7. In front of the fuse box, you should see the halogen low beam bulb #9006 in operation (drivers side). Mine is plugged into a brown electrical outlet. The parking light, which is immediately to the left, should be removed and put out of the way. Mine has a light gray assembly. By doing this, the wire is removed from the way. When you reach inside to remove the low beam halogen bulb #906, there will be one less thing to distract you.
8. Disconnect the halogen low beam bulb #9006’s electrical cord. Press down on the electrical connector from the top while simultaneously pushing down on the locking tab on the bottom. Not much work is required to pull it off.
9. Turn the halogen low beam bulb #9006 counterclockwise while seeing it from the back. Mine resisted being twisted free right away. Move gently and deliberately. It ought to eventually unfasten. Despite being close to a fuse box, the #9006 bulb was readily removed.
10. Insert the brand-new #9006 halogen low beam bulb. I selected a $10 Sylvania #9006 from Wal-Mart.
11. Reattach the electrical cord to the replacement halogen low beam bulb, model number 9006.
12. Clean the battery tray, the battery’s terminals, and the cables’ connectors.
Install the battery and battery tray.
14. Attach the 10mm positive battery cable to the battery.
15. Attach the hold-down and rod using one 10 mm bolt at the front and one 10 mm nut at the back.
16. Connect the negative battery terminal, but make sure your remote locking and unlocking device is ready to use before you do. The horn will start to blast as soon as the negative battery line is connected to the battery’s negative terminal (alarm). Press the UNLOCK button on your car’s remote control quickly. Retighten the negative cable all the way. The low beam should also be functional once again since it will turn on when the alarm is activated.
17. Replace the substantial plastic shield and all lockdown tabs.
18. Start the car and adjust the radio, clock, etc.
19. The power windows can be resynchronized. The following was taken from a different post on this site. It came from member inov8.
NOTE:
Please reset the driver’s door whenever the battery terminal has been detached.
Do the following while the ignition switch is in the “ON position:
1. To fully open the driver’s door power window, push down and hold the switch.
2. Pull and hold the power window switch on the driver’s door until the window closes.
Hold the switch in place for about a second until the switch changes.
3. Verify that the “onetouch open and close function” is functioning properly by fully
4. To fully open the passenger door’s power window, depress and hold the switch.
5. Pull and hold the power window switch on the passenger door until the window closes.
6. Verify that the “onetouch open and close function” is functioning properly by fully
20. Power seat resynchronization can be done. taken from the manufacturer repair manual:
In This Article...
Step 4. Unscrew the old headlight
Zullo warns that every car is unique. “He claims that while you can reach the bulb with some autos, you can’t with others. Sometimes you have to remove the inner fender to reach behind it because the battery or air filter housing is in the way.
However, changing the halogen bulb is all that is required if you can get the headlight open. This entails carefully unlocking the bulb after examining how it is secured. Zullo cautions that if the clips that are being used here are broken, the entire headlight would need to be replaced. “According to him, you must first examine how it is connected, softly disassemble it, and then carefully reassemble it without touching the bulb’s glass.
Step 5. Screw in the new headlight bulb
Without touching the bulb’s glass, carefully screw in the new bulb. If you do, the oil and grime on your hands could cause the bulb to burst once it heats up. Your car’s hood should be closed. Your headlights ought to work perfectly again after installing the new bulb, allowing you to enjoy driving your automobile day or night.
Most of the time, changing a headlight is simple and doesn’t need sending your car to the shop. See what other do-it-yourself auto maintenance tasks are available.
Do LED headlights outperform halogen ones?
driving a vehicle? If you’ve ever taken a short or long trip by car, you’ve probably noticed that different vehicles have different bulbs. Halogen and LED headlight bulbs are two of the most popular types used in cars today. Which of these is different? Is one kind superior than the other?
Halogen Bulbs Pros and Cons
Halogen headlights are the most typical headlights seen nowadays and may be found in both new and old cars. An incandescent light that uses halogen gas is known as a halogen bulb. Vehicles that use halogen bulbs have headlights that are yellow in color.
What benefits and drawbacks come with halogen bulbs? Halogen bulbs are less expensive to replace than LED bulbs if you’re on a tight budget. Additionally, the yellow light is softer and less likely to readily blind other motorists. What are the disadvantages of halogen lamps then? It all comes down to how much energy is used. A halogen bulb gets hot to the touch when it is operating. These bulbs waste energy since they use more to produce the same amount of heat that they produce.
LED Bulb Pros and Cons
In many ways, LED bulbs are the antithesis of halogen bulbs. White light from LEDs is brighter than typical halogen lights. This looks much cooler and makes it easier to see around corners. LEDs are also much more efficient than halogen lamps. While halogens produce a lot of heat, LEDs produce far less heat, which contributes to energy savings. An LED bulb should live longer than a halogen bulb because it uses less energy. These benefits have led to an increase in the popularity of LED bulbs among motorists. LEDs are now available as standard or optional equipment with the majority of contemporary automobiles.
On the other hand, LEDs cost more to fix. Additionally, replacing an LED is far more difficult than replacing a halogen bulb, necessitating the assistance of a professional for more drivers. Additionally, LEDs can be harsher on other drivers’ eyes when driving at night because of how bright they are.
What is the brightest permitted headlight bulb?
The brightest bulbs you can get for your automobile that are also street legal are probably xenon headlights, which are frequently mistaken for high-beam lights.
However, this group of extremely bright and energy-efficient lights can be utilized as taillights, parking lights, reverse lights, or turn signals. For optimal heat dissipation, these bulbs are completely enclosed in aluminum.
One buyer was ecstatic to try these LED lights because of their brightness “mowing until dusk. They added, in addition, “How intelligent they were caught me off guard. They use around half as much energy as OEM bulbs, which is better for the charging system. It will now slightly speed up the starter battery’s recharge.