You can either purchase a set of these press-on alloy ABS thermoform plastic overlays or plasti-dip your stock emblems. If you decide to use plasti-dip, you will need to use newspaper to mask off the area surrounding your emblems and then apply many coats of plasti-dip until you are happy with the results.
Many people will disagree with me on this, but I don’t want to stand about and risk damaging something by peeling the plasti-dip off. It’s just me, though. Choose your own course of action.
You run a higher danger of harming your emblems, stretching out a symbol, or scratching your paint if you have to remove every single insignia.
You can be sure to obtain the same OEM look and fit because the majority of these kits are laser cut and CNC trimmed in CAD programs. Additionally, 3M double-sided tape was used in the creation of these insignia, ensuring their durability.
In the industrial process known as thermoforming, a plastic sheet is heated to a temperature that makes it flexible, shaped into a precise shape in a mold, and then cut to produce a functional product. That said, there is always room for improvement in every product now available.
- Do they operate? Yes
- Do they possess OEM-level quality? No
- Would I repurchase them? Whole Day
- Are they gorgeous? Yes, they do look quite lovely.
In This Article...
Step #1Cleaning Surface
This entire procedure is as simple as it gets. Start by washing the surface with a little water and soap. This bottle contains 30% soap and 70% water.
Even if you actually don’t need to clean it with anything, it’s better to be safe than sorry.
Step #2Wiping Down Dust & Debris
Spray your emblems, then wipe everything down. I also used a q-tip to clean the emblem’s edges and gaps in between. Given my type A nature, I probably went a little too far.
My word is neat and immaculate throughout. Children eventually arrived, and I began to unwind.
Step #3Peel Back Sticky Adhesive
Apply the 3M double sided tape emblems once everything is ready. Each of the symbols has a small corner that you may peel off. It is fairly simple.
Step #4Press on Emblems
Make sure to press on the center and edges of every insignia when applying pressure. The large, blacked-out Toyota insignia on the front and back are a particular example of this. I had the impression that there was a lot of empty space before I applied pressure to every surface of the insignia.
Step #5The “N Vs. The “U
The U vs. N is the only other thing worth mentioning. Please bear in mind that they appear to be an exact duplicate. Never attempt to force the letter N or the letter U onto each other. You’ll experience awful things!
Toyota blackout emblem overlay: what is it?
Blackout emblem overlays are designed to exactly fit over existing badges and are molded from strong and durable ABS plastic, making customization simple and quick. To fit over already-existing chrome badging. Simple to install; just peel back the tape line and stick over clean badges.
How much does it cost to have car emblems turned black?
Wonderful question! Your nephew can definitely get away with paying less than $1,000 if all he wants to do is blackout his wheels. However, he may have to pay more than $3,000 if he wants the wheels, as well as all the trim and badges, to be completely blacked out.
The best thing for him to do is to compare options before making judgments.
It sounds like hell have some time to find a good offer because he’ll need to save money to make this happen.
Introduce your nephew to the vehicle insurance broker and comparison app Jerry to help him save money for his new job even more quickly. Customers of Jerry save $887 annually on their auto insurance premiums!
Window Tint
Many people prefer to darken out their windows as one of their initial actions. It is affordable and can be done in a nearby neighborhood store. You can also do it yourself if you have the necessary craftiness. The use of tint has many advantages, like dressing up your vehicle, providing sun protection, lowering the inside of your truck, and preventing people from seeing who is driving the greatest 4Runner in town. Make sure you abide by all regional and national regulations governing the level of tint. You don’t want to have to delete your investment due to tickets!
Smoked Headlights, Taillights, and Third Brake Light
The 2017 4Runner’s headlights and taillights from Toyota are sleek and somewhat squinty, which go well with the SUV’s overall design, but some people might find the abundance of chrome to be too much. Fortunately, it’s simple to modify that. Lights that are “smoked” are typically referred to as blacking out your lights. You can complement your sense of flair by smoking your lights.
You may quickly replace your factory lights with aftermarket ones that are pre-smoked thanks to interchangeable components! A full set of taillights costs between $300 and $600, and a pair of headlights costs between $600 and $1000. While some of them do in fact have tinted or smoked lenses, it’s common to locate aftermarket kits with clear lenses and blacked-out housings because many of these use contemporary LED technology, which doesn’t require reflecting surfaces. This will produce the same result, but it will also make the LEDs’ typically outstanding design visible even when they are off.
You can choose a significantly less expensive strategy, but keep in mind that it might appear less expensive, not last as long, and could cost you a lot in tickets if you do it incorrectly (I’ll get to that in a second). For about $60, you can buy vinyl film that you can simply glue over the plastic, and for about $20, you can buy spray coatings.
You may either use a huge sheet of film or vinyl and mould it to your lights yourself, cutting as needed, or you can buy them pre-cut to fit.
While I usually advise folks to take a chance and try something new, I would advise a total replacement of pre-tinted/smoked lights. Time is a major factor. The length of the vehicle will be covered with a good set of smoked lights. Age will cause film and spray coatings to shrink and become fragile. Incandescent lighting and UV radiation will hasten the issue. It’s not the simplest or most enjoyable thing to get off when it becomes so dry.
Recall the ticket I mentioned earlier? The purpose of headlights and taillights is to make you and other drivers more aware of your surroundings. It is strictly regulated by the US Department of Transportation (or its equivalent in your nation), which takes this extremely seriously. Police in the area will enforce that. If you tint something yourself, you run the danger of going overboard and incurring costs. The majority of kits are (DOT) approved and safe to use when you take them out of the box. Of course, make sure before making a purchase.
Front and Rear “Toyota Emblems
Thankfully, Toyota was considerate enough to remove the fender mounted logos, but the front and back ones are still present. But if you don’t like to see a huge chrome “T, you can alter that in several ways. You can cover the insignia with a blacked-out version using overlay kits, such as this 4Runner emblem overlay kit from Amazon. Breaking out a can of Plasti Dip or paint is a common alternative.
When you have “Your best bet will be to attack the TOYOTA across the front with a can of Plasti Dip or spray paint, or to swap out the letters for black ones.
Tailgate 4RUNNER
The elevated 4RUNNER insignia on the back stands out well, which may not be to everyone’s taste. Thankfully, you can take care of the numbers and letters in the same way that you took care of the Toyota emblems: by spraying, covering, or replacing them. Fortunately for you, with a little heat, they will easily come off, allowing you to swap them out for the letters we sell here. It is extremely quick and spotless. Here is where you can purchase them for $21.99 each.
Wheels
The cost of the situation can increase at this point. When someone looks at your SUV, it is one of the first things they notice. They are distinct! Let’s discuss several choices before deciding whether it is worthwhile to invest.
“Dipping” or “wrapping” are a couple of the less expensive methods. When you “dip your wheels,” you mean to spray them with Plasti Dip or another similar product. Many images and videos of people applying matte black Plasti Dip to wheels can be seen online. You’ll require more than one can, but you’ll also need others in case the first one starts to peel and crack over time. To reapply is simple!
“Wrapping” refers to vinyl-wrapping the wheels. Even though it typically looks nicer than dipping, it’s more difficult to restore if you have curb rash or other dings. For some models, overlays are also available. They essentially function as form-fitting “hubcaps” that you can snap over your current wheels to transform them into black wheels!
New wheels are your most expensive alternative, but they will also be your most durable and attractive option. This has a high price tag. For instance, a set of 4Runner TRD Pro wheels may be purchased from Amazon for $1200. They are great choices if you have the money. Used wheels are a fantastic alternative and may often be much less expensive, but make sure you carefully inspect them.
Bumpers
For the 2022 range, some trim models receive some more front-facing chrome. Actually, the main portion of the bumper, the bezels around the fog lights, and some more trim are all made of chrome. Your best option right now will probably be Plasti Dip, or something similar. The trim is identical in the Nightshade edition, but it is black. You may possibly order the trim in black and use it to replace the chrome components. I am unable to check that fitting, therefore proceed with caution when ordering.
What does the Toyota logo mean?
For the company’s 50th anniversary in 1989, the modern Toyota mark made its debut. It took around five years to create the current design since a proper mark had to be created to reflect Toyota’s growing international prominence. The logo was created with two goals in mind: to be instantly recognizable from a distance as announcing the “coming of Toyota,” and to stand out visibly from other car brands.
The new logo is composed of three ovals that are arranged in a horizontally symmetrical pattern. The two parallel ovals inside the larger oval stand for the company’s and the customer’s hearts, respectively. They are positioned so that they overlap to signify a partnership and mutual trust.
Two parallel ovals that overlap inside the larger oval stand in for the letter “T” for Toyota, and a steering wheel represents the actual vehicle. The outer oval represents Toyota’s surrounding environment. Similar to Japanese brush art, each oval has a varied stroke thickness to define its form.
The empty space in the logo’s backdrop represents all of the principles that Toyota wants to instill in its customers: excellent quality, value that goes above and beyond expectations, driving pleasure, innovation, and honesty when it comes to safety, the environment, and social responsibility.
Power of the Brand
On the high-end Celsior car in October 1989, the brand-new Toyota insignia made its debut. Soon after, the new emblem was proudly displayed on other vehicles. It was an avant-garde logo for its time, easily recognizable from both a front and rear view, and it immediately gained recognition as the Toyota logo.