The majority of the fender flares we sell are simple to install without cutting or drilling. Although the installation process varies slightly from product to product, all of them use either double-sided adhesive or bolts that are properly sized for factory holes along the wheel arches.
In This Article...
Do fender flares need drilling holes in the vehicle?
Fender flares are one of the fastest methods to give your truck a distinctive look. These add-ons dangle over the wheel wells of your truck, creating a wide vehicle profile and covering oversized wheels and tires. You may modify your truck with a set of fender flares by using simple hand tools. We demonstrate how to install a set of TrueEdge Painted Fender Flares on a 2011 Ford F-150 in this how-to manual.
A few 1/4-inch holes must be drilled in the front plastic bumper and the vehicle’s sheet metal for this installation, but many other installs on today’s models of cars can be completed without any drilling at all.
Ratchet and socket set, first
2. Standard and short Phillips screwdrivers
3. 1/4-Inch Electric Drill Bit
4. Gloves and protective eyewear
As you go, take off the red adhesive tape from the trim and place it over the flare’s edge.
Make sure the washer’s smooth edge touches the paint. To hold the bolt in place, tighten the nyloc nut using the provided Allen tool.
These three screws are situated close to the fender well’s edge. These F-150 2011 screws measure 7/32 inches in length.
Two of the removed screws should line up with the bracket. The top two 7/32nd screws should be replaced, and a U-Clip should be attached to secure the bracket.
Mark the bottom fender flare hole where it lines up with the plastic bumper for drilling a 1/4-inch hole while the flare is in place.
Establish the location of the frame’s hole in relation to the fender flare and mark the flare for the 1/4-inch hole.
Reinstall the bottom 7/32-inch screws after installing the provided hardware at the newly drilled areas.
To further secure the fender flare in place, insert plastic fasteners where they are specified. On some applications, some fasteners might not be appropriate.
Where the holes in the fender flare are located on the inside of the fender, mark the sheet metal.
The threaded portion of a U-clip should be facing inside toward the car’s body while the hole orientation should be toward the tire. Install U-Clip bolts loosely.
Completely tighten all U-Clip bolts and the 10MM support beam bolts after installing U-clips.
Contact or chat with our product experts if you have any queries regarding fender flares or any other accessories.
What is the price of installing fender flares on a truck?
A set of professionally painted fender flares should cost between $300 and $400. Remember that there are many variations involved, so we strongly advise speaking with a few body shops and outlining your requirements before deciding on a painter.
If you want a painted set, it is best to choose smooth flares. Any texture your flares may have is eliminated by a skilled painter who sands the flares to an extremely clean finish.
How long does the fender flare installation process take?
Offender flares are a fantastic way to update the look of your vehicle. These tough parts will defend your exterior when you’re out rock-climbing, which is perhaps more practically speaking. Additionally, they permit the use of bigger wheels. However, you can’t pick any old pair. Take your time; after all, they aren’t exactly easy to find. But how can you install your choice once you’ve made your decision?
We’ll go over each of these steps in greater detail later on, but for now, let’s focus on persuading these people to actually make the purchase.
Installation Steps
The good news is that installation is fairly easy and should only take ten to fifteen minutes per fender. Simply follow these instructions, and you’ll be rocking in no time.
- Your current fender flares should be unbolted and taken off the car. Factory fender flares are typically secured by bolts positioned from the back, which are accessible by bending over the fender.
- To check that your new fender flare fits properly, place it up against the body of your car. The bottom edge should align with the bottom of the fender, and the front edge should line up with the bumper.
- You’ll need to drill holes into the body of your car if it didn’t come with flares. Utilize the template that is included in your package.
- On the underside of the fender flare, apply the double-sided foam tape. The second side of the tape shouldn’t be peeled off until you’re prepared to install. Apply after lining up the fender flare’s holes with the holes in the car’s body.
- Secure the flare with bolts. For every fender, repeat the procedure.
Choosing the Right Brand
Finding the ideal flares for you could be more difficult than you think with such a large choices to pick from. Visit our collection of factory-style fender flares if you want the “just-rolled-off-the-line look. Our off-road flares are what you should be looking at if you don’t mind a few dings.
Only the most reputable brands in the industry can be found on our online shelves at AutoAnything. Choose from fender flare brands like Bushwacker, Rugged Ridge, and EGR. Even better, each one will be created specifically for your vehicle. In order to ensure a proper fit and simple installation, whether you’re looking for new Dodge Ram fender flares or Jeep fender flares, you’ll discover just what you need.
Fender Flare Installation Wrap-Up
Check out the fender flare reviews on our website if you’re still unsure of what’s best for you at this time. Find out which truck flares are most highly recommended, or read reviews of the numerous Ford F-150 and Toyota Tundra fender flares that are offered here.
Even better, we ship more than 99% of all orders for no additional cost, and we back every order with our 1-Year, Lower Price Guarantee.
Fender flaresare they bolted on?
The majority of fender flare manufacturers around the world, fortunately for the nervous truck owner who likes the bolted appearance of these flares but would prefer to avoid performing the irreversible act of drilling holes through the body of their beloved automobile, do not anticipate that level of commitment.
Most fender flares don’t actually need to be installed with any drilling; they just have the appearance of being bolted. The flares will fit your truck perfectly without requiring any modifications if you simply enter the year, make, and model of your vehicle in the online order form.
How well do bolt/rivet style fender flares protect my truck from damage?
The fact that bolt/rivet style fender flares effectively shield your truck from the muck of mud and dirt you kick up every time you go off the pavement may be an even better reason to purchase them. Gravel and other types of hard, sharp debris can cause serious damage by scratching paint or leaving dents, making them even worse than dirt and muck.
Stock fender flares can only shield your truck from the filth it creates to a certain extent. A larger set of fender flares that will better protect your priceless vehicle is best if you frequently go off-roading.
In addition to safeguarding your truck from harm, it can shield you from any penalties imposed by Johnny Law. Yes, you read that correctly. In some circumstances and states, you are required by law to buy and install fender flares that are larger than stock. These ordinances were created in reaction to the damage that debris from other people’s trucks was causing to other people’s trucks and other property. You risk receiving a fine if you break this regulation.
You won’t have a problem with this if you have stock tires. However, if you have fitted your vehicle with oversized tires, you risk receiving a citation if you don’t also purchase matching monster-truck-sized fender flares. Your flares must extend beyond your tires. You can fulfill this requirement by adding some fender flares in the bolt/rivet design to act as a canopy over your large tires.
What are the different types of fit for floor mats?
They do, in fact. There are numerous names for these fender flares. They are also known as “pocket-style fender flares,” “bolt,” and “rivet.”
Why should I buy bolt/rivet fender flares over any other kind of fender flares?
because they have amazing looks. With this addition, your truck will be one step closer to being a Mad Max-style murder machine. These fender flares are obnoxious, aggressive, and perhaps even derogatory. These fender flares are unyielding and won’t accept “no” as an option.
How much do bolt/rivet style fender flares cost?
The answer to this query is dependent upon the brand of the fender flares as well as the make and model of your truck. The TrueEdge Pocket/Bolt Style Fender Flares start at $324 and increase in price from there. If you’re only searching for a replacement or don’t want to outfit your entire truck, several models are available in front-only or rear-only sets.
Fender flares: Are they a good idea?
Fender flares are a great addition to any truck overall. They will give any truck a more aggressive appearance and shield your truck from mud, rocks, and other road debris.
The best thing is that fender flares for any truck are readily available on the modern car accessories market. Additionally, installing this item is typically simple.
What screws do fender flares need?
Apply a U-Clip to the vehicle’s highest hole and one Flange Type-D screw through the inner piece as shown in the center. The contact points on the body of the car should be washed and dried. Where the rubber seal is going to be applied, clean the surface and inside edge of the fender flare.