This
help owners of the Toyota Camry sedan XV40 sixth generation (2007, 2008, 2009, 2010 & 2011).
In This Article...
How can I replace the battery in the key fob for my Toyota Camry?
How to Replace the Battery in a Toyota Smart Key
- To remove the key cover, use a flathead screwdriver or a key.
- Battery Cover should be removed.
- Get rid of the dead battery.
- Place the Plus+ Side Up while installing the new battery.
- Put a new battery cover on.
- Switch out the key cover.
- Examine the key fob.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
What sort of battery is needed for a Toyota Camry key fob?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
Can you do it yourself to program a Toyota key fob?
Although buying a remote control straight from Toyota will save you time from having to reprogram it yourself, learning how to program a Toyota key fob yourself will allow you to save money. Fortunately, it’s a short and simple process. Avoid being locked out of Evergreen Park without a functional key!
What kind of battery should I use in my 2012 Toyota Camry key fob?
For Toyota Camry vehicles made from 2007 to 2018, this Toyota Key Fob Battery Replacement is the genuine alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2016 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make that the previous battery in your car’s remote key or key fob has a 2016 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- 10 years of storage guarantee.
- superior lithium
- three levels of corrosion defense
- IEC: D2032
- 3.0 Volt
- Size: 2 x 20 x 20 (mm).
- 220 mAh
Numerous Toyota vehicle models can use the Energizer Key Fob CR2032 battery. the list of Toyota vehicles that this key fob battery fits is as follows:
Fits the following vehicles:
models of the Camry from 2007 to 2018
NoteThis is the proper battery if you have any other Toyota model vehicle with 2016 on the back of the remote.
The 2032 battery is typically used in Toyota vehicles from 2012 and up with smart key fobs.
The number is stamped on the battery of your key fob, so if you’re not sure for sure, just open it with a small screwdriver.
For the Keyless Entry Remote/Keyfob on your Toyota, these batteries are the ideal OEM replacement. The Battery that never stops working. Avoid being shut out by choosing inferior, less expensive brands!
What should I do if the battery in my Toyota key is low?
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.