How To Connect Bluetooth In Toyota Yaris 2019

Toyota / By

The Toyota Yaris makes it simple to make hands-free calls and stream audio from compatible mobile devices. However, you must first connect your Bluetooth phone to the vehicle.

Note that this technique only applies to third-generation Yaris XP130 and XP150 models made between 2011 and 2019.

  • To display the audio menu, press the multi-knob, turn the knob to select Bluetooth, and then press the knob.
  • Configure your smartphone to begin looking for a fresh Bluetooth connection. Make sure you understand how to use the Bluetooth settings on your phone because every phone functions a little bit differently.
  • Next, press the knob after turning the multi-knob to Bluetooth Pairing.
  • You can register up to five devices, and the connection is complete once your phone’s name appears on the screen.

How can I connect my Toyota Yaris to Bluetooth?

  • Make sure your phone’s Bluetooth is turned on.
  • the Scan For Devices option
  • Push the Setup button on the screen in your car.
  • Select Bluetooth next.
  • the Add New Device button
  • Choose Make this System Findable.
  • When your phone sends you a pairing request, accept it.
  • The pairing of your device and vehicle will be verified by a confirmation.

Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.

Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.

How do I configure Bluetooth in my 2019 Toyota?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Choose “Settings”
  • Activate Bluetooth.
  • Activate “Scan for devices.”
  • Input “SETUP”
  • Choose “Bluetooth”
  • Choose “Add New Device”
  • To make this system discoverable, click.

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

Is Bluetooth available in the Toyota Yaris?

Your Toyota’s multimedia system has Bluetooth built in, allowing you to connect your phone and make hands-free calls while streaming music or podcasts. In addition, the best functions of your smartphone are now readily accessible on the touchscreen display of many Toyota automobiles thanks to Apple CarPlay and Android Auto.

To make sure that your chosen Toyota model has this functionality, please check with your neighborhood dealer.

How can I pair my phone with the Bluetooth on my Toyota?

How to Install Bluetooth in a Toyota

  • Make sure your mobile device has Bluetooth turned on.
  • Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

Can’t get Bluetooth to work with a Toyota?

Here are the steps for each: The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

How can I pair my automobile with my Bluetooth-enabled phone?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. Your response to the message “Personal data is initialized. OK?” will be Yes.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

What is Toyota Smart Device Link connectivity?

  • Press the Menu button on the LCD, select Apps, and then look for Android Auto after allowing access. Now, you may access a few of your smartphone’s apps from the dashboard’s user interface. You are prepared and all set to leave.

Want your media with you on every trip? Follow the instructions above, and your dashboard should deliver. You may effortlessly listen to your media while on the road without having to fiddle with your phone, whether you’re going to the grocery store or conducting other important errands. A must-listen to PodCast? Have you finished your audiobook? And even that is really the very beginning of this technology. Because Toyota aims to give its customers more than just a driving experience that gets you from point A to point B, from safety to smartphone connectivity.

How can I link my Toyota Yaris to my aux?

  • Securely insert the plug into the USB port or auxiliary jack.
  • Put in or remove the plug perpendicular to the auxiliary wire.
  • Holding the plug’s base allows you to insert or remove it.
  • Make use of the USB port indicated by the

Lever poses a risk because it might impair driving and cause an accident.

How does Toyota MirrorLink work?

How is MirrorLink implemented? Simply connect your smartphone using a USB cable to the USB port in your car, much like with CarPlay and Android Auto, and the infotainment system will instantly transfer data from the device. The home screen has big, easy-to-touch icons and comparable features, making it quite similar to Apple CarPlay.

How do I locate my car’s Bluetooth PIN?

If connection via Bluetooth is necessary, there’s a chance the pairing code is etched on the gadget somewhere, either on a sticker on the bottom or in the battery compartment.

How do I connect my iPhone to my vehicle?

CarPlay, a smarter and safer way to use your iPhone in your car, is a feature that is available in some vehicles. When you use CarPlay, the functions of your iPhone that you want to use while driving are shown right on the dashboard of your vehicle.

To begin with, confirm that your country or area and your car both support CarPlay.

Connect your iPhone to the USB port on your car’s audio if it supports CarPlay utilizing the USB port. A smartphone symbol or a CarPlay icon may be used to identify the USB port.

Press and hold the voice command button on your steering wheel to set up CarPlay if your vehicle supports wireless CarPlay. Alternatively, check sure your car is in Bluetooth or wireless pairing mode. Next, select your vehicle on your iPhone by going to Settings > General > CarPlay > Available Cars. For more details, consult the owner’s manual that came with your vehicle.