The wheel nuts may become loose while the car is moving if there is foreign material on the wheel contact surface, which could lead to the tire coming off.
After mounting the tire, manually loosen each wheel nut by roughly the same amount.
Tighten the wheel bolts when swapping out a steel wheel for another one made of steel until the tapered piece separates from the disc wheel seat.
Tighten the wheel bolts when swapping out an aluminum wheel for a steel one such that the tapered portion is in loose contact with the disc wheel seat.
Turn the wheel nuts until the washers touch the disc wheel when swapping out one aluminum wheel for another.
Each wheel nut should be snugly tightened two or three times in the order depicted in the figure. 105 Nm of tightening torque (10.7 kgfm, 77 ftlbf)
vehicles with spare tires mounted on wheels of the same design as the installed tires: Put the wheel ornament back in place.
On a Toyota 4Runner, where is the spare tire located?
A Toyota 4-Runner’s spare tire is hidden beneath the rear bumper. Both good and bad things can be said about this area.
The advantage is that it increases your load capacity while preserving the vehicle’s ground clearance. However, for some people, removing the tire may take more time and effort.
It can be difficult to remove the tire if you are changing your own tires. First of all, a 4Runner’s tires are hefty, and the final stepremoving the chaincan be difficult.
Second, it may take some experience to achieve the ideal angle with the straight bars. You will miss the slot underneath the vehicle if you approach it too straight. However, you will feel the bar lock into place when you are at the proper angle.
How may a wing nut be taken off a spare tire?
Pull the wing bolt out. If the wing bolt is difficult to release, use the hooked end of the wheel nut wrench extension as a wrench. then remove the spare tire from the trunk.