How To Get Maintenance Light Off On Toyota

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

On a Toyota Camry, how do you reset the maintenance light?

Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.

Why does my Toyota state it needs maintenance?

  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • If the car is on, turn it off.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Now the light will read “MAINT REQD.”

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

Why, after an oil change, is my maintenance required light still on?

If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.

Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.

How can I disable the Toyota RAV4’s maintenance alert?

How to Extinguish the Toyota RAV4’s Maintenance Light

  • Put the ignition on with your key. Turn the key to the first position.
  • On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
  • Hold the odometer button down for another five or so seconds.
  • Release the odometer button after it is off.

How can you turn a Toyota Corolla’s maintenance light back on?

Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.

Even though my automobile says maintenance is necessary, can I still drive it?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.

Is the check engine light the same as the maintenance necessary light?

Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.

Is the maintenance needed light always on?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop.