The oil filter for the 2014 Toyota Camry is situated on the front passenger side’s bottom of the engine. The A64mm 14-flute oil filter wrench is required to remove the cap on the cartridge-style filter that the Camry employs. Place a container below the filter housing to catch the oil that will leak from it once the oil pan has been mostly drained of its oil. The housing drain plug should be unplugged by inserting a 3/8-inch drive extension and ratchet into the hole. Before removing the filter housing cover, let the oil drain from it. Once the cap has been taken off, pull the filter out. At this point, the O-rings on the cap should also be changed.
In front of and to the side of the oil pan on a 2014 Toyota Camry is where you’ll find the oil filter. Replacement oil filters cost between $10 and $20 at an auto parts store.
On a 2014 Toyota Camry, the oil filter is located on the driver’s side door, behind the panel.
In This Article...
Without the equipment, how do you take out a Toyota oil filter?
Toyota oil filters can be taken out using one of nearly four different techniques. To complete your necessary task in a specific fashion, you are free to choose any of the approaches.
Using Sandpaper
The Toyota oil filter can be removed at a low cost by using sandpaper. You may easily create a tight grip over the oil filter by wrapping the sandpaper over it. After ensuring that your sandpaper is well wrapped, simply pull it in the other direction. The force generated produced by doing so will enable you to remove the Toyota oil filter without the use of a wrench.
Antique timing belt and key
This article also includes another helpful technique that involves the use of a key and an old timing belt. Use both of your tools to make a lever, place the belt over the oil filter, hold it in place with a key, and then unscrew it.
Screwdriver and hammer
To remove the oil, a screwdriver and sledge can also be useful. Basically, you need to place the screwdriver’s tip on the oil channel and use a sledge to pound the screwdriver’s base into the anti-clock bearing. The Toyota oil filter would be easily removed using the sledge’s energy.
Three legs adaptor
A three-legged adapter is another tool used for this design. This adapter is included in what is most likely the best tool for removing Toyota oil filters. For this reason, we may state that this tool is the least used, but in any case, it might provide you with a better result than a wrench.
As a result, if you’re wondering How to Remove Toyota Oil Filter without Wrench, all of these tools and techniques can be used.
There is yet another approach that can be advantageous for removing the oil filter without a wrench. But before attempting any of the other ways, this one should be tried.
The first method to try
Sometimes oil filters are loosely fastened, and you can even use your hand to access a Toyota oil filter. Give it a shot and attempt to open the oil filter counterclockwise. Maybe it’d be simple to open. You should use safety precautions and attempt it for this reason. To open the Toyota oil filter with your hands, keep in mind that gloves are recommended.
We should understand the importance of changing the oil filter after learning how to completely remove a Toyota oil filter without a wrench.
Importance of changing oil filter
The requirement to remove the oil filter in order to replace it is a fundamental phenomenon. In order to preserve the car’s reputation and keep the engine in good shape, it’s crucial to change the oil filter.
Facts to remember
Everyone should be aware of a few crucial details before attempting to remove the Toyota oil filter, both with and without a tool.
Verify that your car is chilly and that it was not in drive mode prior to two hours of work.
Before attempting to remove the filter, re-oil it since occasionally it won’t unscrew if there isn’t any oil on the filter.
You should also be aware of the proper technique for removing the oil filter with any instrument. It would be more tightened rather than becoming loose if you were to remove it in the wrong way.
How often should an oil change be performed on a 2014 Toyota Corolla?
Toyota suggests changing the oil and filter in your 2014 Toyota Corolla every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are right for your car.
How long does it take to change the oil in a Toyota Camry?
In general, cars may travel 5,000 to 7,500 miles without having an oil change. Additionally, you can go 10,000 or even 15,000 miles between oil changes if your car uses synthetic oil.