On a Toyota Camry, replacing a tail light is simple, quick, and doesn’t require any special tools. Important safety elements like tail lights and brake lights let cars behind you see you and understand when you are stopping or turning. They must therefore be maintained as a result. Take a few minutes to replace your tail lights’ burned-out bulbs if necessary. Replacement bulbs are available at the Toyota dealership or at any car parts store.
In This Article...
Step 1
Locate the tail light assembly covers to the right and left of the trunk lid when you open the Camry’s trunk. Plastic and a rectangular form define the cover. It hinges to the outside edge and snaps open on the inside edge.
Step 2
Locate the light bulb sockets inside by opening the tail light assembly cover. Turn the socket counterclockwise to release it from the assembly, then remove the socket that goes with the damaged light. The turn signal is located in the top bulb, the stop light is in the second, the running light is in the third, and the backup light is in the final bulb.
Step 3
Straighten out the socket and remove it from the assembly. Take the lightbulb out of the socket. Straight out of the socket, the bulb can be thrown away. A new bulb should be inserted and pushed in until it is completely seated in the socket.
Step 4
Turn the socket clockwise until it stops, securing it in place, then insert the socket and bulb into the tail light assembly. Make sure the cover snaps shut to ensure security as you seal it. This will assist in preventing moisture and debris from entering the tail light assembly.
Ensure the lights are operational before closing the trunk. Before testing the lights, you must repeat the procedure on the opposite tail light if both of your lights are out.
How much does a Toyota Camry’s brake light replacement cost?
Replacement brake light switches for Toyota Camry models typically cost between $78 and $108. Between $45 and $57 is the expected cost of labor, while between $33 and $51 is the estimated cost of parts. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
How much is a bulb for a rear brake light?
Anyone can learn how to replace a broken brake light. A replacement bulb costs approximately $10, and doing it yourself will save you about $20 in labor costs as well as the time it would take to drive to the shop and wait for the work to be completed.
How is a tail light bulb changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.