Although it takes some effort, changing the headlight bulb on a Toyota Tundra from 2014 to 2019 is doable by the average person.
Although the Toyota manual describes how to remove the bulb by entering the wheel well, most customers find this to be too difficult.
By removing the electrical plug rubber boot and releasing the wire spring, it is simple to replace the bulb itself.
- Socket, 10mm
- Screwdriver, flathead
- 9003 headlight bulb, new
To remove the plastic inserts holding items in place, use a Flathead screwdriver.
Avoid touching any headlight bulb with your fingers when changing it since the oil in your hands might cause a hot spot that reduces the bulb’s lifespan.
- Locate the bulb behind the headlight assembly by opening the hood.
- On the top of the grill, four 10mm bolts must be removed.
- On either side of the top of the grill, two plastic push clips need to be removed.
- Slide the grill’s top over the tabs on the top.
- Reach behind the gill inside the vehicle on each side and press down on the tab on the end of the long plastic piece holding it in place.
- The grill can be pulled out thanks to certain additional points holding it in place.
- The grill should be taken off and placed aside.
- The corner bumper should then be removed as it is secured by two push clips and two 10mm bolts in the wheel well.
- When the push tabs and bolts are taken out, the side corner will simply pop off.
- Two 10mm bolts at the top of the headlamp assembly need to be removed.
- At the bottom right of the headlamp assembly, remove one 10mm bolt.
- Headlight assembly removal
- Pulling straight off the electrical plug will remove it.
- Pull out the rubber boot and remove it.
- The wire spring can be compressed to release the headlight bulb.
- Test it after changing the headlight bulb.
- Reinstall in reverse sequence.
On a Toyota Tundra from 2014 to 2019, changing the headlight bulb is not difficult, but it requires more work than usual because more parts must be removed.
Climates can alter how quickly an automobile ages, which might effect whether bolts rust or cause other potential issues.
A car that has been in an accident could also have some unanticipated issues.
In This Article...
What is the price of a Toyota headlight replacement?
Estimated cost to replace the headlight bulbs on a Toyota Corolla. Replacement headlight bulbs for a Toyota Corolla typically cost between $73 and $85. Between $46 to $58 is the projected labor cost, while $27 is the estimated cost of the parts.
H16 bulb: what is it?
The H9/H11 bulb family includes the H16 automotive light bulb, which is very similar to the H8, H9, H11, and H15 bulbs. It is distinguished by having three metal tabs evenly placed around the base to lock it in place, a standard right-angled style connection input base, and a sizable rubber o-ring beneath the metal tabs.
The wattage levels that they operate at and whether or not they have a painted-on reflector cap at the top of the glass tube make up the biggest differences between H8, H9, H11, and H16. The H11 is more frequently used in headlights than the H16 is in fog lights. As a result, you’ll see H11 bulbs that resemble H16 bulbs almost exactly but have higher wattages and slightly different pin configurations. However, with a little finagling, you could swap an H16 and H11 around if you really wanted to.
Where does the confusion between H16 and 5202 bulbs originate? First off, there weren’t many vehicles in America that used an H16 bulb until very recently. Then, there was probably some confusion after an uninformed light bulb manufacturer in Asia decided one day that they didn’t know what a true H16 bulb was. They began classifying 5202 light bulbs as H16, 5202, 9009, etc. as a result of a series of events. This is incorrect! You will never come across an H16 OEM bulb that resembles a 5202 from Sylvania, Philips, or another manufacturer. Here are a few well-liked LED variations of these many bulbs:
Tundra received LED headlights when?
When Toyota unveiled the OEM LED facelift headlights in the middle of 2017, it was clear that we would soon be able to provide them to our OEM+ sort of customers along with a plug-and-play conversion harness. Here it is for you!
A projector headlamp is what?
In the field of headlamp technology, projector headlights are a more recent development. They were originally widely utilized in several high-end vehicles in the 1980s. Projector headlights have since gained popularity on all different kinds of automobiles.
Reflector headlights and projector headlights are similar. They have mirrors that serve as reflectors and a bulb inside a steel bowl. An additional lens in a projector headlight, however, serves as a magnifying glass, boosting the brilliance of the light beam.
There is also a cutoff shield to guarantee that the light emanating from these headlights is oriented correctly. This aids in pointing the light towards the direction of the road. Projector headlights have an extremely sharp cutoff because of the shield.
For good reasons, projector headlights are becoming more and more common. They offer a number of benefits:
- Only projector headlights can be used with xenon HID bulbs. In reflector headlights, where the light they create can blind other vehicles, HID bulbs are too bright.
- They’re more vibrant. Compared to reflector headlights, projector headlights are noticeably brighter.
- They have a lower chance of blinding other motorists. Projector headlights don’t shine in other drivers’ eyes because they are pointed downward at the road.
- A more even light is produced by projector headlights. There may be darker patches in reflector headlights.
Will Autozone change the bulb in my headlight?
To be clear, buying a headlight or tail light for a vehicle at AutoZone is pretty simple if you have the part number for it or simply know the make, model, year, and occasionally even the trim of the car. When you visit a dealership or repair facility, labor is frequently added to the cost of the headlamp.
If your headlamp is easily accessible to the installer and is in most cases, Autozone will replace it.
Are you able to replace a headlight bulb on your own?
Fortunately, changing a headlight is frequently simple. The majority of the high-intensity discharge (HID) or light-emitting diode (LED) bulbs used nowadays are easy to swap out. They are secured by rotating bayonet-style retainers or tiny wire clips. They can be removed from the wiring, rapidly pushed out from behind the headlight housing, and replaced with a functional bulb. But before you can replace a headlight, you must figure out what kind of bulb you require. Your owner’s manual should be your first port of call.
Q: Will A 9005 Bulb Fit An H11?
Yes, with a few simple alterations, the 9005 to H11 conversion is achievable. However, because both serve distinct functions in the automotive lighting unit, it is best to avoid combining them.
Q: Is The H11 The Same As 9005?
Despite having an L-shaped design in common, the two bulbs are incompatible. The 9005 is a high beam light with a high illuminating capability, while the H11 is a single low beam light. Additionally, they use different amounts of energy; the 9005 uses 65W, which is on the higher end, and the H11 uses 55W.
Q: Is A 9005 Bulb High or Low Beam?
A separate socket is provided for the low and high beam bulbs in in-vehicle models of the 9005 low beam bulb. Advanced versions can use headlight bulbs with high and low beam settings, such as the 9007.
Q: Can I Use 9006 Instead Of H11?
The 9006 and the H11 are incompatible, therefore you cannot use it in place of the latter. They both have an L-shape and are low beam bulbs, but they have different pin arrangements, making a perfect match impossible.
Q: Can I Use 9006 Instead Of 9005?
The pin configuration makes it impossible to convert from 9006 to 9005. The 9005 can, however, be slightly modified to fit into the 9006’s socket. You can tell which is a low beam by comparing 9005 and 9006; the former is a high beam.
Q: How Many Lumens Is A 9005 Bulb?
The 9005 is among the brightest lights you might come across, which is why high beam settings are where it is most frequently used. It ranges in lumen value from around 1700 to 2000.
Q: Can I Use Fog Lights As Headlights?
In poor weather, such as rain, fog, or heavy snow, the fog lights work in conjunction with your headlights. Fog lights aren’t a good substitute for headlights because of their limited optical range.
Can I substitute H11 with H16?
The H16 bulb is physically identical to the H11 bulb in terms of shape. It is therefore safe to assume that an H11 bulb will fit the socket properly if you install it in place of an H16 bulb.