Drivers must develop ways to use mobile devices safely while operating a vehicle as staying connected at all times becomes the norm. With the help of tools like the Entune system, automakers have become more intelligent and improved their vehicles to meet drivers’ shifting technological needs. To make traveling with a smartphone in tow safer and more practical, our team at Hesser Toyota is offering advice on how to sync the iPhone with the Toyota Highlander Bluetooth.
In This Article...
Bluetooth pairing instructions for the iPhone
According to the Highlander Entune system:
- Hit the HOME key.
- Choose SETUP (found in the upper right corner of the display screen)
- Choose BLUETOOTH
- Select ADD
Using an iPhone:
- Choose SETTINGS.
- Click BLUETOOTH.
- Set the Bluetooth toggle to “ON.”
- Choose the Highlander system from the available devices.
- Put in the PIN that is displayed on the Highlander’s Entune system.
- Click PAIR/OK.
What does Bluetooth do?
Drivers can use Hands-Free Calling, Siri Eyes Free, and music streaming when they pair their devices with the Entune system’s Bluetooth. Without taking their eyes off the road or their hands off the steering wheel, drivers may use voice commands to make phone calls, stream music, or use their preferred iPhone features.
How do I link my Toyota Highlander’s Bluetooth?
It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
Android Directions
Using Android:
- Choose “Settings”
- Activate Bluetooth.
- Activate “Scan for devices.”
- Input “SETUP”
- Choose “Bluetooth”
- Choose “Add New Device”
- To make this system discoverable, click.
Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
How can I pair my iPhone with my Toyota’s Bluetooth?
How to Install Bluetooth in a Toyota
- Make sure your mobile device has Bluetooth turned on.
- Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
- Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
- The Toyota Entune system and your mobile device are now Bluetooth-enabled.
How come my phone and Toyota won’t connect?
The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.
Why won’t my iPhone pair with the Bluetooth in my car?
Make sure Bluetooth is turned on before attempting to connect your device in Bluetooth settings. If your iPhone still has trouble connecting to Bluetooth, you can try updating your iOS software, clearing your network settings, or completely restarting your phone.
Where can I find the iPhone connector for my Toyota Highlander 2021?
How to Bluetooth Connect an iPhone to a Toyota
- Make sure Bluetooth is turned on in your iPhone.
- Go to Apps after turning on your Toyota EntuneTM system.
- Your touchscreen’s Setup option should be clicked.
- Select Bluetooth, then click Add New Device.
- Click Add after locating your iPhone on the EntuneTM screen.
How can I connect my 2015 Toyota Highlander to my iPhone?
Choose SETUP (found in the upper right corner of the display screen) Choose BLUETOOTH. Using an iPhone:
- Choose SETTINGS.
- Click BLUETOOTH.
- The Bluetooth toggle should be set to ON.
- From the device list, choose Highlander system.
- On the Highlander’s Entune system, enter the PIN that is displayed.
- Click PAIR/OK.
Soft Reset
The Toyota Entune multimedia system can be quickly and easily reset using the following technique:
- Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
- Hold off till the multimedia screen turns on.
- For 12 seconds, firmly press and hold the PWR-VOL knob.
- Toyota Entune ought should restart and work normally.
Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:
- While the engine is off, turn on the electrical systems.
- Hold off till the Entune system turns on.
- Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
- Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.
Hard Reset
If the prior approach didn’t work, you must carry out the following actions:
- Do not start the engine; instead, press the Engine button twice.
- The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
- The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
- Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.
The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.
Software Reset
Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.
- Without starting the engine, start the vehicle.
- Remove Entune from any Bluetooth devices that are currently in use.
- Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
- Select the Setup menu on the display after the restart is finished.
- Choose General from the menu.
- Locate and click the Delete Personal Data button.
- Check that everything is working properly by starting the car.
How can I link my 2017 Highlander’s Bluetooth?
- Make sure your phone’s Bluetooth is turned on.
- the Scan For Devices option
- Push the Setup button on the screen in your car.
- Select Bluetooth next.
- the Add New Device button
- Choose Make this System Findable.
- When your phone sends you a pairing request, accept it.
- The pairing of your device and vehicle will be verified by a confirmation.
Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.
Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.
How can I pair my automobile with my Bluetooth-enabled phone?
from your phone, pair
- Verify that your car is paired and ready for discovery.
- Open the Settings app on your phone.
- Then select Connected devices. Tap “Bluetooth” if you see it.
- To pair a new device, tap. Name of your vehicle.