You can avoid paying a hefty repair charge from a garage or dealership by replacing the starting motor in your 1997 Toyota Corolla on your own. In order to remove the starter, which is located at the front of the engine compartment, you must work from above and only use simple hand tools that you might already have in your toolbox or garage. Most auto parts dealers have replacement starters, which have warranties ranging from one year to the lifetime of the vehicle.
In This Article...
Step 1
Locate the air cleaner hose that runs over the top of the engine when you open the hood of your Corolla. Snap the hose’s end out of the air box, then remove it and set it aside. Locate the negative battery cable end where it connects to the terminal by moving to the battery. Lift the cable off the battery after removing the holding bolt using a tool.
Step 2
Find the starter motor on the engine’s front. It is located between the radiator and engine block on the driver’s side of the engine compartment, close to the bottom of the block.
Step 3
After loosening the locking tab, unplug the wiring harness connector from the solenoid’s rear and set it aside. Slide the wire off the post after removing the nut from the “B terminal” on the solenoid’s back.
Step 4
Slide the starting out of the bell housing by removing the upper and lower mounting bolts from the starter’s snout. Starter can be removed from the engine area and placed aside. Slide the nose into the bell housing after lowering the new starter into position.
Step 5
Using a torque wrench, insert the two mounting bolts into the bell housing and tighten them to 29 pound-feet. After placing the retaining nut on the “B terminal, slide the single wire with the ring connection onto it, and then tighten it with a socket and ratchet. Connect the wiring harness connector to the starter solenoid connector.
Snap the air cleaner hose into place after repositioning it over the engine to the air filter. After attaching the negative battery wire to the negative battery terminal, use a wrench to tighten the retaining bolt.
- Toyota Motor Corporation; 1997; “Toyota Corolla Factory Service Manual”
- ratchet wrench
- Adapter set
- tool set
- Ratchet
For a 1997 Toyota Corolla, what is the cost of a starter?
We presently stock 6 Starter items to select from for your 1997 Toyota Corolla, and our inventory prices range from as little as $99.99 up to $189.99.
How much does a Toyota Corolla starter replacement cost?
Estimated price for replacing a Toyota Corolla starter. Replacement starters for Toyota Corollas typically cost between $273 and $434. While parts are priced between $212 and $358, labor is predicted to cost between $61 and 77.
How much does an Autozone starter cost?
Starting at $50 up to $350, rebuilding parts for a starter can be expensive. A new starter might cost anything between $80 and $350.
How much should it cost to replace a starter?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- Switch fork
- Commutator and armature
- gear for the starter
- Brushes
- bushes and bearings
- either permanent magnets or electromagnetic field coils
- Solenoid
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you truly believe that your repair bill was overpriced, you can always challenge it.
What occurs when a car’s starter fails?
It frequently makes a grinding noise when the starter drive gear is worn out or not engaging properly. This sounds a lot like the sound you make when you unintentionally turn the ignition switch back on after starting your car. The engine flywheel could be harmed if the grinding symptom is ignored.
Can I change a starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cablethe substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How can I tell if my starter is defective?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
Why does starting something by tapping it work?
This works because as the brushes deteriorate, an insufficient electrical contact results. The brushes are pushed back into position so they may make contact once more by lightly pressing the rear of the starter with the hammer.
I don’t want to remove my starter, but how can I test it?
Using jumper cables to disengage the car’s electrical system is the simplest approach to examine the starter. With the engine off and the transmission in “park,” carefully attach one end of the red/positive jumper cable to the battery’s positive terminal.
How is a starter bypassed?
In bypass starting, you apply a wrench or a screwdriver to the starter motor’s terminals, a tractor’s solenoid, or the terminals of other machinery. All tractor-neutral starting switches are bypassed by this. As soon as the circuit is complete, the starter engages, and the engine starts, sparks fly and electricity snaps.
How long does a mechanic need to change a starter?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
Will a starter simply stop functioning?
Over time, starters do degrade or stop working. However, if you bring your car into an auto repair shop, the experts might ask you about the warning signals that it’s on its last legs.
How can you know if the starter or battery is the problem?
Let’s start by diagnosing this problem since it is the least expensive and easiest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is likely the culprit if a jump starts the car but it won’t start once it is turned off.
Why did my car battery die?
Consider checking to see if you may have left the vehicle’s interior or exterior lights on or if a door may not have closed all the way. We’re confident you already did this as soon as the problem began. Open the hood and inspect the battery terminals if the problem wasn’t caused by the lights. You may only need to give the terminals a brief clean with a toothbrush and some baking soda solution if you notice corrosion (a white powder-like substance) there. Still not an issue? Think about the battery’s age. The average automobile battery lasts 4-5 years. Have your problem diagnosed as soon as possible if your battery is less than four years old and has no other problems. If the problem is with the battery, you might be covered by a warranty and be able to get a replacement. If the diagnosis reveals that your battery is in good condition, the problem may be with the alternator.
The next step is to inspect the alternator if there doesn’t appear to be anything wrong with your battery yet it won’t maintain a charge.
What’s the lifespan of an automobile starter?
You are aware when your car needs an oil change. But starters are unexpected, much like many auto parts. No two starters will last the same amount of time, and most of the time you won’t know your starter is failing until your car won’t start one day and you need to call for help. They could have a lifespan of 200,000 kilometers or only 30,000. As a result, mileage isn’t really a reliable indicator of how long a starter will survive. Neither is time. What more is there, though?
How Many Starts?
Again, this figure can fluctuate substantially. As a general rule, a brand-new starter with no flaws should last for roughly 80,000 starts. Since starters normally last longer in warmer regions, automotive problems are more likely to occur on the worst day of the year, when you need your car the most. However, considering that 80,000 is a sizable amount, you shouldn’t worry about it until it breaks because it could not ever require replacement. If you simply use your car to get to and from work every day, you would only need 480 starts in a year, not counting holidays.