Step 1: Determine which bulb your Prius needs and get it. Knowing which particular bulb your Prius has is crucial.
The high and low beams will differ, and different model years will use different bulbs.
The brighter high intensity discharge (H.I.D) bulb and the conventional halogen bulb will both be available for headlight bulbs in later model years, which will even give numerous alternatives within the single model year.
To find out what kind of bulb your Prius has, do some online research or consult its owner’s manual.
Clear the space behind the driver-side headlight bulb in step two. Remove any anything preventing access to the headlight’s back.
This will give extra room for moving the headlight bulb during installation and removal. To access the headlight on some Prius models, you may need to remove the plastic air vent and the lid covering the fuse panel.
Most of the vehicle’s plastic parts, including the trim and ducting, are held in place by plastic retainer clips that may easily be removed with a little flathead screwdriver by gently prying them apart.
Remove the headlight bulb in step three. As soon as you can, gently unplug the bulb’s electrical connector from its electrical connector behind the driver’s side headlight.
If your Prius has halogen bulbs, you can easily remove them by unlocking the metal retention clips by pressing on them to release the bulb, or depending on the type of bulb, by simply twisting the bulb away from its socket.
If your Prius has H.I.D. bulbs, a plastic dust cover may need to be taken off in order to access the connector and the bulb.
Install the new headlight bulb in Step 4. Make sure the bulb is correctly positioned in the socket and is securely fastened.
- Reminder: Avoid touching the bulb with your bare fingers since doing so could reduce its lifespan.
In This Article...
How much does a Prius headlight replacement cost?
Estimated cost to replace the headlight bulb in a Toyota Prius. Replacement headlight bulbs for a Toyota Prius typically cost between $109 and $134. Between $33 and $41 is the expected cost of labor, while between $76 and $93 is the estimated cost of parts.
The AutoZone headlights will alter.
To be clear, buying a headlight or tail light for a vehicle at AutoZone is pretty simple if you have the part number for it or simply know the make, model, year, and occasionally even the trim of the car. When you visit a dealership or repair facility, labor is frequently added to the cost of the headlamp.
If your headlamp is easily accessible to the installer and is in most cases, Autozone will replace it.
Step 4. Unscrew the old headlight
Zullo warns that every car is unique. “He claims that while you can reach the bulb with some autos, you can’t with others. Sometimes you have to remove the inner fender to reach behind it because the battery or air filter housing is in the way.
However, changing the halogen bulb is all that is required if you can get the headlight open. This entails carefully unlocking the bulb after examining how it is secured. Zullo cautions that if the clips that are being used here are broken, the entire headlight would need to be replaced. “According to him, you must first examine how it is connected, softly disassemble it, and then carefully reassemble it without touching the bulb’s glass.
Step 5. Screw in the new headlight bulb
Without touching the bulb’s glass, carefully screw in the new bulb. If you do, the oil and grime on your hands could cause the bulb to burst once it heats up. Your car’s hood should be closed. Your headlights ought to work perfectly again after installing the new bulb, allowing you to enjoy driving your automobile day or night.
Most of the time, changing a headlight is simple and doesn’t need sending your car to the shop. See what other do-it-yourself auto maintenance tasks are available.
How are HID headlights removed?
At the back of the headlamp, uncable the connector from the HID bulb after removing the cover covering it. Take the lightbulb out of the reflector. The retaining ring that holds the bulb in place will typically need to be turned in order to release the bulb.