Your key fobs’ replacement batteries are simple to locate. These batteries are available at any auto parts store or internet supplier, and changing them simply takes a few minutes. Here is a simple guide showing you step-by-step how to change the battery in your Toyota Highlander key fob.
In the first step, take the emergency key out of the key fob. To let the key out, press the button on the key fob’s side.
Step 2: Carefully twist a small flat-blade screwdriver to pry apart the key fob case by inserting the tip into the notch where the key once rested.
3. The battery compartment is located at the circuit board’s back. With the aid of the screwdriver, carefully flip it over and remove the old battery. A suitable replacement for this one won’t be easy to find if the little components on the circuit board are damaged.
Don’t simply toss the old battery in the garbage. You ought to be able to properly dispose of it. There are battery retailers who will also accept your old batteries for recycling or proper disposal.
Step 4: Before putting a new battery into the battery compartment, check sure it is aligned according to the proper battery orientation. Before installing the new battery, you might want to make sure the battery compartment is clean, clear of dust and debris, and that there is no danger of an electrical short.
A CR2032 3-volt lithium battery, which is what the Toyota Highlander remote key fob uses, is readily available from any auto parts store or internet vendor.
Step 5 is to put the circuit board back where it belongs. Line up the key fob’s top cover and back cover, then snap them together. Before proceeding to the following step, make sure it is properly closed and secured.
Step 6: Reposition the mechanical key into the slot, and your key fob should function as intended.
The key fob should function after changing the batteries because there is no need to reconfigure it.
In This Article...
What kind of battery powers a key fob for a Toyota Highlander?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
What kind of battery does a key fob for a 2015 Toyota Highlander take?
How to change the battery in the Toyota Highlander “Tombstone key fob” (2014, 2015, 2016, 2017, 2018, 2019) For a step-by-step demonstration on how to replace the battery in your key fob, see the video below. What you’ll require is: a single CR2032 battery.
How long does a key fob’s battery last?
WMBF – MYRTLE BEACH, SC A key fob is used by millions of drivers to lock and unlock their vehicles.
Keyless entry is a fantastic feature, but you can only benefit from it if you keep the technology up to date.
The little things in life can often mean the most, such as not having to search through your purse for your keys or using your key fob to raise and unlock the back doors so you can load groceries.
But what occurs if the fob breaks down? The key fobs for your car require maintenance just like the vehicle itself does.
When anything breaks down, Gary Freeman, owner of C & G Auto in Myrtle Beach, advised against replacing it right away.
“A replacement fob can be pricey; they can cost several hundred dollars, and once you have a replacement fob, they need to be programmed,” said Freeman.
He advises checking the battery as your first action. If you have to push the remote lock or unlock multiple times before it finally locks or unlocks, that could be a sign that the battery is starting to lose power, according to Freeman.
According to his calculations, the keyless entry remote can be safely stored or hung up anywhere beyond the six to ten feet from which the automobile computer system can read the fob.
According to Freeman, the battery life for the majority of automotive key fobs is three to four years with regular use. Additionally, he claims that the battery life of your fob may be impacted by where you keep it. Freeman advises against hanging the fob near the car or leaving it in the car overnight.
It (the key fob) sends signals continuously, which drains the battery in the key fob and causes an excessive drain on the battery of the car since a computer recognizes that signal as indicating that I’m ready to start, according to Freeman.
According to Freeman, if the key fob malfunctions, the automobile frequently won’t start because the computer system won’t acknowledge that the key fob is present in the vehicle.
The owners’ manual will typically answer any questions you have about it, and almost any auto repair shop can replace that battery, said Freeman.
Do you need to reconfigure your key fob after changing the battery?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Can you do it yourself to program a Toyota key fob?
Although buying a remote control straight from Toyota will save you time from having to reprogram it yourself, learning how to program a Toyota key fob yourself will allow you to save money. Fortunately, it’s a short and simple process. Avoid being locked out of Evergreen Park without a functional key!
DIY Key Fob Programming
You might be able to program a replacement yourself, depending on the make and type of your vehicle.
The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The problem is that in order to complete the process quickly or at all, you might require two functional key fobs.
Therefore, it is wise to acquire and set up an extra remote before you require it. Additionally, it’s a wise move because most used-vehicle buyers, particularly auto dealers, would pay extra for a car that has at least two functional sets of keys or key fobs. Therefore, having a spare key will not only be useful when you need it, but it will also benefit you in the long run.
After-Market Key Fobs
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
Locksmith
If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
Can the battery in a Toyota key fob be changed?
This information can also be found in your owner’s manual; typically, Toyota key fobs need a CR 2032 3V. Most electronic retailers carry new batteries, or you may order one online. Place the key inside the fob after putting the fob back together.