The majority of collision-related losses are often covered by car insurance, but you can still be responsible for some repairs. Cosmetic damage, like as scratches or scrapes in the paint job, could not be covered by your insurance. Your automobile will suffer a little less damage with a bumper protection, saving you from having to spend more money on repairs.
In This Article...
Bumper Bully can you drive with it on?
Never operate a vehicle or drive one while the Bumper Bully is mounted. It is risky to do so and could result in product or vehicle damage. Before starting the car, always put the item back in the trunk. Before usage, please read the product disclaimer and all instructions.
The bumper bully is intended for parking outside. Additionally, it is applicable to indoor and valet parking garages.
Only the bumper finish may be protected by the Bumper Bully. Your bumper might not be protected from hits going faster than 1MPH. The product reduces the possibility of scratches and their effects from gentle parking manoeuvres. The Bumper Bully is not a structural part and will not improve a car’s ability to withstand crashes or the safety of its passengers in backseat collisions.
(4) Does the bumper protector (bumper bully) fit my car? Exist any exclusions?
The item will suit the majority of automobiles. Vehicles with rear engines are an exception. Straps should never be used in an engine compartment because they could get caught in moving parts and cause damage or even injury.
The rear of the product should constantly be cleansed and washed while cleaning BumperBully. Keep the BumperBully and the back bumper both free of dirt and debris by routinely cleaning their surfaces. It’s fine to use mild soap and water. A wet towel or an exceptionally gentle carwash brush are other options.
When not in use, place the Bumper Bully flat in your trunk to maintain its best appearance. Avoid storing rubber folded because it could wrinkle.
Some carpet kinds may not be compatible with the Velcro on the strap ends. If this occurs, utilize the additional two Velcro tabs that are provided. The strap ends can then be attached to the extra Velcro stickers by adhering them to a clean, smooth, hard metal or plastic surface underneath the carpet in the trunk or another accessible location. The carpeting of the trunk should never be directly fastened with additional Velcro stickers. Only a clean, smooth, firm metal or plastic surface is acceptable for optional Velcro sticker attachment.
The operation of Bumper Bully.
The back of the Bumper Bully trunk straps are covered in 2×4 soft foam rubber padding. The straps are raised off the bumper and given a cushioned surface thanks to the pads. The soft touch strap pads raise the straps, adding another layer of protection for the bumper of your car.
The value of bumper corner protectors
They should never be used. They might prevent small dings and scratches on the bumper. However, in the event of a significant collision, it circumvents the cusioning protection the bumper offers, leaving the occupants to take the brunt of the shock. Additionally, they kill pedestrians who could have just had minor injuries.
How can you prevent a rear bumper from getting scratched?
A bumper protector film, which is often clear, is another option. This is placed over the bumper’s surface to guard against minor dings and dings, including scratches from pet claws.
The transparent layer, which is removable, lets the original paint color to shine through. The majority of kits have self-adhesive backing, are easy to apply, and may be customized to fit your bumper if necessary.
Which rear bumper guard is the best?
When you parallel park, the BumperSafe – Front/Rear Bumper Protector/Bumper Guard prevents damage to your bumpers. One of the best features of this product is that it can be adjusted to accommodate most small and large vehicles, including SUVs, and is 30 inches long. It includes a rubberized metal hook so the finish of your car won’t be scratched. All forms of weather, including rain and snow, can be used with the bumper guard. If your automobile is smaller, you can cut the bumper protection by adhering to the laser-etched lines. The product is 72 inches wide, which offers adequate covering, and includes Velcro for a tight fit. Users say it covers the bumper and the back corners, is simple to install, and the hook stays in place.
However, the straps are simple to cut, making it easy for thieves to steal the bumper protection. If you intend to take your automobile through a car wash, you must also take it off.
What is a bumper cover for the back?
The function of the front and rear bumper covers is the same. They are not, however, interchangeable. A front bumper cover cannot be installed on a rear bumper and vice versa. It’s because the design of a front bumper cover and a rear bumper cover differ. For illustration:
- Typically, rear bumper coverings are shorter than front bumper covers.
- Parking sensors are integrated into some bumper coverings.
- The purpose of rear bumper covers is to improve the functionality of the lift gate or trunk lid.
- The front bumper covers are made to match the headlamps’ form. Rear bumper coverings are made to fit the contours of the trunk and/or rear lights.
How can bumper protective film be removed?
Make sure to inspect the film protecting the car bodywork before moving further with the removal. If the film only has a few dubious spots, you can polish it to make it look better. You may even enlist the aid of qualified vehicle specialists to assist you in repairing the movie. By doing this, you can save spending time and money installing a new film.
If the film can’t be fixed, you will have to take it out completely. You must use the materials specified above at this time.
Steps
The methods required to remove the coating protecting the car’s paint are as follows:
- Be careful not to just pull the film off like a page from a book. Find the area where the protective film and car are most separated instead. The peeling procedure can begin there. If you are unable to locate the area that is most obviously pulled off, check the margins of the film to determine if there is already evidence of film separation. Parking your car outside will warm the surface and make removing the coating simpler.
- Use a plastic scraper or razor to attempt to scrape the film. If the film comes off easily, you shouldn’t use the blow dryer or heat gun. To remove the film more conveniently, however, if it comes off in pieces, you might need to use a heat gun or blow dryer.
- Hold a heat source, such as a blow dryer or heat gun, over the peeled-off region for a few seconds. To prevent burning the film, hold the gun or dryer between 8 and 12 inches away from it. Additionally, it’s crucial to use extra caution when using these heating instruments.
- Use the plastic scraper to remove the film from the heat after a few minutes. The sticker ought to readily peel off by this point. If not, keep carefully scraping until the coating is completely removed.
- After the sticker has been removed, use a little amount of specialized adhesive remover to clean up the adhesive residue. When necessary, reapply the solution after rubbing and wiping the leftovers in each location.
- Use a microfiber towel to dry the area after removing the adhesive residue. Apply wax to the surface for a lustrous finish, and you’re good to go!
Let professionals handle car film removal
You can remove the automobile protection film on your own using the aforementioned techniques. If you were able to effectively remove the previous protective layer, congratulate yourself. Additionally, you have saved money by not having it done at any local auto shops or car window tinting businesses.
However, if you’re unsure of your ability to remove the film, you may always contact Springfield VA’s expert installers of paint protection film. If you need assistance with film removal from an automobile, get in touch with one right away.