A password must be entered in order to access the administrator menu, which is generally off-limits to general operators, before the Toyota forklift maintenance light may be reset. The maintenance hour meter can be set from this menu.
Certain combinations must be entered in the dashboard display below in order to accomplish these tasks. The four buttons have been assigned the letters A through D for ease of reference throughout these instructions. Before attempting to complete the procedure, it could be beneficial to become familiar with these guidelines.
In This Article...
Entering the administrative password:
1. Hold down buttons B and D at the same time for two seconds. Both at the start of the 2 seconds and at the conclusion of the 2 seconds, a brief beep should be heard.
2. In less than 10 seconds, press button C. There should be one more beep. Within 10 seconds, do this again by pushing button C, and you’ll hear another little beep.
3. Press and hold buttons B and D simultaneously for 2 seconds within the next 10 seconds. When B and D are first pressed, a brief beep is heard like before, but after 2 seconds, several more brief beeps are heard. The administrator’s menu ought to appear.
An illustration of what the administrator menu might look like is displayed above. The buttons A, B, and C move from one list of options to the next, while the button D selects a setting and takes the user to that setting’s specific screen.
Resetting the maintenance hour meter:
1. Use button D to pick the setting “MAINTENANCE HR” after finding it. It should resemble the menu on the right.
2. The operations of buttons A through D are used to set the maintenance hour meter’s time. When Button A is held down for more than two seconds, the selected value is reset to 0. Button B decreases the meter’s set time, Button C raises the meter’s set time, and Button D brings up the administrator menu.
NOTE: From 10 to 200 hours, time can be changed in 10-hour intervals. From 200 hours to 2000 hours, it can be set in 50-hour increments. It can’t be set to less than 10 or more than 2000 hours.
Locking the operator setting menu (DX model only):
1. Find the location “Use button D to select MENU LOCK.
2. Locking this menu restricts the setting values that normal operators can modify. preparing to “Choosing YES will stop the operator’s setup menu from appearing. The administrator menu screen is displayed when Button D is pressed, and Button B picks “YES, Button C selects “NO.
We also recommend reading our post on how to perform simple forklift maintenance.
How can a forklift error code be cleared?
A: The procedure for clearing codes on Caterpillar and Mitsubishi forklifts is extremely exact. Before attempting to clear forklift codes, it helps to be familiar with these procedures. Additionally, it is advised that you use a stopwatch to time yourself precisely since many tasks must be completed in specific amounts of time before moving on to the next. These stages are intended to be visually presented in the diagram. Be patienteven skilled Caterpillar and Mitsubishi forklift mechanics occasionally make mistakes when performing these steps!
1. At the same time that the forklift key switch is turned on, start the stopwatch. Don’t step on the gas pedal.
2. Push the forklift accelerator five times in three seconds.
with the pedal being released to complete the set of five. You have five seconds to do this. You run the risk of never clearing the codes if pressing the accelerator five times in a row takes longer than five seconds.
3. After waiting for seven seconds, hit and hold the accelerator for at least ten seconds until the malfunction indicator light begins to flash.
4. Immediately let go of the gas pedal. This launches a self-diagnostic test, and one or more blinking forklift DTC codes will appear on the dashboard display.
5. Let the pedal rest for at least 10 seconds.
6. For 10 seconds or longer, press and hold the accelerator. By doing this, the forklift codes are successfully cleared and the findings of the self-diagnostic test are deleted. On the dashboard, only the current hour meter will be visible; there shouldn’t be any codes.
What is the Toyota forklift’s SAS light?
The System of Active Stability (SAS) monitors the forklift’s activities continuously and automatically takes preventative action as necessary. All of this was included to the majority of Toyota forklifts in 1999 to safeguard operators in potentially dangerous circumstances.
How can I tell whether a forklift engine is a Toyota?
Models of Toyota forklifts weighing up to 17,500 lbs.
- “G denotes that it is running on LP or gasoline.
- “diesel is the initial letter.
- “B is short for battery-operated.
- On products in Class III, a “The letter W in this place designates a walk-behind forklift.
What does the forklift code E 43 mean?
– A fault in the LPG air-fuel ratio is described by DTC E43 (P1815). This engine requires a lot of cranking power to start. When mass air flow sensors malfunction, the ECM may electrically adjust the cranking time.
What does the forklift code F 16 mean?
F16 indicates that the computer received the identical signal from both directions for more than 2 seconds. Was a backup alarm installed? You could inspect the wiring from the directional switch to the ECM “pin to pin.”
What does the forklift code E 30 mean?
ECCS C/U Error signal, code E30. Either the ECM receives no power or perceives a low voltage source. – The ECM received no, little, or a lot of electricity.
What does the forklift code E 38 mean?
It alludes to the fuel pressure sensor detecting unusually high fuel pressure. DTC E-38 may be set when the fuel pressure in the fuel piping or hose has been abnormally high for a predetermined period of time, according to additional troubleshooting information.
What is the E250 code?
Congenital adrenogenital diseases associated with enzyme deficiency (E250) – ICD 10 Diagnosis Code – Market Size, Prevalence, Incidence, Quality Outcomes, Top Clinics & Doctors.
What does Toyota SAS stand for?
Toyota’s special system of active stability, or SAS, is a cost-cutting partner that is totally focused on increasing operator productivity while safeguarding the operator, the forklift, the products handled, and the facility.
On a Toyota forklift, where is the model number located?
Checking the nameplate is the most straightforward approach to find the serial number for your Toyota forklift (also called a data tag). This handy little plate contains details on your forklift’s weight, model, lifting capacity, andmost importantlyserial number (also called a frame, chassis, or car number). The nameplate on a Toyota forklift appears as shown in the image to the left (ignore the blue circle), and it is typically located someplace close to the forklift’s dashboard, as seen in the image to the right:
Forklifts need serial numbers in order to order the right parts. But what if the nameplate on your forklift is missing or damaged? Then, how do you locate your serial number? Not to worry. The serial number of a Toyota forklift is frequently physically stamped on the forklift’s frame. The table of numerous Toyota forklift models and a list of standards are provided below. When trying to get the serial number for your Toyota forklift, utilize the chart to decide which figure to use. Figure 8 provides an illustration of what your serial number stamp might look like.
How old is a Toyota 5 Series forklift?
Toyota Forklift, a division of Eqstra Industrial Equipment (“EIE”), marked this significant turning point in the company’s history by celebrating 30 years of providing the forklift industry with excellence alongside dignitaries from Toyota Industries Corporation (TICO) and Toyota Tshusho Corporation (TTC).
On October 8, 2014, EIE CEO Gary Neubert hosted a celebration at Toyota Forklift’s state-of-the-art workshop in Germiston, South Africa. Ted Toyoda, Chairman of TICO, as well as other dignitaries from the Eqstra Board, Toyota South Africa, customers, and more than 60 devoted employees who have worked for the company for more than 20 years, attended. At the event, a sake barrel was broken to symbolize the solidification of the alliance between Toyota Forklift, Toyota Industries Corporation, and Toyota Tshusho Corporation, as well as their commitment to continuing to supply the southern African materials handling industry with innovative and high-quality products.
According to Gary Neubert, CEO of EIE, “Partnership is about a win-win trust relationship, not just between our consumers and ourselves, but also between the OEM, the provider of our products, and ourselves.
Toyota Forklift is a story of remarkable growth, attained through technological superiority, astute business strategy, and customer-focused service delivery. From its humble beginnings in 1984 when, as Saficon Industrial Equipment, it was in charge of the local manufacture of the first Toyota forklift, Toyota Forklift is a story of remarkable growth. Toyota Forklift has expanded its product line into warehousing over the past 30 years, concurrent with the release of new, more sophisticated forklift models. In addition, it has increased the scope of its service portfolio by adding rental and used equipment, after-market services, operator training, and other value-added services.
“In my opinion, the launch of the 5 series was the biggest single event,” says Don Bailiff, former CEO and founder of Saficon Industrial Equipment.
The ground-breaking Toyota Series 5 forklift was introduced in 1986, and Saficon Industrial Equipment celebrated cumulative sales of 1,000 units or more in 1988. This accomplishment would eventually be eclipsed when the business sold 500 units in a single year in 1989. The new Toyota Series 6 forklifts were introduced in 1996, and sales were once again spectacular, setting a record in 1996 with 1,650 sales of Toyota forklifts. Toyota Forklift (when still known as Saficon) had expanded to the point by 1997 that it was ranked as the sixth largest distributor of Toyota Industrial Equipment globally. In 2000, the company celebrated 15 years in business by delivering its 10,000th forklift. The Toyota Industries Corporation granted the business international excellence certification in 2003.
The company’s expansion has also been fueled by important distribution agreements and strategic acquisitions. The purchase of Surequip in 1989 served as the impetus for the start of the rental business, and the signing of a distribution partnership with Kalmar of Sweden in 1994 allowed for the expansion of the forklift line to include larger models.
In 2000, Saficon Industrial Equipment entered the warehousing equipment market through a distribution arrangement with BT Industries of Sweden. The same year, the company also acquired Impact Handling Equipment, a UK distributor of forklift, warehouse, and logistics equipment. Toyota Industrial Equipment bought all of BT’s shares in 2001.
Saficon Industrial Equipment, now doing business as Toyota Forklift, celebrated its 20th anniversary as a world-class forklift leader in 2004. A year later, it opened its flagship branch in a specially constructed Toyota Forklift building in Cape Town.
“While we are proud of these accomplishments and our affiliation with the Toyota Group globally, we also welcomed the chance to recognize the essential contributions of our employees to our success at our 30th anniversary celebrations. According to Gary Neubert, many of our employees have spent the majority of their working life with the company, which is an impressive distinction in this industry. As a result, the event also honored employees who have been with the company for 30 years or more.
Toyota Forklift is able to satisfy all customer warehousing and materials handling requirements by providing rental and used equipment, after-market service, operator training, as well as a variety of other value-added services. Toyota Forklift is the sole distributor for Toyota Forklifts, BT, and Raymond Equipment in Southern Africa. Distribution and service are provided by branches in the major cities, and the Southern Africa network is completed by depots and dealers.
In South Africa, numerous other African nations, the UK, and Ireland, Eqstra Industrial Equipment (“EIE”) offers distribution, leasing, renting, and value-added services for industrial, materials handling, and agricultural equipment. The division has the greatest product support infrastructure in the area and is the largest provider of forklifts to the South African market. In keeping with this strategy, the division has expanded the range of forklift equipment it offers by adding value-added services and goods. Examples include the provision of compressed air, industrial cleaning equipment for clients’ properties, and forklift batteries and chargers. Eqstra Holdings Limited is the parent company of EIE.