This belongs in the category of “very old news, but I’m writing it for a purpose. Her maintenance request light was on, so I just received a call from a customer asking to book a 5K service. We recently completed a service roughly 2,000 miles ago, according to my review of her paperwork. Oops! It’s ridiculous, I know. She agreed to reset the light herself, so I promised to send her some instructions.
I had originally planned to copy and paste some instructions off the internet since, well, why recreate the wheel? Anyone who is familiar with tech support is probably also comfortable using Google and copying and pasting.
The trouble is, none of the directions I discovered truly appealed to me. There were numerous places where the reader could become perplexed and make mistakes. I therefore made the decision to draft my own directions. My instructions might end up being just as poorly written as the ones I found in the Google highlighted snippet. I occasionally experience editing blindness. When I proofread I read what I was thinking, not what I actually wrote. You be the judge, I say.
In This Article...
Yet another version of: How to reset the maint req light on a 2004-2009 Prius
1. Switch on the power to “By *not* stepping on the brake pedal and twice pushing the power button, the ON position is selected.
2. Push the ODO/TRIP button underneath the dash display until the mileage is displayed (not Trip A or Trip B)
3. Switch on the device’s power “by *not* stepping on the brake pedal and pressing the power button once to the OFF position.
4. Push the ODO/TRIP button and hold it down. Hold on till Simon commands.
5. Switch on the appliance “By *not* stepping on the brake pedal and twice pushing the power button, the ON position is selected.
6. Hold the ODO/TRIP button down until the odometer displays “000000.
7. And that’s it. You can release the ODO/TRIP button, according to Simon. The next time you Ready the car, the maintenance necessary light must be off.
How can you reset the Prius’s code in 2005?
To reset your check engine light and resolve your automotive issues, follow these steps:
- Holding the ODO button while braking and turning off the engine. After that, restart the vehicle once more with the brake and ODO engaged.
- As soon as your car is off, insert the key fob into the ignition.
- To start the car, depress the power button while maintaining braking pressure. While pressing the odometer trip button, keep the brake pedal firmly down.
- A countdown will begin after the ODO meter on the digital display changes to dashed lines.
The odometer will flash 000000 when the dashes reach their rightmost position. The lights will then be reset after it comes back on.
What does the Toyota Prius’ red triangle mean?
Regular maintenance should be second nature for all car owners, especially since the majority of new automobiles alert us when an oil change is necessary or our tire pressure is low. The “red triangle of doom” on a Toyota Prius, however, resembles the check engine light on conventional combustion engines.
The warning light may just indicate low oil pressure, or it may indicate something more. Your initial course of action should be to have the codes scanned and diagnosed in case your hybrid car is dealing with a more serious problem.
Common Causes
The most frequent reason for a red triangle of death light on a Prius, according to several owners, is a problem with the battery. P0A80 and P3000 are frequently the codes that appear following a diagnostic.
The battery control system of the Prius is identified by the P300 code. This code indicates a fault with the HV battery’s ECU, albeit the reason of the issue is generally complicated. Your Prius may exhibit any of the following symptoms:
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
What does “maintenance necessary” on my car mean?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What does “maint reqd” on your car mean?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
How can you turn a Toyota’s maintenance needed light back on?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my car indicate maintenance is needed following an oil change?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Option A: Go to Autozone
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
Option B: Drive until the Light Goes Off
Even though it’s not advised, occasionally driving the car for a few days enables the car to perform a self-check. It will turn off the check engine light on its own if it determines that the issue has been fixed or is no longer a problem. You must identify and address the issue that is resulting in the code if the light returns.
This choice carries a risk even if it doesn’t cost anything or take any extra work. Driving on a car with a major issue for a number of days could seriously harm it. Always be cautious and ascertain the cause of your check engine light’s on-time as soon as you can.
How long does a car computer take to reset?
You should drive for at least 100 miles after resetting your computer to pass an emissions test so that the computer can retrain itself on your driving patterns. There are a few things you may do to help you pass the test if you don’t have time to complete this.
Prior to bringing your automobile in for the test, make sure it is warmed up. To get the engine up to operating temperature, you must drive it for at least 30 minutes.
Second, stay away from quick journeys as much as you can in the days before the test. The computer doesn’t have enough time on these excursions to make the necessary adjustments.
Thirdly, monitor your gas mileage. It may be a clue that your car is not operating as efficiently as it should be if it lowers drastically.
In a Toyota, what does a red triangle with an exclamation point signify?
The seat belt warning light resembles someone who is buckled in. When neither the driver nor the front-seat passenger is wearing a seat belt, this light illuminates. Once everyone has buckled their belts, the light should go out. Master caution indicator: appears like a triangle with an exclamation point inside of it.
What does the exclamation point in a red triangle mean?
On a black screen, your phone can show an exclamation mark enclosed in a triangle. On an Android smartphone, the bootloader menu is where you often access this screen, which is known as recovery mode. The most frequent reasons for problems with recovery mode are after the device has been rooted or when a custom ROM has been loaded.
To exit recovery mode and restart your phone normally, follow these steps:
- If your phone has a battery, take it out, wait five seconds, and then put it back in.
- To perform a power cycle on a phone that doesn’t have a detachable battery, follow these instructions: Up until the Phone Options display, press and hold POWER. Wait for the phone to completely shut off after selecting Power Off. Press and hold the POWER button for a short period of time to turn the phone on.
- Activate the gadget.
- If the recovery mode reappears, hold down the volume up button while pressing the power button.
- Press the POWER button to choose Reboot system after highlighting it with VOLUME UP or VOLUME DOWN.
Some software problems can also be fixed by a factory data reset. See Reset a device to factory settings.
Because HTC customizes their phones’ bootloaders and recovery modes, these instructions may not work with all Android phones. Contact an HTC service center if none of these suggestions work.