The jack and tools should be located in the trunk under the lid. When changing the studs on a Toyota Corolla, you must jack up the car.
In This Article...
2
Purchase a fresh wheel stud that is the same size as the old one. If you’re unsure of the size, wait till you’ve taken it off and bring it with you to the store to make sure you purchase the proper one.
3
The Corolla should be jacked up, and the tire directly across from the jack should be blocked. Remove the brake unit and the tire. Remove the emergency cord and assembly if the wheel is in the back. Remove the drum if your vehicle has drum brakes rather than disc brakes. When using drum brakes, you might have to take the hub off in order to reach the stud with a vise.
4
In order to have more access to remove and replace the stud, look for an opening on the hub’s back. Ensure that the stud fits properly in the aperture.
5
The stud should go rearward through the aperture after being struck with the mallet. Once it’s through, replace it by slipping the new wheel stud into the void. From behind, insert the stud.
6
Two wheel bolts with slanted edges outward should be positioned on the stud’s end closest to you in order to seat it. As you tighten them, you’ll see that they push the stud through the opening. Continue tightening the stud until it is flush with the hub at the back.
7
After changing the stud on your Toyota Corolla, finish the process by returning all the components to the wheel in the same sequence they were taken off. To complete, tighten the wheel nuts.
Photo 1: Pull the broken wheel stud
Behind the hub, wrap the remover around the broken wheel stud’s head. When the stud pops out the back, center the driving screw over it and tighten it with a ratchet.
Photo 2: Pull in the new wheel stud
When the head of the wheel stud is flush with the back of the hub, stop tightening. On the new stud, screw in the second lug nut (the one you didn’t throw). It will go on more easily. Utilize a torque wrench to tighten.
Above all, avoid hammering the damaged stud out. The worst thing you can do is that! The hammer blows might destroy your wheel bearings, making this a considerably more expensive repair. Instead, use the removal tool to squeeze the fractured stud out (Photo 1). The challenge is getting it to move because it is staked into the hub. The rest is simple once it moves. In order to angulate the stud into the hole, rotate the hub until you locate a deep depression. then make it work. After that, add many washers to the stud and tighten the lug nut. To insert the staked piece of the new stud into the hub, tighten the lug nut (Photo 2).
You’ve probably already strained the threads or harmed the bevel at this point. So throw away the nut; it’s inexpensive. Remove the brake dust screen if you can’t get the new stud into the hub (drill out the rivets and replace them with stainless steel screws, nuts and thread-locking adhesive).
What is the price of a new wheel stud?
New wheel lug studs typically cost between $4 and $12. Labor is not included in this price; it will probably cost you between $61 and $77.
You can drive it safely when going a short distance to a repair shop or auto parts merchant if only one stud is damaged or missing. However, it is generally advised to leave your car parked while the replacement is being produced.
While getting this part changed will cost you some money, reviewing your auto insurance coverage will allow you to save money in other areas.
Jerry is here to help with all of that. A certified broker who provides comprehensive support, this amazing software gathers reasonable quotations, enables plan switching, and even enables cancellation of your old policy!
Is it safe to drive with a damaged wheel stud?
Can I operate a vehicle with a damaged wheel stud? may be mind-boggling. However, you should never operate a vehicle with a damaged wheel stud because doing so puts extra strain on the wheel and harms other components.
Driving is safe if one lug nut is missing but the other ones are still in good condition. Just be sure you get to the repair shop right away.
Driving With A Broken Wheel Stud
Driving with a broken threaded fastener is risky since it puts more pressure on the tire. The other lug nuts will loosen and fall off as a result of the added pressure on the bearing studs.
Driving With A Missing Lug Nut
What happens if a lug nut comes off? Is it safe to operate a vehicle without a lug nut? Yes, driving for a short time without a lug nut is perfectly safe.
However, as soon as you realize a lug nut is missing, you should bring your automobile to a reputable auto repair facility. Losing the lug nut puts too much pressure on the hub and the mechanical bearing, causing them to break down too soon.
Long-term driving without getting a new lug nut will result in far higher costs than buying a new wheel stud.
Therefore, it would be preferable to perform routine inspections so that you can quickly replace any missing nuts or catch any that have become loose.
What could result in the breaking off of wheel studs while driving?
You have every reason to be anxious about getting behind the wheel of your car once more considering the possibility of losing a tire! Usually, if you have a loose wheel on your automobile, the wheel studs won’t fall off while you’re driving. The problem most likely started when you last had new tires installed. The loose wheel could be the result of over- or under-torquing the lug nuts when the tire was placed.
Even if your wheel is still linked to your automobile, you shouldn’t drive it until the issue is resolved. A broken wheel stud replacement normally costs between $100 and $125 and takes only a few minutes to complete. To find out more about the price of repairs and, maybe, the cost of hauling your automobile to the shop, contact your mechanic.
Concerned that something similar could occur again? Jerry provides consumers with a subscription to modern roadside assistance. For as little as $4.16 a month, you can obtain standard perks like benefits and tracking for the progress of your service similar to Uber, as well as direct contact with your service provider.
How long can you continue to drive without a lug nut?
Wheel nuts, commonly referred to as lug nuts, are used to secure a wheel in position. There may be four, five, or six lug nuts on your car. This depends on the kind of vehicle you drivea tiny economy sedan, an SUV, a truck, or a sports car, for example. Larger cars will have more lug nuts because they are designed to withstand a specific level of pressure. Some automobiles have sensors for loose wheel nuts right out of the box. These enable you to detect loose lug nuts. Since most automobiles lack such sensors, it is wise to check for loose lug nuts as a preventative measure.
If any lug nuts are found to be loose, you should have them tightened in accordance with the manufacturer’s instructions. Tighten any lug nuts that are loose using the lug wrench that was provided with your car. If one is available, using a torque wrench is strongly advised. Because a torque wrench gauges the amount of force used, you may relax knowing that your lug nuts are securely fastened.
The pressure exerted while driving will be dispersed to the remaining lug nuts on the wheel if you lose a lug nut. If a lug nut is missing, you can still drive legally, but you need to get to the closest tire shop right away. The other lug nuts may eventually become worn out from this added pressure. Wheel bearings may suffer a consequence of this. Wheel bearings may prematurely wear out since they will be put under extra strain.
Car wobbling is a common issue when a lug nut is missing from a vehicle. The remaining lug nuts may become loose, and the wheel studs may break, as a result of car wobble and the increased strains put on the vehicle during turns, braking applications, and acceleration. The lug nuts were then used to bolt in the wheel studs above them.
We advise having a loose lug nut tightened as soon as possible if you are driving with one. It is imperative that you have a missing lug nut replaced as soon as possible if you must drive with one. Due to the additional strain placed on the remaining lug nuts when driving with a missing lug nut, it may be risky. In addition to damaging the lug nuts and wheel studs, this pressure may also cause the other lug nuts to come loose.
See our article on Lugs, Nuts, and Bolts if you’re interested in learning more about how wheels are secured.
Can you operate a vehicle without one lug nut?
A wheel nut, also known as a lug nut, is used to tightly fasten the wheel to the car. Your car may have four, five, or six lug nuts, depending on the kind. Some cars include indicators for loose wheel nuts so you can grab the lug nut before it comes off. Since other cars do not have this sensor, it is a good idea to regularly check the lug nuts to see if any are loose. Make careful to have the lug nut tightened as soon as you can if you notice a loose lug nut.
Here are some things to know about the risks of driving with a missing lug nut in case it is already too late:
Larger automobiles typically have more lug nuts since they can withstand greater pressure. Pressure must be applied to the remaining lug nuts after you lose one of them. The other lug nuts on the wheel may eventually become worn down as a result.
There will be uneven pressure on the wheel hub if just one lug nut is missing. Wheel bearings may be affected by this. The pressure on the wheel bearings will have to be greater than on the other sides, which could result in early deterioration. Since changing a lug nut is less involved than repairing a wheel bearing, you should do so as soon as you realize one is missing.
A missing lug nut might make the car shake, which is one of its risks. The car will tremble because the pressure is not equally distributed. The car will also be under pressure as it brakes, accelerates, or makes sharp curves. When all of these occur at once, additional lug nuts may lose their grip or the studs may break. The lug nuts fasten to the studs, which hold the wheel in place. Therefore, the wheel could come off if the stud snaps. The studs typically fracture before they break, but if the fractures are too big, they will break. You can be in risk, as well as the cars nearby.
It is crucial to get a replacement lug nut installed as soon as possible if one is missing. Due to the added strain on the wheel, driving with a missing lug nut has the potential to be hazardous. This force could harm the studs and lug nuts, as well as harm the wheel bearings. These issues may cause a wheel to come off.