How To Connect Your Phone To A Toyota Corolla

Toyota / By
  • Make sure your mobile device has Bluetooth turned on.
  • Select Bluetooth from the Setup menu on your Entune entertainment system by clicking Menu > Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your smartphone.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

Why won’t my Toyota Corolla and my phone connect?

The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

How can I pair my Toyota with my Bluetooth device?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Choose “Settings”
  • Activate Bluetooth.
  • Activate “Scan for devices.”
  • Input “SETUP”
  • Choose “Bluetooth”
  • Choose “Add New Device”
  • To make this system discoverable, click.

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

How do I link my 2011 Toyota Corolla’s Bluetooth?

  • Make sure your phone’s Bluetooth is turned on.
  • the Scan For Devices option
  • Push the Setup button on the screen in your car.
  • Select Bluetooth next.
  • the Add New Device button
  • Choose Make this System Findable.
  • When your phone sends you a pairing request, accept it.
  • The pairing of your device and vehicle will be verified by a confirmation.

Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.

Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How can I connect my phone to my car?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

How do I link my 2007 Toyota Corolla’s Bluetooth?

How to Install Bluetooth in a Toyota

  • Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your mobile device.

What is the Bluetooth setup process for a 2010 Toyota Corolla?

To link your phone to your Toyota, confirm if your Android is compatible with it. Choose the required devices by using the Scan For Devices option. Simply click the Setup button on your vehicle’s screen to configure your system. Your next item should be Bluetooth. Under Add New Devices, choose Make this System Discoverable from the drop-down menu. On your phone, tap the Accept button when you get a pairing request.

How do I connect my iPhone to my vehicle?

CarPlay, a smarter and safer way to use your iPhone in your car, is a feature that is available in some vehicles. When you use CarPlay, the functions of your iPhone that you want to use while driving are shown right on the dashboard of your vehicle.

To begin with, confirm that your country or area and your car both support CarPlay.

Connect your iPhone to the USB port on your car’s audio if it supports CarPlay utilizing the USB port. A smartphone symbol or a CarPlay icon may be used to identify the USB port.

Press and hold the voice command button on your steering wheel to set up CarPlay if your vehicle supports wireless CarPlay. Alternatively, check sure your car is in Bluetooth or wireless pairing mode. Next, select your vehicle on your iPhone by going to Settings > General > CarPlay > Available Cars. For more details, consult the owner’s manual that came with your vehicle.

Why won’t my Bluetooth connect to my car?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

Where can I find the phone jack for my 2012 Toyota Corolla?

By turning on your Toyota Entune system, you can access Apps. Click Setup on your Toyota’s touchscreen. By selecting the New Device link, Bluetooth can be included. connect with your mobile devices so you may share ideas.

Has the 2010 Toyota Corolla Bluetooth?

Bluetooth Car Interface Built-In To the factory-installed Toyota Corolla 2010 car radio, Hands Free Calling and Wireless Audio have been added. The device has a microphone and Bluetooth built in.

How can I restart my car’s Bluetooth?

The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.