It’s best to have your tire replaced before you get on the road because blowing a tire can be a frustrating experience. However, your Toyota Fortuner comes with everything you need to change a tire if you really don’t have the time.
To remove the spare tire from your Toyota Fortuner, follow these instructions:
- Step 1: Locate the compartment with a switch and a handle on your left side by opening your trunk.
- Step 2: To reach the tools within, turn the switch horizontally and pull on the handle. Find a set of jack, wrench, and pry bar tools.
- Step 3: Insert the pry bar into the gap that is just below the latch on the trunk lock, and lock it there by inserting the chain.
- Step 4: Counterclockwise turn the pry bar
- As you turn the tire, be sure it is descending.
- Step 5: After the tire touches the ground, remove the chain and raise the tire off the car.
These instructions should assist you in removing the spare tire from your Toyota. However, your owners handbook contains further instructions if you’re still unsure or want more detailed information.
Take a moment to save on auto insurance with Jerry because you’re already spending the effort to learn more about your vehicle. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few questions, and Jerry will compare prices from more than 50 leading suppliers and send the best offers directly to your phone for no additional cost.
In This Article...
Where can a Toyota Fortuner be jack-up?
Each Toyota car has a unique location for the jack and wrench. Forger and Innova The Fortuner’s Jack and Wrench are located on the left side behind the third row.
Without a jack, how can a tire be changed?
One person can carry out this tire-changing procedure without the need of a jack, though caution is always advised in case the automobile slides. Drive the vehicle onto a block that is situated on the same side as the flat. As a precaution, make sure the emergency brake is engaged and, if you have wheel chocks, position them behind the other two wheels. In a genuine emergency, dig out the dirt surrounding and beneath the flat tire using a shovel or even your hands. Once you have enough space to change the tire, continue digging. Once more, remove the lug nuts, switch the tires, install the new lug nuts, and then gradually tighten. Until you can drive out of the hole, fill it in. Remove any wheel chocks before releasing the emergency brake. Once all four tires are back on the ground, drive off the block and finish tightening the lug nuts.
Contact a Tire Repair and Replacement Expert in Denver Today
While understanding how to change a tire is essential, being able to do so without a jack might be useful. But calling an emergency roadside repair service for mobile flat tire repair is the best course of action for replacing a flat tire when you don’t have a jack.
How much time can I spend using my spare tire?
With a donut-shaped spare tire, you should not travel faster than 50 mph or farther than 50 miles. Long-distance driving with a spare tire could potentially harm the transmission and other components of the car.
How do spare tire locks function?
The spare tire lock functions with your car’s ignition key, just like all other BOLT Locks. You only need to spin the lock once after inserting your key for it to remember it forever.
How is a wheel lock key used?
Key for wheel lock
A word of caution: Never use power tools to unlock your car’s wheels. The wheel lock and wheel lock key may be damaged or stripped by the power tools’ excessive force, rendering them ineffective.
Step 1: Verify that your car is in park. Use the parking brake to increase safety.
Align the key with the nut in step two. Set the wheel lock key’s splines in alignment with the wheel lock on the wheel.
To do this, insert the wheel lock key into the lock and carefully turn it until the tabs or pattern match up. The wheel lock key will automatically latch into place.
Step 3: Squeeze the wheel lock key with your lug nut wrench. It has a six-point hexagonal head and ought to be the same size as your car’s wheel nuts.
Step 4: Counterclockwise turn the lug nut wrench. This will loosen the wheel lock, albeit it might take some force to remove it from the wheel.
Step 5: Manually deactivate the wheel lock. You ought to have no trouble disabling the wheel lock manually after loosening it.
Floor jack or bottle jack: which is superior?
On the other hand, bottle jacks are positioned vertically, and their simpler construction enables them to lift more weight to greater heights. These jacks are also substantially less expensive than floor jacks, smaller, and easier to store.
Bottle jacks may be the perfect option for truck owners in particular because clearance is frequently not an issue and easy storage is feasible in the cab compartment. Bottle jacks are particularly helpful in an emergency because of their portability because they can be easily transported to the spot.
However, because of their small frame, bottle jacks are less stable than floor jacks and offer a less reliable alternative for challenging activities. Bottle jacks also have a limited lift height, which could be problematic when using them with vehicles that have standard clearance.
Which is preferable, a bottle jack or a trolley jack?
I hope you can identify the parallels and differences between the bottle jack and trolley jack after looking at their respective features, benefits, and drawbacks. The similarities and differences between bottle jacks and trolley jacks must be understood in order to increase your chances of purchasing the appropriate item for your automobile application.
Height is the main area of disparity. We usually advise using a bottle jack if your car has a high ground clearance. On the other hand, a trolley jack will be considerably better if your automobile has limited ground clearance.
Just be aware that you might frequently need to have a trolley jack as well as a bottle jack. To change suspension parts, for instance, you might boost or jack up the automobile using a trolley jack and keep the suspension to one side of the car with a bottle jack. Therefore, you may have both of these varieties of jacks on hand.
Are floor jacks preferable to scissor jacks?
A jack is typically part of the factory tool kit in cars. A factory jack and a service jack are not equivalent in terms of automobile jack safety for a variety of reasons. A service jack or floor jack is designed for durability and versatility, as opposed to the screw jack or scissor jack that came with your car, which was designed for portability and short-term use.
But let’s explore the key distinctions in more detail:
Capacity
The scissor jack was constructed to fit your particular vehicle, therefore if it was intended for a little sedan, it can break if you try to lift an SUV. On the other hand, floor jacks are available in capacities ranging from two tons and higher, and they can raise anything from an ATV to a bulldozer.
Durability
The scissor jack isn’t anticipated to be used much because it was created for changing flat tires. They are only sufficiently sturdy to complete the task and are often composed of stamped metal. Floor jacks can withstand more abuse because they are made to be used frequently and heavily.
Versatility
The scissor jack was created to carry out the specific duty of changing a tire. To lift the tire a few inches off the ground, it may or may not fit lift points on your particular car, and it might only fit up to a set height. As a result, using it for other tasks like lifting another vehicle or doing an oil change is all but impossible. A floor jack, on the other hand, can rise high enough to reach below the car and can adjust to any vehicle’s lift points.
Don’t expect the scissor jack to be used for anything other than its intended purpose when performing DIY auto repairs. However, if you want to try larger repairs, you should get a floor jack and jack stands that are rated for the heaviest car you possess, keep them in good condition, and constantly think about your safety.
Employ Safe Lifting Practices
Safety should always come first, so think twice before climbing underneath your automobile. Never, whether utilizing a scissor jack or floor jack, place a portion of your body under a vehicle that is only supported by a jack:
- Block: Put the transmission in park or gear, engage the parking brake, and make sure your car is on a flat surface. Use chock blocks to stop the wheels in front and behind the wheel that is opposite where you are elevating. Put chock blocks in front of and behind the right front tire, for instance, if you plan to lift the left rear of the car.
- Lift: Raise the car to the required height using the jack. Use three-quarter inch plywood to prevent the jack from sinking into the ground on soft surfaces like dirt or asphalt.
- Support: Place jack-stands under a sturdy part of the automobile, such as an axle or suspension member, preferably ones that are rated higher than your jack. Shake the automobile to check for stability before lowering it onto the jack stands. You can take the jack out and start working on your car after you are certain that it is stable.
Both scissor jacks and floor jacks have their uses and are incredibly helpful, but when put to use outside of their intended purposes, they can be uncomfortable, if not downright dangerous. Use a floor jack or a scissor jack appropriately, and keep it well-maintained. You can work on just about anything underneath your car safely if you keep in mind these car jack tips.
For routine maintenance and repairs, turn to one of our 17,000 NAPA AutoCare facilities or check out all the tools & equipment offered on NAPA Online. Visit your neighborhood NAPA AUTO PARTS store to speak with a qualified professional for more details on car jack safety.