma. It will be a similar process if you have a model from 2005, 2006, 2007, 2008, 2009, 2010, or 2011. So let’s get started right away.
- Hold on to it until it says “complete” and then release it.
- Then check to see if ODO is displayed on the dash screen at the bottom of the odometer. Aim to return to ODO if your vehicle displays TRIP A or TRIP B.
- Start by turning the key.
- The key can now be turned off.
- Then, with the key off, push the ODO/TRIP button. When turning the key back on, you only need to turn it to the on position; you don’t need to crank it.
For 2012-2017 Model Years
While turning the key to the ON position, do not start the vehicle.
When starting your car, push the START/STOP button twice without pressing the brake pedal.
Be sure TRIP A is visible on your screen.
You will then need to click this ODO/TRIP button for the odometer until TRIP A appears.
- Depress the key.
- Turn the ignition back on while continuing to depress and hold the ODO/TRIP button.
After that, when you’re holding this ODO/TRIP button you’re going to click the key back forward to make it on without turning the engine
Hold the ODO/ TRIP button for continued use.
Hold the button down until all of these little dashes disappear, followed by the zeros, and then release it.
For 2018-2023 Model Years
The new Tacoma (model years 2018, 2019, 2020, 2021, 2022, and 2023) resets the maintenance light in a different method than its predecessors. So, here is the procedure.
- In contrast to its predecessors, the new Tacoma (model years 2018, 2019, 2020, 2021, 2022, and 2023) has a different method to reset the maintenance light. Thus, this is how it’s done.
How can you turn off the Toyota Tacoma’s maintenance-needed light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How do I get rid of my maintenance obligations?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
What does the Toyota Tacoma’s maintenance required light mean?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How can the oil light on a 2005 Toyota Tacoma be reset?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down until the odometer shows “000000 is shown before the initial value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.
What does the 2008 Toyota Tundra’s maintenance required light mean?
Every 5,000 miles, the “Maintenance Required” oil change indicator light on the Toyota Tundra will come on. This maintenance light is merely a simple reminder that it’s probably time for an oil change at your neighborhood Toyota Service Center, not an emergency. When you’ve traveled 5,000 miles since the last time you reset your odometer, this maintenance light will automatically come on in your instrument cluster. This indicator is present in every second-generation Toyota Tundra pickup vehicle, so whether you own a new or used Toyota Tundra, you will probably notice it occasionally.