The process of changing the starter on a 2004 Toyota Corolla is explained in the steps that follow. The Corolla, Matrix, or Pontiac Vibe from 2003 to 2008 might also use these instructions.
In This Article...
Where is the starter located on a Toyota Corolla?
On a Toyota Corolla, the starter is located directly over the oil filter. as shown in this picture. The oil filter, which is dusty orange/black and out of focus, is in the lower left corner of the image. In close proximity to the image’s center is the starter with the solenoid attached.
After that, unplug the solenoid’s electrical connections. One of these is a plastic connector that needs to be removed by pushing down on the side tab with your thumb or a flat-head screwdriver.
Next, unscrew the bottom and top 14mm bolts that are holding the starter in place. To reach the top bolt, you might wish to use a socket extension (3).
Delete the outdated starter. Use a rubber mallet to give it a few whacks if it doesn’t come loose right away. The old starter, after removal, is shown here.
The new starting will take over the same spot as the previous one. Reinstall the bolts in the opposite direction.
Reconnect the negative battery terminal after replacing the starter.
You really can complete this task on your own, I assure you. Do yourself a favor and make the repair yourself to save a few hundred dollars.
How much does a Toyota Corolla starter replacement cost?
Estimated price for replacing a Toyota Corolla starter. Replacement starters for Toyota Corollas typically cost between $273 and $434. While parts are priced between $212 and $358, labor is predicted to cost between $61 and 77.
How much should a starting replacement cost?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- either permanent magnets or electromagnetic field coils
- Solenoid
- Brushes
- Commutator and armature
- gear for the starter
- Switch fork
- bushes and bearings
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, like those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you truly believe that your repair bill was overpriced, you can always challenge it.
What occurs when a car’s starter fails?
It frequently makes a grinding noise when the starter drive gear is worn out or not engaging properly. This sounds a lot like the sound you make when you unintentionally turn the ignition switch back on after starting your car. The engine flywheel could be harmed if the grinding symptom is ignored.
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. Here’s how to replace an automobile starter:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cablethe substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How long does a starting replacement take?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
A 2004 Toyota Corolla starter costs how much?
For your 2004 Toyota Corolla, we now have 6 Starter items, with prices ranging from $118.99 to $195.99 in our inventory.
I don’t want to remove my starter, but how can I test it?
Using jumper cables to disengage the car’s electrical system is the simplest approach to examine the starter. With the engine off and the transmission in “park,” carefully attach one end of the red/positive jumper cable to the battery’s positive terminal.
What symptoms do a failed starting motor show?
5 Symptoms Of A Failing Starter Motor: A Sluggish Start
- Engine Refuses to Start. The engine refuses to start.
- Although the starter turns, the engine is not powered. The starter turns the engine, but nothing happens.
- Sounds of grinding. Within the cabin, there was grinding.
- Smoke or odor while starting.
- Lights start to fade as you begin.
How much does an AutoZone starter cost?
Starting at $50 up to $350, rebuilding parts for a starter can be expensive. A new starter might cost anything between $80 and $350.
Can AAA replace a starter?
Numerous service requests can be assisted by AAA, which provides a wide range of services. If your starter stops working, AAA will tow your car to a repair shop of your choice. The extent of your membership determines your coverage limits.
Can AAA test my alternator?
Certain battery services, such as testing the battery or the vehicle starting and charging systems or attempting to jump-start it, may be offered by AAA road service specialists for non-starting automobiles. Your technician can replace your battery right away if it is not a AAA battery. In their trucks, battery techs keep batteries for the majority of vehicle models. The cost of the batteries and maybe any further labor are your responsibility.
Will AAA bring me coolant?
With its extensive range of services, AAA can assist with a wide range of service demands. In the event that your car needs coolant, AAA will tow it to the repair shop of your choice. Your membership level will determine the coverage restrictions.
If my car’s starter is damaged, will it jump start?
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery is what gets boosted by a jump start, not the starter.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
For a proper diagnosis and solution to the problem, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
What noise does a dead starter make?
Loud clicking is the telltale sign of a faulty starter. A quick pace, such as click-click-click-click-click-click-click, or a slower lilt, such as click, click, click, can be heard. If you hear either of these noises when a part failsand no other component doesyou’re probably going to have to pay for a new starter.
It might be a battery or alternator problem.
When trying to start your car, a loud clicking sound may indicate an issue with the electrical system. It’s possible that your battery is dead or that the alternator, which charges the battery, is malfunctioning.
The starter, a small motor powered by the battery that starts the engine, is unable to maintain power if the clicking noise is electrical in origin. Instead, it makes a clicking sound and switches on and off quickly.
Remember that in situations like this, a starter that doesn’t work properly is only a sign of the problem. Your automobile’s electrical system is probably to blame, which is why a jumpstart could briefly move your car.
Once it’s operating, have an experienced technician inspect the entire electrical system. Your alternator or battery might need to be replaced. Alternately, the issue might be resolved by simply cleaning the battery terminals of corrosion to improve the battery’s connection.
You’re not the only one having issues with your automobile battery. According to AAA, among the top three reasons members call for roadside assistance are battery issues, with the majority of those calls occurring in the summer.
With a Courtesy Check and free battery test* at Firestone Complete Auto Care, you can prevent a failed battery or an electrical problem.
No battery is included.
What malfunctions in a starter?
The most frequent causes of starter failure are natural wear and tear or operator (or installation) mistake. The magnetic “brushes” that ride around the armature inside the starter might become worn down over time. The starter solenoid, which is located slightly outside the main casing and permits electricity to pass through the starter, is susceptible to mechanical sticking and arching as well as being exposed to damagingly high temperatures. It is not long for this world if you ever see or smell smoke coming from the starter, therefore you should get in touch with a technician right away.