I’ll demonstrate how to open up your Toyota 4Runner key fob and replace the internal battery in this brief lesson. It is quite simple to do at home. A flathead screwdriver and one of these CR 2016 batteries are all that are required. I’ll put a link to Amazon’s lowest pricing in the description if you want to order one of these online and have it delivered straight to your door. We can start this right away after you have your screwdriver and one battery.
Looking at the top of the gadget, where you can see a small depression in the plastic, is the first thing we want to accomplish. You will feel the gadget sort of crack open if you take your flathead screwdriver, insert it in the hole, and then twist. This battery may be removed rather simply by setting the back piece of plastic to the side. Simply move it back, and it will begin to emerge. Use your fingers to pull it out. You may also simply press it down while trying to pry it up with the flathead corner of your tool and it will pop out.
If you don’t know where to find a brand-new CR 2016 battery, feel free to check the description. Slide the battery out, get rid of the old battery, and then slide the battery back in. Make sure the text-covered side of this positive side is facing up. All that’s left to do is reassemble the two parts of the device by sliding that downward and clicking the top into place. Once everything is put back together, you are ready to go. I sincerely hope this video was helpful to you. Please let me know if it was by giving this video a like or by leaving a comment below.
In This Article...
What kind of battery does a key fob for a Toyota 4runner take?
I’ll walk you through how to remove the key fob from your Toyota 4Runner and replace the internal battery at home in this brief lesson. This procedure is quite simple. One of these CR 2025 batteries and a standard flathead screwdriver are all that are required. Now, if you’d want to purchase one of these batteries online, I’ll provide a link in the description that will take you to Amazon, where you can purchase the exact battery you require for this gadget at the best price. So go ahead and look that up, and after that, let’s get started.
The top of the gadget should be your first point of focus. You can see that the plastic is going to take a small groove or indentation. We could use a coin for our flathead screwdriver as well. And what we want to do is stick a screwdriver into that spot, twist it, and this thing will start to fall apart. And you can just set the plastic piece from the back aside.
This object will be turned over by me. As a result, the bottom is pointing upward since I want to place my tool precisely in this small space. To carefully pry the battery out so you can pull down on it to move it in the appropriate direction, I’m going to use the corner of this flathead screwdriver. And after that, I’d like to simply push the battery down and pry it out from underneath. And as you could see, it emerged immediately.
Not that challenging. I’ll demonstrate that once more. So now everything is nicely in place. In order for it to pass that tiny lip on top, I’m going to keep it down and sort of pull it down. I’m just going to pull it down and lift it up using the flathead screwdriver’s corner to get under it.
Of course, it will be simpler if you have a smaller screwdriver, such as a little precision screwdriver or something smaller than what I have. But you can remove this battery rather quickly with whatever you happen to have laying around. Therefore, go ahead and grab a fresh battery. This is a CR 2025 once more. Check the link in the description if you’re not sure where to buy one of those.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
How can I remove my Toyota key fob’s key?
Over the key portion of your key fob is a tiny metal button. Pull out the key and press that button. Unlock the fob. Open the fob by inserting a small screwdriver or another flat tool into the little slot that the key fits into.
Can you do it yourself to program a Toyota key fob?
Although buying a remote control straight from Toyota will save you time from having to reprogram it yourself, learning how to program a Toyota key fob yourself will allow you to save money. Fortunately, it’s a short and simple process. Avoid being locked out of Evergreen Park without a functional key!
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
What happens if the battery in my key fob dies while I’m driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
Can a dead key fob battery still start a car?
- On your key fob’s back, search for a little sliding button. You can slide the key fob cover off or click a button to do so. To get it to release, you might need to use your fingernail and a little force.
- Use the mechanical key to unlock the door after you get it. If your door doesn’t have a key slot, it’s likely concealed beneath the handle cover. To access the key slot, carefully remove the handle cover by using the key.
Now that you’re inside, here’s how to start the car with a dead key fob:
- Close the key fob after inserting the mechanical key once more.
- Press the START button with the key fob. Instead than pressing the button with your finger as usual, push the key fob against it. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
- Some vehicles have a secret key fob slot that can be used to start the engine. For instance, the backup slot is located inside the cup holder in some Ford models. Your fob will fit perfectly in the slot. Use the push button start as usual after inserting the dead key fob into the holder.
- Check the steering column for a physical key slot if neither of these approaches succeeds (some Mazda models have this feature). To start the car, place the mechanical key within the keyhole.
What is the price of a new key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialist shops and dealers frequently change the battery without charge.
How long do the batteries on a Toyota 4Runner last?
Batteries for Toyota 4Runners typically last 3-5 years, however this might vary based on the battery type, weather, driving style, and other factors. Cleaning the terminals and posts of corrosion with the proper cleaning solution and a wire brush will help your 4Runner battery last longer.