The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
In This Article...
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
Why does my car indicate maintenance is needed following an oil change?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the oil light on a 2005 Toyota Tacoma be reset?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down until the odometer shows “000000 is shown before the initial value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.