How To Change Timing Belt On 1995 Toyota Camry

Toyota / By

Changing the water pump using the Haynes handbook. first experience handling a timing belt. Phase I went smoothly. All components must be removed in order to reach the timing cover, including the front wheel, skirt, and distributor, which must also be removed in order to view the rotor position. The negative battery cable must also be detached. Plugs weren’t removed. The top #2 timing cover was taken off. Rotated the crankshaft bolt to confirm TDC (the crankshaft pulley notch should be pointing at zero and the camshaft spocket should be aligned with the mark on the camshaft bearing cap). On the belt camshaft spocket, I made match marks. I removed the tension spring and loosened the idler pulley.

Here comes the issue. struggling to remove the crankshaft bolt. inserted a screwdriver and a prybar into the crankshaft pulley.

Prybar was used against an oil pan. I next used a strap wrench. When I did this, the camshaft pulley, the belt, and the crankshaft pulley all turned.

remained in place. The match is not on. To try for TDC, I tightened the tension pulley’s back and turned the crankshaft. Both the match markings and the camshaft pulley are off.

Need guidance/technique for aligning the camshaft and crankshaft and returning to TDC.

How much does a 1995 Toyota Camry timing belt replacement cost?

Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).

Do Toyota Camry models from 1995 have timing belts?

All Toyota Camry V6 models used a timing chain and interference engine from 2007 to 2021. Between 1990 and 2006, non-interference engines and timing belts were standard on V6 Camrys.

All 4 cylinder Toyota Camry models used timing chain and interference engines from 2002 to 2021. Timing belts and non-interference engines were standard on the four-cylinder Camrys from 1990 to 2001.

In contrast to the 2006 Toyota Camry 3.0L V6 190 hp (1MZ-FE) option, the 2021 Toyota Camry 2.5L 4 Cyl. 206 hp (A25A-FKS) option includes a timing chain.

Can I change the timing belt on my own?

It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.

Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.

What You’ll Need to Replace the Water Pump and Timing Belt

  • Wrench socket set
  • tools for driving screws, such as Philips and slot drive
  • Set of Allen keys
  • jar or bucket (for collecting coolant)
  • bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
  • leather gloves
  • Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
  • a fresh timing belt
  • a fresh water pump
  • new antifreeze/coolant

Step 1: Preparation

Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:

  • To reach the undercarriage beneath the engine, jack up the front of the automobile.
  • Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
  • Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
  • Before starting, make sure the engine is entirely cool.
  • To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.

Step 2: Removing the Belts

You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:

  • The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
  • To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
  • Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.

What Toyota engines are causing interference?

Toyota

  • 4.7 liters of obstruction.
  • 3.4 liters without interruption.
  • V6 non-interference, 3.3 litter.
  • V6 non-interference 3.0 litter.
  • Non-interference 2.0 liter.
  • 1.8 liter DOHC gasoline interruption.
  • interfering 1.6 liter SOHC engine.
  • Non-interference 1.6 liter DOHC (4A-GZE and 4A-GE).

Toyota stopped using timing belts when?

So, that is how the timing chain and belt operate. Which one, though, does your Toyota use? Here is a quick list of the components used in the engines of various Toyota vehicles:

Sedan And Hatchback Models

  • All Avalon models from 1995 to 2004 feature timing belts. Timing chains are used in the vehicles from 2005 through 2020, including the 4-cylinder Avalon Hybrid.
  • Toyota Camry: The timing belt is used in all models from 1990 to 2001 as well as the V6 model from 2004 to 2006. The timing chain is utilized by the 20022020 4-cylinder and 20072020 V6 vehicles.
  • Toyota’s well-known Corolla compact vehicle has a timing belt from 1990 to 1997. Timing chains, however, were introduced in models starting in 1998. The Corolla Hybrid and Corolla iM/Scion iM models are included in this.
  • Cressida: The straight-six engine of the Toyota Cressida from 1990 to 1992 had timing belts.
  • This subcompact’s timing chain-powered 4-cylinder engine was sold from 2000 to 2005.
  • Timing chain for all models, 20032013, shown as a matrix.
  • Timing belt for all Paseo models from 1992 to 1997.
  • Prius: From 2001 to the most recent models, all Prius models share the same timing chain. The Prius C, Prius V, Prius Prime, and Prius Plug-in are all included in this.
  • All Tercel models produced between 1990 and 1998 had engines with timing chains.
  • Timing chains are used in all Yaris vehicles produced from 2007 through 2020, including the Scion iA and Hatchback variants.

Crossover Models

  • Toyota’s C-HR is a brand-new compact crossover with a strong emphasis on lifestyle.
  • Timing chains are used in all 4-cylinder engines in the Highlander from 2001 to 2007; timing belts are used in V6 vehicles. From 2008 through 2019, timing chains are used in all V6 vehicles. Except for the V6 hybrid, it employs timing belts from 2006 to 2010 and timing chains starting with the 2011 model year.
  • RAV4: From 1996 to 2000, all 4-cylinder models of the RAV4 used timing belts; starting in 2001, timing chains were used. Timing chains are also used in the V6 version from 2006 to 2012. Timing chains are used in the hybrid cars from 2016 to 2020.
  • Venza: The timing chain for the Venza ranges from 2009 to 2015.

Minivan Or MPV Models

  • Timing chains were employed in the engines of this storied Toyota minivan from 1991 to 1997.
  • The Sienna sports a V6 engine with timing belts and was manufactured from 1998 to 2006. The V6 vehicles from 2007 through 2020 then employ timing chains. Timing chains are used in the 4-cylinder variant from 20112012.

SUV And Trucks

  • 4Runner: Timing chains are used in the four-cylinder 199020002010 4Runner. Timing belts are used on the 19902002 vehicles for the V6 variations. Timing chains are then used for the 4Runner’s V6 engines from 2003 to 2010. If your engine is a V8 model (20032009), a timing belt is used.
  • FJ-Cruiser: This mid-size SUV with classic styling was sold from 2007 to 2014. They were all powered by V6 engines with timing chains.
  • The Land Cruiser offers a wide range of engine configurations. The gear drive system is used with the 19901992 straight-six engine (the same function, but uses a set of gears rather than belts or chains). Timing chains are used in the 19931997 straight-six engine. The V8 models from 1998 to 2007 make use of timing belts. While the V8 versions from 20082011 and from 20132020 employ timing chains.
  • 20012009 4.7L V8 Sequoia Timing belts are used in Sequoia. Timing chains are used in both the 20102012 4.6L V8 and the 20082020 5.7L V8 models.
  • Toyota T100: Timing belt for the 19931998 V6 engines and timing chains for the 19951998 4-cylinder engines
  • Toyota Tacoma: The Toyota Tacoma and the 4Runner share the same base, but the engines are different. Timing chains are used on all 4-cylinder vehicles from 1995 to 2020. Timing belts were used on V6 vehicles up until 2004, however starting with the 2005 model, they were replaced by timing belts.
  • Toyota Truck: Timing belt for 19901995 V6 engines and timing chains for 19901995 4-cylinder engines.

How much does repairing a timing chain cost?

Being proactive is a good thing because an engine that has a broken timing chain could suffer significant damage.

Timing chain replacement might cost between $600 and $800 to do it yourself or $1,600 to $1,800 to have a technician do it. Due to how difficult it is to replace this element, the price is exorbitant.

The parts for a DIY timing chain replacement will run you about $650. But this is a job that’s best left to mechanics with a lot of experience.

Fortunately, timing chains are built to endure the lifespan of the vehicle, unlike rubber timing belts, thus it is rare that you will need to have it changed. Watch out for these signs if you think your timing chain may be broken:

  • Noisy timing chain
  • Starting the car is challenging.
  • While idling, the engine shakes or vibrates
  • Engine has poor performance or is misfiring
  • The check engine light is on.

Bring your car to a repair as soon as you can if any of these symptoms persist. Quickly addressing the problem will stop further harm to your car.

Save money on other auto expenses, such as car insurance with Jerry, to make place in your budget for unforeseen auto repairs. In just a few seconds, the Jerry app can quickly scan rates from more than 50 of the best insurance providers, including Travelers, Nationwide, and Progressive! Once you’ve decided, they even assist you in canceling your old coverage.

With Jerry’s assistance, you may uncover $887 in annual savings on auto insurance and save time!

Are specific tools required to change a timing belt?

You must check the timing reference marks before replacing a timing belt, chain, or gear set on some engines. If you don’t know which timing marks to use or how to align them, some engines’ many timing marks may be confusing.

When changing a timing belt or chain, numerous engines demand specialized tools. To ensure that the timing belt is correctly tensioned, you should at the very least have a belt tension gauge.

When changing a timing belt or chain, many engines also demand specialized tools. To ensure that the tension on a timing belt is appropriate, you should at the very least have a belt tension gauge. On some dual overhead cam engines, specialized camshaft positioning tools (or a bolt or pins) may also be needed to hold the cams in place while the belt or chain is being changed.

A handful of the unique OEM timing tools that can be needed include the following:

How long does it take to change a timing belt?

Timing belt replacement is a pricey service. Depending on the vehicle, it is a complex, time-consuming process that can take 48 hours. However, repairing the timing belt before it breaks will avoid engine damage and ultimately cost you less money.

What occurs if a timing belt malfunctions while you’re driving?

Some engine parts can malfunction without causing significant harm. Without any issues, you can drive to your mechanic and get the part replaced. But with a timing belt, this is not the case. The camshaft will stop turning when the timing belt snaps, but the crankshaft will continue to rotate at 1000 revolutions per minute. Because of this, the pistons will keep rising and falling in their cylinders and, occasionally, may hit the valves. The pistons, valves, and cylinder heads will sustain damage when this occurs, and because to how quickly it occurs, the damage will be almost immediate.

It is crucial to pay close attention to your engine and make sure it is operating smoothly. Take your car to a repair right away if you begin to notice any of the aforementioned symptoms. It can be nothing, only require a quick correction, or indicate more serious issues that could develop into the dreaded timing belt failure while driving. Come to Professional Auto Repair’s shop and let us examine your timing belt and other parts to ensure that your car is working properly.

How is the timing belt checked?

To check the belt, start by examining its exterior to determine if any teeny cracks are developing. The timing belt is an extremely durable rubber-covered metal-reinforced belt. The rubber ought to be largely smooth, without any cracks or missing sections.