The low tire pressure icon will appear in the instrument display and a warning message will appear in the Multi-Information Display if the Tire Pressure Monitor System detects critically low pressure in one of your tires.
If the warning light continues to flash, check all the tires and top off, fix, or replace any that have inadequate air pressure.
The warning could be activated by rotating tires, adjusting tire pressure, or changing tire sizes.
After starting the car, hold down the reset button while doing so. On the instrument panel, it is located low and to the right of the steering wheel.
Hold down the button until the instrument panel’s TPMS indicator light blinks slowly three times.
Turn off the engine after letting it run for a few minutes so the system has time to record the pressure of each tire.
When you start the car, if the light turns on and blinks, it can mean that something isn’t functioning correctly. You should take it to Passport Toyota to be checked out.
You must have a Toyota dealership register any wheels or pressure sensors you replace with aftermarket parts.
Disclaimer: When tire pressure is dangerously low, the Toyota Tire Pressure Monitor warns the driver. Tire pressure should be periodically monitored using a gauge; do not rely only on the monitor system for the best tire wear and performance. For details, refer to your owner’s manual.
Not all vehicles and model grades come with every feature. Please refer to your Owner’s Manual for more information, including crucial safety data.
In This Article...
How can the tire pressure of a Toyota Camry be checked?
That you are being cautious with your new car is fantastic! Observe these procedures to check the tire pressure on a 2018 Toyota Camry:
- Start the car’s engine.
- Locate the reset button on the instrument panel’s lower right and press and hold it there while waiting for the TPMS light to flash three times.
- As your vehicle records the tire pressure for each tire, let it run for three to five minutes.
- Restart your automobile after turning it off. It’s possible that your tires or the sensor itself are malfunctioning if the TPMS indicator illuminates and blinks.
It’s still a good idea to check your tires with a gauge even though this will alert you if your tire pressure is dangerously low. This will enable you to check that each tire is at the recommended tire pressure for 2018 Camrys in cold weather, which is 32 psi.
Why not spend a moment on the Jerry app learning about your insurance options while you’re learning more about your new car? Download Jerry and respond to a few short questions to quickly receive competitive bids. The typical user saves $879 yearly!
The 2020 Camry has TPMS, right?
The tire pressure monitoring system warning light will illuminate if your TPMS sensor has stopped working or its battery has run out. Count on the professionals at your local Toyota service center to execute the required repairs on your 2020 Toyota Camry.
TPMS reset button, closed loop
A “SET” or “TPMS RESET button can be found on some Toyota vehicles and is either under the glove box or beneath the steering wheel. The system searches for the already-stored sensor IDs when the button is pressed. The “SET button can be utilized while replacing tires, changing or altering tire pressure, changing tire size, or conducting a tire rotation with differing tire pressures in the front and back.
The ECU must be unlocked in order for the relearn method to function properly if the “SET button is pushed after new sensor IDs are introduced but before a relearn is carried out. A few sophisticated TPMS diagnostic tools can unlock the ECU. You can successfully complete the relearn procedure if your TPMS scan tool offers the “UNLOCK ECU option.”
Toyota TPMS vehicles manufactured in the USA vs Japan
There are two choices for the Year from 2006 to 2011 when choosing the Make, Model, and Year of your car. Toyota Camrys that were sold in the US were initially produced in either the US or Japan. With the VT56, Quickset, or your diagnostic scan tool, it is crucial to choose the appropriate option of “2008 USA” or “2008 JAPAN” since there is a tiny difference in how the TPMS data is delivered to the vehicle’s ECU.
Examine the VIN barcode of the car, paying close attention to the first character, to determine if the Toyota Camry you are working with was made in Japan or the USA.
- “The number 1 denotes that the car was made in the USA.
- “J denotes that the car was made in Japan.
Toyota TPMS vehicles with spare tire
Since 2006, some Toyota Camry models have had the option to be purchased with a spare tire equipped with a TPMS sensor. To fully reset the system and write all of the TPMS IDs to the vehicle’s ECU, you must additionally engage the spare tire’s TPMS sensor during the relearn procedure. The TPMS light will continue show a TPMS MIL even if the spare tire is not in use. You will be given the option to select 4 or 5 tires after choosing the Make, Model, and Year. Check for the following signs to see if your Toyota Camry was manufactured with a spare tire:
- Does your car have a spare tire or donut? If there is a tire in the trunk, it needs to be placard-pressure inflated and equipped with a TPMS sensor.
- If there are no tires in the trunk, the size of the trunk usually indicates whether the vehicle was constructed. It most likely came with a spare tire when it was created if it appears like a full tire can fit in the trunk. If not, all that might be needed is a donut, which doesn’t need a TPMS sensor.
Left Front, Right Front, Right Rear, Left Rear, Spare Tire are in that order.
Indirect TPMS for Toyota Camry 2004-2006
In 2004, Toyota Camry introduced TPMS systems. They initially employed the indirect TPMS technology, which lacks sensors in the tire. Through the ABS system, indirect TPMS systems transmit tire pressure. Toyota transitioned to a direct TPMS system in February 2006, in which TPMS sensors are used to transmit tire pressure information.
High line vs. low line TPMS systems, Toyota Camry 2014-2019
The Toyota Camry features low line and high line TPMS systems from 2014 to 2019. When you reset the TPMS system, it is crucial to know which system you are using. The system won’t work properly and may display 0 PSI on the high-line system’s dash if the wrong sensor is placed, such as a low line TPMS sensor on a high line TPMS system car.
System for Low Line TPMS:
Low tire pressure is indicated by a low line TPMS system by the TPMS light alone. To check the tire pressure, you must use a tire pressure gauge or TPMS equipment. The light will remain on until the tire is fully inflated with the recommended quantity of air when the tire pressure is 25% underinflated. When you start your car, the light will flash for a minute if there is a system failure.
The tire pressure of each tire is shown on the dash or instrument display using a high-line TPMS system. The TPMS sensor will immediately tell the location of the sensor if there is a fault.
On a 2020 Toyota Camry, how do you reset the tire pressure light?
Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.
Does Toyota alert you to a low tire?
Tire Pressure Monitoring Systems are standard on all new Toyota vehicles (TPMS). Essentially, the system’s function is to inform drivers when a tire or tires are in need of being refilled, repaired, or replaced. Any queries customers may have about the TPMS in their Toyota car can be addressed by the service team here at Toyota Palo Alto. Come see how the Tire Pressure Monitoring System in Your Toyota Vehicle operates with our team today!
What Should You Do When the Tire Pressure Monitoring System Warning Light is Active?
In order to measure the tire pressure for each of the car’s four tires, the Tire Pressure Monitoring System in your Toyota vehicle essentially uses sensors. The TPMS Warning Light and a warning message will both illuminate on your Toyota instrument panel when one or more of your tires have too little air in them. Now, drivers should check the pressure in each of their four tires, and if required, fill them. If, after doing so, the warning light and message still appear, you should contact your neighborhood mechanic or a Toyota dealership to have the problem further investigated.
How Do You Reset the Tire Pressure Monitoring System?
Sometimes the alert will also appear after you rotate your tires, change your tire size, or adjust the tire pressure. In these situations, all you have to do is reset the TPMS to account for the modifications you made to your car’s tires. Simply press and hold the while the engine is running to reset the TPMS “Most Toyota models include a reset button on the instrument panel to the right of the steering wheel. Keep the “Press the reset button three times until the TPMS Warning Light blinks slowly. To finish the reset procedure, let the engine run for a few more minutes and then shut it off again.
Visit us at Toyota Palo Alto right away if this procedure doesn’t work if you think your Toyota vehicle’s TPMS is seriously malfunctioning. Visit us as well to learn more about the service deals we have to offer!
How are tire pressures checked?
determining tire pressure
- Remove the cap covering the tire’s air valve, and store it safely away.
- For a few seconds, firmly press the tire gauge against the exposed valve stem.
- Check the air pressure display.
- Compare this value to the tire pressure that is advised.
- Change the air valve cap on the tire.
Why, after filling the tires on my Camry, is the tire pressure light still on?
When your tires are correctly filled, the Toyota tire pressure warning light ought to automatically turn off. Try one of the following approaches to reset it if it remains on: 10 minutes of driving at 50 mph or more. When you start the car again after this, the tire pressure sensor can reset.
Why, Toyota, does my tire pressure light remain on even after filling the tires?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
Which TPMS brand does Toyota employ?
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
The TPMS sensors for the Toyota Sienna’s direct TPMS system are mounted inside the wheel. The TPMS sensors will send information to the vehicle’s ECU if one or more tires show low tire pressure. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
According to the TIA relearn chart, a TPMS relearn is advised to transmit the new TPMS sensor IDs to the vehicle’s ECU whenever a sensor for one or more wheels is changed, the air pressure is adjusted, and the tires have been rotated.
A 2020 Toyota Camry Hybrid’s tire pressure should be checked.
On the instrument panel, it is located low and to the right of the steering wheel. Hold down the button until the instrument panel’s TPMS indicator light blinks slowly three times. Turn off the engine after letting it run for a few minutes so the system has time to record the pressure of each tire.
How do Toyota tire pressure sensors function?
A sensor is located inside each of your tires and is fastened to the valve stem. It is battery-operated and uses radio frequency ID to broadcast your tire pressure (RFID). The RFID from each of your tire pressure sensors is received by a module. Each sensor’s pressure data is compared to a permissible threshold.
My tires are in good condition, so why is my low tire pressure sign on?
While the tires appear to be in good condition and the low tire pressure light is ON, you can:
- simply press a button to reset the machine and observe the results; or
- The sensors need to be changed since one or more of them are damaged.
After starting the vehicle, the low tire pressure warning light ought to turn on for a few seconds. The light ought to be turned off right away.
Drive your car, preferably to the closest gas station or tire shop, to check the air pressure in each tire if the low tire pressure warning light is still on.
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
But if the low tire pressure warning light is still on and all the tires are adequately inflated and warmed up, move on to the next step.
Take this opportunity to get out the owner’s manual. The TPMS reset button may be found on the console or in the glove box, depending on the make and model of your car.
Here are the steps to take after finding the TPMS reset button:
- Don’t start the engine after turning the key to the ON position.
- For at least three seconds, press and hold the TPMS reset button before letting go. The system will switch off the warning light and produce a beep or other audible alert.
- To finish the reset process, start the engine and drive the vehicle for 30 to 1 hour at a minimum speed of 19 mph.
- It’s time to check or replace the TPMs sensors if the warning light comes back on.
- To get the system tested, drive to the nearest tire store or dealership.
If your car has TPMS, avoid making it a practice of resetting it every time the low tire pressure warning light comes on.
Your safety is considered during the system’s design. The pace of technological advancement means that the TPMS sensors get better with each new model. However, you should make it a practice to check the tire pressure each time you get in the car in order to get the most out of what you have.
Use a different method than the TPMS to check the tire pressure. A quick visual check is sufficient to establish the existence of a flat.
Here’s a helpful hint: just in case, always have a tiny tire pressure gauge in the glove box. You may check the real tire pressure with this straightforward gadget before the TPMS activates.
It could be time to take your vehicle to the shop where they will have a specific tool to “re-learn the sensor” if your TPMS light is still on. These tools are available online, but they are not inexpensive. I would advise researching the Autel TS501.