It was extremely simple. Open the Highlander’s back door and take off the plastic compartment cover. The bolts and nuts holding the assembly to the automobile will be exposed. Be careful not to drop any nuts into the cavity when you remove the nuts. The bulbs can be taken out, and the tail light assembly can be pulled off once all the nuts have been removed. Replace the nuts, attach the new assembly, then reattach the lamps. Easy.
In This Article...
How much does a Toyota Highlander backlight replacement cost?
Replacement headlight bulbs for a Toyota Highlander typically cost between $59 and $68. While parts are priced at $27, labor costs are predicted to range between $33 and $41.
How is a tail light assembly changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.
Why is my Toyota Highlander’s brake light on?
- Electric Power Steering Warning: If you notice an exclamation point next to a steering-wheel icon, your power steering isn’t working properly. Turn off the car and move it to a safe location. If the light is still on after starting your car again, don’t continue traveling and contact your local Toyota dealer right away.
- Parking Brake Warning: If your parking brake is engaged when you turn on your car, this light will come on so you may release the brake before setting off on your trip. This light seems to be “ON YOUR DASHBOARD, PARK
- As soon as you notice this light, which merely states “Brake System Warning,” “The signal BRAKE indicates a problem with your braking system. Turn off the car and stop it in a safe place. Make an instant call to your local Toyota dealer if the light doesn’t go out.
- Your tire is low on air if you notice the symbol of a horseshoe with an exclamation point in the center of it, which is the tire pressure warning light. To get your tire’s PSI to the right level, you should stop at the closest gas station and use the air pump.
Can I replace my own tail light?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
How is a tail light assembly taken out?
Safety Advice
Always use safety eyewear when performing maintenance on your car. When necessary, put on additional personal protective equipment (PPE), such as latex gloves or closed-toe shoes.
Locate the tail light assembly on the rear of your car. When you use your brakes or turn signal, they illuminate on each corner.
Remove any mounting screws that are present on the exterior of the tail light assembly, if necessary.
How much does a new tail light assembly cost?
Cost of replacing a tail light Expect to pay between $200 and $500 if you elect to have a professional replace your tail light assembly. If you own a high-end luxury or performance vehicle, the cost of the job may increase.
AutoZone does it replace brake lights?
Problems with the brake light switch or turn signals A replacement switch can be placed after you check the connection to the switch for corrosion or other problems and buy it at your neighborhood AutoZone.