We’ve all accidentally locked our keys inside of our vehicles, and thanks to the automated locking mechanism, they will stay there until you use a spare set of keys to unlock the vehicle or hire a locksmith. Fortunately, there is a quick and simple method for opening the Toyota Camry’s trunk from the outside if you accidentally locked your keys inside.
You’ll need a long screwdriver for this technique, but since it’s very possible that your basic tools are locked in the trunk, either ask another driver to lend you one for a short while, or try your luck with a piece of straight wood or a branch.
Find a rubber plug the size of a huge bottlecap under the driver’s door. Next to the driver’s seat, exactly below the trunk latch, is where you’ll find it. Use the instrument you have at your disposal to press upward through the hole after removing the plug. It will push on the trunk lock and force the carpets up, opening the trunk so you can get your keys out. Don’t forget to re-plug the device when you’re finished!
In This Article...
Can a Camry trunk be opened without a key?
You can attempt the following two methods to open your Toyota Camry’s trunk without a key: Use the button adjacent to the driver’s seat to open the trunk. Fold the backseat to access the emergency release.
Without a key, how do you open a trunk from the inside?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Between the window and the window trim, press the pick down.
- With the pick, search the area for a rod.
- The automobile door should then open after using the pick to raise the rod.
- Now look inside your car for the lever or button that releases the trunk.
- To unlock the trunk, push or pull the lock.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
Without a key, how do you open the trunk of a 2018 Toyota Camry?
If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
Where is the release for the trunk?
Pushing the Trunk Release button from inside the car will open the trunk lid. To the left of the steering wheel on the instrument panel, there is a button. NOTE: For the button to function, the transmission must be in PARK.
What should I do if my car’s trunk locks my keys inside?
Request a locksmith The Pop-a-Lock team can quickly unlock the lock for you whether you’ve locked your keys in the trunk or the car’s cabin. Being in a scenario where you need your car keys but they are not available might be unpleasant.
How do the back seats of a Toyota Camry fold down?
Even though moving can be a very exciting event, it can also be stressful, especially if you find yourself short on space. Follow these easy steps to fold down the backseat on a Toyota Camry:
- Locate the release knobs beneath your rear window after opening your trunk.
- To maximize space, pull the knobs, then move the seats downward and forward.
- Simply lift them back into position until they lock to set them back up.
You should have a lot more room for boxes now that you’ve successfully folded down your backseats! Once you’ve moved in, you’ll need to update your auto insurance with your new location and confirm that your coverage satisfies the minimal standards imposed by your state.
Why not spend a little more time making sure you aren’t paying too much for your auto insurance while you’re at it? In less than a minute, the Jerry app will produce comparative quotations from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. In essence, you have full coverage and discounts without any hassles.
Without a key, how do you open the trunk of a Toyota Corolla?
Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
How do you use a screwdriver to open a trunk?
The screwdriver must be wedged into the lock and moved left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline.
With a dead battery, how do you open the trunk of a Toyota Camry?
Pull the lock tab up and use the outside door handle to unlock the door. Your car features a release mechanism on the right corner of the trunk that allows the trunk to be opened from the inside as a safety precaution.
Why won’t the button on my trunk unlock it?
When you press the inside trunk release button on the fob or the trunk lock actuator and nothing happens, this is another common clue that there is a problem. This could be a sign of a problem with the vehicle’s battery or with the electronics connecting to the actuator, such as a shorted fuse or wire. Since there are numerous potential issues that could result in this problem, it is recommended to get in touch with a nearby mechanic so they can accurately diagnose and resolve the problem as soon as possible.