If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
In This Article...
Can the trunk be opened without a key fob?
Fortunately, as long as that isn’t locked, too, you can open your automobile trunk without a key by utilizing the trunk release lever or button inside the cabin.
Can a Toyota Corolla trunk be opened without a key?
Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
Without a key, how can you unlock a truck from the outside?
The usage of fancy key fobs, touchpads, and remote-unlock sensors in some more recent vehicles virtually ensures that you won’t get locked out. But what about the millions of poor souls who still manually lock and unlock their vehicles? Will they always be bothered by automobile windows that are shattered and prybars?
It is entirely possible to get your keys out of a locked car with a little patience, experience, and even more patience, and you probably won’t need to go to an auto body shop nearby to have your window fixed afterward. Here are some pointers for entering your locked automobile safely. (Bad people shouldn’t read any farther.)
How do you open the trunk of a car from the outside?
Modern cars also have a boot that may be accessed by merely unlocking the central locking system. This unlocks all of the doors, including the boot hatch. You may raise the boot by simply pushing the lever that is outside of the boot.
To unlock all other doors if you are inside the vehicle, unlock it from the driver’s side. Simply use the key-less entry fob to open the car if you need to access the boot while standing outside the vehicle.
A trunk lock can you pick?
I’m sorry you locked your keys in the trunk, but there isn’t a reliable way to open a car trunk lock without causing harm to the automobile. To reach the trunk, you should either call a locksmith or open a different door.
You can pry the lock open with a screwdriver if you don’t mind causing damage or replacing the lock. You may also use a slim jim, which you can get from most auto parts stores.
With a slim jim, access the trunk as follows:
- Swipe the slim jim’s hook end between the trim at the handle and the passenger-side glass.
- Find the lock rod that joins the handle to the locking mechanism by feeling around.
- Pull up while securing the thin jim to the rod. The door ought to be unlocked after you hear a click.
- Alternately, you can fold down the back seats and use the emergency release lever to open the trunk by unlocking the other doors and opening it normally.
Remember that not all vehicles can be repaired with slim jims, and even if they can, you risk damaging the vehicle. The best way to open the trunk is typically to hire a locksmith, and if your automobile insurance includes towing and labor coverage, the visit might even be paid for.
Finally, utilize Jerry, a free insurance comparison app that shops for low costs with more than 50 different insurance companies, to discover an insurance policy that includes towing and labor coverage or just to make sure you’re not overpaying for coverage. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
How do you use a screwdriver to open a trunk?
The screwdriver must be wedged into the lock and moved left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline.
Is there a button to open the trunk?
Pushing the Trunk Release button from inside the car will open the trunk lid. To the left of the steering wheel on the instrument panel, there is a button.
Is there a trunk release inside?
With effect from September 1, 2001, this document creates the new Federal Motor Vehicle Safety Standard (FMVSS) No. 401, Internal Trunk Release, which mandates that all brand-new passenger cars with trunks be fitted with a release latch inside the trunk compartment. This document also authorizes the installation of an alternate system, such as a passive trunk release system, which would automatically unlock the trunk lid in the event that a person entered the trunk. Eleven kids perished in the summer of 1998 after unintentionally being trapped in a car’s trunk. This new standard will provide kids and other people a chance to escape a passenger car trunk alive if they become trapped inside.