2. Verify the displayed odometer reading. Turn off the ignition.
3. Set the ignition to run while maintaining pressure on the trip meter reset knob (one position before starting engine).
4. Keep the knob depressed for at least 5 seconds. “000000” appears on the odometer, and the light turns off. The LED will keep blinking if the system can’t be reset.
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
In This Article...
How can you turn off the Toyota Tacoma’s maintenance-needed light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How do I get rid of my maintenance obligations?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How do I disable maintenance required?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the maintenance needed light be turned off on a 2007 Toyota Highlander?
When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- As you restart the ignition, press and hold the odometer button.
- Your maintenance light ought to briefly flash before going out.
- Once the entire miles is displayed, press the odometer button.
- Switch off the ignition.
- Without starting the engine, turn the ignition to the on position.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.
Why is still on my maintenance light?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
Meaning of “maint reqd”
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
How can the oil light on a 2005 Toyota Tacoma be reset?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down until the odometer shows “000000 is shown before the initial value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
Why does my Toyota’s maintenance indicator constantly flashing?
Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.
Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.
The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.