No one is flawless, on that much we can all agree. Even though it might take a lot, your 2020 Toyota Highlander’s battery can nonetheless become discharged. A detailed instruction manual on how to jump start a 2020 Toyota Highlander has been produced.
Make sure you have a set of jumper wires and your key fob in your pocket before attempting to jumpstart your Highlander Hybrid.
Connect the positive jumper cable clamp to your car in the dedicated jump-starting connector. The second vehicle should then be connected to the other positive end. The negative on your vehicle’s end should be connected to a stationary, unpainted metallic point far from any moving parts, and the negative to the second vehicle.
Start the second vehicle’s engine after everything is connected, then raise the speed a little. For five minutes, keep the engine running at this pace to recharge your car.
It’s time to put your Toyota Highlander through its paces once the second car has been operating for five minutes. Before you do anything, double-check that all of your doors are closed. Once everything is in place, drive the second car at a constant speed while turning on the power. See if the “READY” indication illuminates.
Once your hybrid system has started, disconnect your jumper cables in the opposite sequence.
Make sure to get your Highlander Hybrid checked out if something still feels weird.
In This Article...
How can a 2006 Toyota Highlander be jumpstarted?
What happens when you need to jump start anything that also has a hybrid drive system? Jump starting a standard car can be difficult enough. Don’t panic; we’ve compiled a simple list of instructions to help you jump start a Toyota hybrid car, such the 2018 Toyota Camry. For a brief set of instructions, look below.
How do you Jump Start a hybrid vehicle made by Toyota?
Before beginning, you should first confirm that both cars are securely parked and switched off.
- Step 1: Open the hood and look under the fuse box cover for the Jump Start Terminal.
- The red positive jumper cable should be connected to the positive terminal in step two.
- Step 3: Join the other red positive jumper cable to the car receiving the jump’s positive battery terminal.
- Step 4: Attach the black negative cable clamp to the vehicle providing the jump’s negative battery connection.
- Step 5: Attach the second negative clamp to an obstruction-free, immovable, unpainted, solid metallic point.
From this point, all you have to do is start the jump-giving vehicle’s engine and let it run for around five minutes. The Toyota hybrid can then be turned on, and you can watch for the “Ready” indication to illuminate. The jumper cables can then be unplugged in the opposite direction from how they were attached.
Video Steps for Jump Starting a Hybrid Toyota
Those who learn best visually? Check out this Toyota video that shows you how to jump start a hybrid vehicle. In this video, we’ll be taking a look at the hybrid RAV4. As you can see, the 12-volt battery is actually found at the back of the car, but thanks to the unique jump start terminal under the hood, jump starting is still a similar process.
Can you leapfrog a Toyota Highlander hybrid?
To jump start your Toyota Highlander Hybrid, follow these steps: Open the hood and fuse box cover first, then attach the positive jumper clamp to the jump starting terminal on your automobile. Next, connect the other positive end to the positive battery terminal on the second vehicle.
Can you jump a Toyota hybrid?
Jump-starting a Prius or another Toyota hybrid is quite similar to jump-starting a gas-powered car. Jumper cables, a helping vehicle, and a solid metallic point are all required to jump a Prius.
Where is the Highlander Hybrid’s 12 volt battery located?
Yes, the hybrid’s illusive 12 volt battery has baffled many people. You’ll actually need to check your car’s trunk if you need to replace the 12v battery in a Toyota Highlander Hybrid.
How to find the battery
- Unlock the trunk.
- The side panel with the two tabs should be found.
- In front of the side panel, fold the interior of the trunk back.
- Utilizing the tabs, remove the side panel. The 12 volt battery is there.
Make sure the new battery you choose is the right model for your hybrid.
When you’re prepared to swap out the battery for a new one, take the following actions:
- Using a ratchet, remove the brace holding the battery to the car.
- Remove the negative terminal (the one nearest to the bumper) with your ratchet, making sure it doesn’t make contact with any metal surfaces within the vehicle.
- Take the positive terminal out.
- Remove the electronic connector and hose from the battery.
- Replace the old battery by sliding the old one out.
- Reconnect the positive terminal first, then the positive and negative terminals, and finally the bracket.
The fuse box under the hood is where you jumpstart your car if you ever need to.
Remember that your auto insurance doesn’t provide coverage for a dead battery. Jerry the Super App will still be able to save you a ton of money despite this. Users save an average of $887 a year using Jerry’s policy comparison service, which helps you locate the greatest insurance coverage at the most affordable rates.
With a dead battery, how do you start a hybrid vehicle?
- Avoid overusing your hybrid vehicle’s jumper cables on other vehicles as this can harm the electrical system.
- Turn off your headlights and inside lights, then engage your parking brake.
- Disconnect the hybrid system and take your key off.
- Fuse block cover, hood, and special jump-starting terminal cover should all be opened.
- The exclusive jump-starting terminal should receive the positive clamp (red) jumper cable.
- Connect the vehicle’s discharged battery’s negative clamp (black) to a stable, solid, unpainted metallic point.
- Make sure all unneeded lights are turned off and that the vehicles are not touching if the booster battery is put in another vehicle.
- When boosting a car, always utilize a battery that is the same or better in quality.
- Allow the jumper cables to be attached and the discharged battery to rest for five minutes. Then, with the gas pedal barely depressed, run the engine of the car that is boosting at roughly 2,000 RPM.
- Make sure the “ready light is on” before starting the hybrid system.
- After the negative cable, disconnect the positive cable.
Can a hybrid vehicle be jump-started?
The jump-start terminal of a 2010 Toyota Prius is visible in this picture. If you’re facing the front of the Prius, the terminal is on the right side of the vehicle and has a black cover that closes over it. Author: Allison Loudermilk
While dealing with a dead battery in a hybrid automobile is more difficult than dealing with one in a standard gasoline vehicle, the situation is probably not as severe as you might think. Why? The truth is that not all hybrid systems are made equal.
- Since the hybrid auto industry’s powertrains are not standardized, there is a lot of difference across brands and even within the same brand for model year redesigns.
- Many hybrid vehicles feature many batteries, some of which may not be in the typical places.
- If the battery dies, certain hybrid vehicles do require a trip to the dealer.
- Some modern hybrid vehicles have self-starting capabilities.
Any car you attempt to jump start is risky if you don’t know what you’re doing. Hybrids increase the procedure’s level of anxiety. Hybrid cars can typically be jump-started just like a regular automobile with a standard gas engine. It is true that not all conventional gasoline vehicles have the same powertrains, but learning how to jump-start a gas vehicle is simple because of this. However, the unique design of many hybrids’ powertrains can initially be perplexing.
The majority of hybrid models have two different batteries: a larger 12-volt battery used primarily for starting the car, which can be found under the hood but is frequently found in the trunk. This battery is smaller than the main high-voltage battery in the powertrain and is used when the car isn’t using its gasoline engine or runs in tandem with the gas engine for greater efficiency. Some people may feel it’s dangerous or difficult to jump-start a hybrid because of the existence of its high-voltage battery pack, but those batteries should be simple to distinguish from the smaller, more common 12-volt battery used to start the automobile (and thus, jump-starting). To avoid electric shocks from unintended contact, a hybrid battery pack should be enclosed and labeled with warnings. Make sure the battery you’re using is the right one with additional caution, and everything should go well.
Both of those batteries have the potential to run out of power, so if you’re experiencing battery issues, you’ll need to identify which battery is to blame. You’ll need a mechanic to look at the primary hybrid battery if your car won’t start and jump-starting doesn’t help.
The jump-start terminal found under the hood of many Toyota hybrid vehicles, including the Prius, should be used in place of the 12-volt battery. The procedures for jump-starting the hybrid are essentially the same as for jump-starting any other vehicle after you have found this terminal. (If you have a Toyota hybrid and are now stranded on the side of the road, this video about jumping a Toyota hybrid may be very helpful.)
Verify that you aren’t actually out of gas before presuming you need a jump start. According to Popular Mechanics, some hybrid vehicles, including the defunct Chevrolet Silverado and Nissan Altima models, shut off when the petrol tank is empty even when the battery is completely charged. Others, like those made by Toyota and Lexus, can only operate for a limited time (a few miles, tops), provided the primary battery is fully charged.
By the way, the smaller 12-volt battery is what you’ll need to utilize if you need to jumpstart another vehicle using a hybrid vehicle. The battery of a hybrid vehicle is typically found in the trunk as opposed to under the hood, and the terminals should be marked with plus (+) and negative (-) posts like the battery of a conventional vehicle. An example of this is the Toyota Prius. Check your owner’s manual if you can’t locate the battery in the trunk or if there aren’t any indicated terminals for jump-starting.
We’ve been cautious to say that “most” conventional cars have a 12-volt battery that serves as the starting mechanism up to this point. That’s because, according to Automobile & Driver, up until 2017, every modern car had a battery like that. The first contemporary mass-produced vehicle to defy the trend was the Hyundai Ioniq, which was then followed by the mechanically similar Kia Niro. Hyundai chose to use a lithium-ion battery in place of the 12-volt battery, and it is situated next to the primary hybrid battery. A switch inside the vehicle marked “12V Batt Reset” draws enough electricity from the main hybrid battery to jump start the starter battery in the event that the starter battery dies. In other words, while the Ioniq and Niro can jump-start themselves, they cannot be used to jump-start another vehicle or be classically jump-started. In addition to being more practical, the lithium-ion starter battery is 26 pounds (nearly 12 kilograms) lighter than a typical 12-volt starter battery, which improves the efficiency of these cars.
Your best bet if you drive a hybrid vehicle is to become familiar with the jump-starting options and techniques for your particular model before you need them. The owner’s manual for your vehicle is a reliable resource for this kind of knowledge. You can get in touch with the customer support team at the manufacturer or the service division at your dealership. Call a roadside assistance service if you are in an emergency situation and are unsure of what to do (AAA is 1-800-HELP). That will protect you from harm and assist prevent irreparable harm to the intricate powertrain of your hybrid vehicle.
The majority of new or certified used automobiles come with a roadside assistance contract, so keep that in mind if you find yourself in need of a jump but are unsure how to proceed. If you purchased an extended warranty for your car, you might also be protected. Last but not least, you can also add roadside assistance to your auto insurance.
How is a Toyota hybrid jump-started?
Jumping a Toyota Hybrid Battery: A How-To Guide
- Fuse Box Under the Hood, Open.
- Activate the Red Terminal Cover.
- Connect the Toyota Terminal to the Red Jumper Cable.
- Red/Black Jumper Cables should be connected to the second vehicle.
- Your Toyota hybrid should have the black jumper cable connected to an unpainted metal surface.
How much does a Toyota Highlander battery cost?
Between $644 and $651 is the typical price range for a Toyota Highlander battery replacement. While parts are priced at $617, labor expenses are predicted to range between $27 and $34. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account. There might be more repairs required.