It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
In This Article...
Android Directions
Using Android:
- Choose “Settings”
- Activate Bluetooth.
- Activate “Scan for devices.”
- Input “SETUP”
- Choose “Bluetooth”
- Choose “Add New Device”
- To make this system discoverable, click.
Select “Car Multimedia on your Android. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
How come my phone and Toyota won’t connect?
The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.
Has the 2012 Prius Bluetooth?
The Hippocratic oath contains the key to maintaining a market-leading product at the top of the sales charts: first, do no damage when considering redesigns or refreshes.
Toyota is wise enough to know better than to take a chance on a product like the Prius Hybrid, the undisputed market leader in the hybrid category. For the 2012 model year, there are alterations, but they are sufficiently modest to be missed by untrained eyes.
The 2012 Toyota Prius has a front end that has been somewhat restyled, new headlights, and LED daytime running lights. For 2012, the Prius receives revised taillights and new wheels on some variants.
Nearly all trim levels of the Prius, which still includes the Prius One (reserved for fleet customers), Prius Two, Prius Three, Prius Four, and Prius Five models, have more stuff inside.
Redesigned 15-inch wheel covers, a new infotainment system with a 6.1-inch touch screen, a USB connector, Bluetooth phone connectivity, and Bluetooth audio streaming are all included with the 2012 Prius Two variants.
The Toyota Entune telematics and infotainment system, a backup camera, Sirius XM satellite radio, HD Radio, and a modified Smart Key system that now unlocks all three doors are now included as standard features on Prius Three models.
If you choose the 2012 Prius Four, you’ll also get an eight-speaker JBL audio system that’s been engineered to use less power.
On the Prius Four, the Deluxe Solar Roof Package comes with a heads-up display and a seven-inch touch screen monitor with split-screen functionality.
In addition to the features listed in packages Two through Four above, the top-of-the-line Prius Five does not receive any additional features. However, buyers of the Prius Five can choose the Advanced Technology Package, which is not an option on cheaper models.
The updated navigation system with a larger screen, the heads-up display, Dynamic Radar Cruise Control, Pre-Collision System, and Lane Keep Assist are all included in the Advanced Technology Package.
Finally, Toyota offers the dealer installed Plus accessory package for customers who want a bit more “sport with their Prius. A seven-piece body kit, lighter 17-inch wheels with performance-oriented tires, lower springs, and a rear sway bar are all included in the package to lessen body roll during turns.
My 2009 Prius has Bluetooth, does it not?
I adore my Prius, and if you ask almost any other Prius owner, they will all agree. I was eager to start saving money and embarking on road trips as soon as I had my 2007 Toyota Prius touring edition on the road. However, there was a problem that I had no idea would drive me mad.
Before cellphones really began to take off in a significant way in 2007, automakers were still placing CD players in their audio systems, and some higher end versions allowed for the connection of an iPod through an auxiliary wire (or aux cable for you millenials). This required me to use CDs, which I didn’t want to do, or pull out my outdated 5th generation Ipod and hope it still worked (the battery was fried, by the way). I didn’t buy a Toyota Prius to waste time trying to decide which album would “transport me back,” I purchased it to have fun with.
Fortunately for me and all of you readers, there are some excellent and affordable alternatives for your Toyota Prius.
If you’re anything like me, you must enjoy getting into your car, launching Spotify, Pandora, or your preferred music player, and selecting a pre-selected playlist of songs or channels to listen to endlessly. The Toyota Prius had Bluetooth available on select trim packages from 2004 to 2009, although it could only be used for phone calls. This implies that you were essentially out of luck if you wanted to stream anything else. up to now.
My touring edition Prius has the dreaded aux port, but after some investigation, I found a really amazing interface module that is available on Amazon. It is quite easy to install, and you may somewhat upgrade your Prius while still maintaining its factory-fresh appearance and feel. Anyone with a little free time can install it, and it works fantastically. My device was first located inside the center console, near the aux port, but I later moved it higher on the dash where it was easier to use. I spent $26 and a couple of hours on a bespoke install, and now I can stream my favorite music for meditation while cruising at 45 to 50 mpg.
Has the 2005 Prius Bluetooth?
Bluetooth Car Interface Built-In The original Toyota Prius 2005 factory car audio now includes Hands Free Calling and Wireless Audio. The device has a microphone and Bluetooth built in.
How can I pair my phone with the Bluetooth on my Toyota?
How to Install Bluetooth in a Toyota
- Make sure your mobile device has Bluetooth turned on.
- Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
- Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
- The Toyota Entune system and your mobile device are now Bluetooth-enabled.
Why won’t my car’s Bluetooth connect?
Is your vehicle’s Bluetooth not functioning properly? Do you use Apple or Android devices? Before you start pulling out your hair, try these techniques! You might want to go over how to couple with your automobile first.
The most common customer complaints we receive have to do with syncing Android contacts. The user cannot access contacts while the phone is pairing itself. No names, no numbers, or numbers only. How come? There is an easy answer!
ISSUE: Bluetooth commands in the car cannot be used to access contacts on an Android phone. Perfect pairing, but you can’t access your contacts or phone numbers.
Solution: When you first pair the phone with Android, make sure all of the dialogue boxes are checked. Has your phone been paired before? No need for concern! Simply remove the car from your phone’s list of associated devices, remove the phone from your vehicle’s list of paired devices, and RE-PAIR your phone!
Once pairing is complete, many Android devices, unlike Apple goods, will ask for different accesses.
The car might request access to contacts, SMS, audio recording, and other features; select “Allow” and then select “Do Not Ask Me Again” to dismiss the prompts in the future.
Many Apple users express worries that their car cannot access their contacts, much like Android users do. Although the phone is connected, the car doesn’t seem to be able to access contacts. The answer is simple!
ISSUE: Apple iPhone/iPad pairs with the car’s Bluetooth system without a hitch, but contacts cannot be accessed.
FIX: Ensure that the contacts can sync on your smartphone. Select “Settings,” then “Bluetooth,” and then look for the car that’s having trouble pairing. As soon as you tap the I button next to the car, make sure “Sync Contacts” is ticked in every box.
Important: You must still complete the process after choosing to “Sync Contacts”! Completely shut off the engine before opening and closing the driver’s door. Restart the engine after that, and then choose your phone from the list of linked devices! You ought to be prepared!
Do you still have issues getting your phone and car to sync via Bluetooth? There is one tried-and-true thing you can do even if your bluetooth isn’t functioning. Remove, Remove, Replace!
In many cases, it is simpler to simply unpair Bluetooth and re-pair than it is to try to diagnose a problem while paired. Here is how to accomplish it:
1) On your phone, go to the Bluetooth settings and completely erase the vehicle you want to connect to.
2) Go to the vehicle’s Bluetooth settings and completely erase the phone you’re attempting to connect.
Recouple the two! Enter the vehicle’s “Bluetooth” menu and let it look for a device. Turn on Bluetooth on your phone and wait up to 30 seconds for the vehicle to show up on the list. then stick to the directions!
DID YOU FIND THESE ADVICES USEFUL? ARE YOU STILL HAVING PROBLEMS? COMMENT BELOW AND LET US KNOW!
Why won’t my Bluetooth pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
Why is my phone not working with my car?
- Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
- For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
- Try renaming your device if you have many phones connected to your car stereo: Enter a new name by going to Settings > General > About > Name. Then attempt reestablishing contact.