How To Pair Iphone With Toyota Highlander

Toyota / By

Drivers must develop ways to use mobile devices safely while operating a vehicle as staying connected at all times becomes the norm. With the help of tools like the Entune system, automakers have become more intelligent and improved their vehicles to meet drivers’ shifting technological needs. To make traveling with a smartphone in tow safer and more practical, our team at Hesser Toyota is offering advice on how to sync the iPhone with the Toyota Highlander Bluetooth.

Bluetooth pairing instructions for the iPhone

According to the Highlander Entune system:

  • Hit the HOME key.
  • Choose SETUP (found in the upper right corner of the display screen)
  • Choose BLUETOOTH
  • Select ADD

Using an iPhone:

  • Choose SETTINGS.
  • Click BLUETOOTH.
  • Set the Bluetooth toggle to “ON.”
  • Choose the Highlander system from the available devices.
  • Put in the PIN that is displayed on the Highlander’s Entune system.
  • Click PAIR/OK.

What does Bluetooth do?

Drivers can use Hands-Free Calling, Siri Eyes Free, and music streaming when they pair their devices with the Entune system’s Bluetooth. Without taking their eyes off the road or their hands off the steering wheel, drivers may use voice commands to make phone calls, stream music, or use their preferred iPhone features.

How can I make a phone connection with my Toyota Highlander?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Choose “Settings”
  • Activate Bluetooth.
  • Activate “Scan for devices.”
  • Input “SETUP”
  • Choose “Bluetooth”
  • Choose “Add New Device”
  • To make this system discoverable, click.

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

How can I connect my 2018 Toyota Highlander to my iPhone?

The EntuneTM technology in the 2018 Highlander is compatible with all iPhone models, including the newest iPhone X and the iPhone 5. The pairing procedure could differ slightly from what is described below depending on the model you have.

  • To begin with, make sure Bluetooth is enabled on your phone by going to Settings, choosing Bluetooth, and sliding the toggle to the right (it should turn green).
  • Next, select Setup from the Home screen on the EntuneTM display in your Highlander before selecting Bluetooth. Choose Add. (Note: To pair a new device, your car must be in park.)
  • Return to your iPhone, and your Highlander ought to appear in the list of devices. Select it. (A PIN from the vehicle’s display on your phone may need to be entered or confirmed at this point.)
  • You will be informed on the Highlander display screen if the Bluetooth pairing was successful.

How come my phone and Toyota won’t connect?

The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How can I pair my iPhone with my Toyota’s Bluetooth?

How to Install Bluetooth in a Toyota

  • Make sure your mobile device has Bluetooth turned on.
  • Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

How can I connect my phone to my car?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

Why can’t my iPhone and Toyota pair?

How to Bluetooth Connect an iPhone to a Toyota

  • Make sure Bluetooth is turned on in your iPhone.
  • Go to Apps after turning on your Toyota EntuneTM system.
  • Your touchscreen’s Setup option should be clicked.
  • Select Bluetooth, then click Add New Device.
  • Click Add after locating your iPhone on the EntuneTM screen.

Is Apple CarPlay available for the Toyota Highlander?

The 2022 Highlander’s basic compatibility with Apple CarPlay is one of its most appealing features. With a compatible iPhone and Toyota’s multimedia system, making calls, getting directions, and listening to music is now as simple as ever.

Why won’t my iPhone pair with the Bluetooth in my car?

Make sure Bluetooth is turned on before attempting to connect your device in Bluetooth settings. If your iPhone still has trouble connecting to Bluetooth, you can try updating your iOS software, clearing your network settings, or completely restarting your phone.

Why will my phone not connect to my car?

  • Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
  • For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
  • Try renaming your device if you have many phones connected to your car stereo: Enter a new name by going to Settings > General > About > Name. Then attempt reestablishing contact.

Why won’t my Bluetooth pair?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.