By using these quick procedures, you can start your Toyota 4Runner remotely:
- Your 4Runner’s key fob has a LOCK button. Press and hold it twice within two seconds.
- Then, on the key fob, press and hold the LOCK button for three seconds.
- The engine starts, and the turn signal lights flash repeatedly.
- The engine will operate remotely for ten minutes before automatically shutting off.
If you open any door on your 4Runner while the engine is running after remote starting, the engine will shut off for safety reasons. To turn the ignition on and start your car, a working key must be present within the vehicle.
In This Article...
Has the Toyota 4Runner remote starting?
The 4Runner is current with modern technology. With your connected smartphone or smartwatch, you can start the engine, lock and unlock the doors, and locate your vehicle using Toyota’s accessible Remote Connect * through the Toyota App.
How is a 2020 Toyota 4Runner remote started?
Remote engine start can be added as an aftermarket equipment at some Toyota dealerships. Depending on the dealership, the projected cost of this item ranges from $450 to $750.
Starting and stopping your 2020 Toyota 4Runner is a simple process. Simply press “LOCK on your key fob, click “LOCK twice, and then hold down “LOCK. Your engine should start and the lights should start blinking.
THIS COULD BE USEFUL: To learn how to use remote start on a 2020 4Runner, watch my video review.
Do you anticipate using the 4Runner’s or another Toyota model’s remote engine start feature? Which would you choose: using your key or your phone to start your car? What do you think of the 2020 4Runner’s improvements as well?
Remote Start Operation
It’s simple to use your remote start. To activate the remote start, push the lock button on your manufacturer remote fob three times. The vehicle will start, run for the predetermined amount of timetypically 15 minuteswhile the parking lights flash. The vehicle can be turned off by pressing the lock button three more times. It may take a few tries to get the timing right, so be careful not to push the lock button too quickly or too slowly. Just unlock or open the door as you approach the car. As soon as it shuts down, you may jump in, fire it up, and drive away.
- Simply press LOCK three times on your factory remote to activate the remote starting. 3x Lock from OEM Fob Only = No more remotes to carry. Want a wider range? See below for upgrade possibilities:
- For a range of up to 1000 feet, there are two 1-button remote controls included, and the OEM fob’s three locks also function.
- Comes with (1) 1-Button and 2-Way 2000 feet two-way remote control and one button It will also function with a 1-way for a range of up to 2000 feet and a 3-lock OEM fob.
- Smart Phone App Control enables you to start your automobile from any location in the world using your smartphone. Service plan is necessary; it costs $39.99 per year. The OEM remote fob’s 3x lock will also function.
How do I start my 2018 Toyota 4runner remotely?
The convenience of being able to warm up or cool down the cabin of your car before you get in is one of its main benefits. However, you must first understand how it operates before you can make use of this useful feature. Follow these instructions to find out more if you’re curious about how to remotely start a Toyota engine.
Steps to use Toyota remote engine start
- On your Toyota remote, press the LOCK button.
- Within one second, press the LOCK button once again.
- Your engine will start if you press and hold the LOCK button three times in a row for at least three seconds.
How is a Toyota started remotely?
Press the lock button on your key fob three times to remotely start your Toyota. For the first two presses, make sure you push the lock button quickly, and for the third press, hold the button down for around three seconds.
How can I tell if the 4Runner I have has remote connect?
When you bought your car, your dealer may have let you know if the remote service was offered. As an alternative, you can check your owner’s manual or look for the Remote Connect option under Communications on your Toyota Entune display to see if your vehicle offers Remote Connect.
How can you tell whether your vehicle has a remote starter?
Do you have a remote start for your car? It’s time to learn! Chevy Remote Start is something you have to try to believe. especially if you realize the impact it has on your day-to-day activities. Learn more about Chevy Remote Start’s game-changing features below. You’ll soon start looking for a “Chevrolet dealer nearby.
Remote Start Kit Features
With the help of the Chevy Remote Start app, you can start your car with the touch of a button and even pre-warm or chill the inside. Anti-theft technology and remote keyless entry systems are integrated with Remote Start.
Additionally, you can warm up the engine of your car directly from your phone. This feature enables you to warm up your engine without going outside into the bitter cold to turn it on, which might be crucial in regions with harsher winters. You may reach a level of accessibility and time savings with Chevy Remote Start that is not possible with a conventional manual start.
Finding the Remote Start Button
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
What Models Have Remote Start?
To learn which models feature remote starting, speak with your local Chevy dealer. The remote start option for the Chevy Equinox is available for the LT trim level, and it is included with the Premier trim. Model-specific availability varies.
Has Toyota Smart Key remote starting capability?
The Smart Key fob in your car can be used to start and stop your engine with Toyota’s remote start system. In order to ensure that your car’s interior is at the perfect temperature when you get in and drive to your next location, this feature also lets you turn on the air conditioner, heater, and defroster.
How does remote start work?
In order to remotely start your car:
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. The vehicle will start after two flashes from the external lights.
Can the 2021 4Runner have remote start added?
Get your Toyota 4Runner the best remote starter kit. Most simple installations can be finished in between 15 and 60 minutes. There are no ambiguous diagrams, shoddy wiring, cuts, splices, etc. On your 4Runner, everything is done below the glove box on the passenger side and beneath the dash on the driver side. You may quickly complete the installation by following our simple instructions! Your car will start and operate by simply pressing the lock button on your factory OEM remote three times. The parking lights will continue to be on to signal that the car is still in motion. When you’re ready to start driving, just use the remote to unlock the truck and open the door. When you open the door, your car will turn off; just get inside, start it, and drive away!
- Complete Kit includes ALL necessary parts.
- Simple programming does not require a dealer visit.
- The ONE and ONLY plug-and-play system in use!
- Included are printed installation instructions.
- Easy plug-and-play installation
Remote Start Compatibility Requirements
- Toyota 4Runner, 20202021.
- only an automatic transmission.
- VIN’s 10th digit must begin with a L or an M.
- Vehicle must have a Push Start / Smart Key system.
- Upon opening the door, the vehicle will shut off.
Is remote start available for the 2018 Toyota 4Runner SR5 Premium?
YES! A remote starter can be installed by the user. Do not pay extravagant dealer fees to have the dealer perform services that you can perform yourself. YOU were considered during the design of the Start-Xkit. You, the typical car owner who is capable of performing a few simple repairs.
The T-harness that is included makes installation a lot easier. Wires don’t need to be cut or joined. Plug and play only.
By hitting lock three times on the factory remote, which is included in the base package, you can remote start your vehicle without carrying a separate remote. The distance at which you can lock your car is the same as the range at which you can remote start it.
You can add a long-range RF kit as an option for even longer range. If you really want to go all out, you can select a cell phone module that enables you to begin from almost anywhere that has phone service. The RF kits provide you a second remote that can operate at a considerably greater distance.
Kit contains:
- Module for Remote Starting
- T-Harness
- pry bar
- Snap ties
- Installation guidelines