With the proper equipment, you can replace your headlights on your own, especially if you’re changing your high-beam lights. It may be simpler and safer to contact an auto body shop to replace your low-beam lights because doing so is significantly more difficult. The following tools are required for a DIY headlight repair on a Toyota Corolla:
- the screwdriver (low-beam bulb only)
- a headlight 9005 high-beam bulb
- a set of low-beam LED headlights
- socket 10 mm (low-beam bulb only)
Changing a high-beam bulb:
- Push the replacement bulb into the housing after inserting it into the electrical plug.
- Pull the lightbulb out by rotating it counterclockwise, pressing the tab on the electrical plug, then turning it clockwise again.
- Make sure your headlights are functioning correctly by testing them.
- Locate the bulb by opening the hood. The headlight assembly should be in front of it.
Since your entire light assembly needs to be replaced, replacing your low-beam lights is much trickier. To replace them, you’ll have to take the car’s grill and light assembly off. Once more, it is strongly advised to get your low beams changed at an auto body shop.
While hunting for new insurance shouldn’t take as much time as replacing your headlights, it often does. Your insurance should occasionally be updated and changed, just like old lightbulbs. Use the Jerry app to quickly locate and compare rates and plans from leading insurers.
In This Article...
How is a headlight changed on a 2006 Toyota Corolla?
- Headlight Bulb in Step 1. To open the hood, find the handle.
- Pull the latch up by reaching beneath the hood at the front where there is a tiny notch.
- Find the lightbulb.
- Assembly should be twisted 45 degrees counterclockwise and pulled out straight.
- Pull while lifting the lock up.
- Repeat steps 3-5 to remove the other bulb after you’ve located it.
Do the Toyota Corolla’s headlights use LED technology?
If you drive a Toyota Corolla from 2014 or later, you’re surely aware that LED headlamps are a standard feature.
Describe an HIR2 bulb.
CI1255 HIR2 halogen bulbs are frequently found on Lexus and Toyota automobiles. The UV-reduced HELLA halogen automobile bulbs are secure for use in contemporary headlamps with polycarbonate lenses.
What distinguishes high beam from low beam?
Low beam intensity and reach. Low beams have a lower intensity and cover less ground in front of your vehicle. High beams have a high intensity and cover more ground.
Will Autozone change the bulb in my headlight?
To be clear, buying a headlight or tail light for a vehicle at AutoZone is pretty simple if you have the part number for it or simply know the make, model, year, and occasionally even the trim of the car. When you visit a dealership or repair facility, labor is frequently added to the cost of the headlamp.
If your headlamp is easily accessible to the installer and is in most cases, Autozone will replace it.
How much does a headlight bulb cost?
Halogen bulbs typically cost $20 each and function just as well as the factory-installed, original equipment bulbs. The standard halogen bulb, as it is known in the industry, is frequently installed by automakers. Halogen replacement bulbs, however, come in a range of brightness levels, from basic to premium.
How much time does it require to change a headlight bulb?
Some automobiles require five minutes to change a bulb, while others are a complete pain. One-piece units appear to need the assembly taken apart. The unit’s bottom has a challenging bolt. With two hours of daylight, you should be fine.