How to Leap a Prius: The Steps
- Step 1: To locate the jump start terminal, open the hood of your automobile and check under the fuse box cover.
- Step 2: Join your car’s positive terminal to the red positive jumper cord.
- Step 3: Join the second red positive cable to the helping vehicle’s positive battery terminal.
In This Article...
If the 12-volt battery is discharged in your Toyota RAV4 Hybrid
If the vehicle’s 12-volt battery is depleted, the hybrid system can be started using the following steps. You can also contact a qualified battery roadside assistance provider that can safely jump start your Toyota RAV4 or your local Toyota dealer.
Restarting the Toyota RAV4 Hybrid System
You can jump start your car by doing the following if you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery:
- Toyota RAV4 hybrid automobiles with alarms: Verify that the electronic key is there because, depending on the circumstance, when connecting the jumper (or booster) cables, the alarm may go off and the doors may lock.
- Uncover the fuse box and the hood. Lift up the lid after fully releasing the lock with claws A & B.
- Open the cover of the specialized jump-starting terminal.
- A positive jumper cable clamp should be connected to your car at (A), and the clamp at the other end should be connected to (B) on the other vehicle. A negative cable clamp should then be connected to (C) on the second vehicle, and the clamp at the opposite end of the negative cable should be connected to (D). (A) A terminal for exclusive jump starts (your vehicle). (B) Battery Positive (+) Terminal (second vehicle). Positive (+) battery terminal (C) (second vehicle). (D) As depicted in the illustration, a solid, stationary, unpainted metallic point placed far from the special jump starting terminal and any moving parts.
- Fire up the second car’s engine. To recharge your vehicle’s 12-volt battery, turn up the engine speed a little and keep it there for around five minutes.
- When the power switch is off, you can open and close any of your car’s doors.
- Maintain the second vehicle’s engine speed while turning the power switch to ON to turn on your car’s hybrid system.
- Ensure that the “READY” indicator is lit up. Get in touch with your local Toyota dealer if the indication light does not turn on.
- After the hybrid system has turned on, unplug the jumper cables in the exact opposite direction of how you connected them.
- Reinstall the fuse box cover in its original place after closing the cover over the exclusive jump starting terminal.
- As soon as the hybrid system starts, schedule a quick inspection at your local Toyota dealer.
When recharging or replacing the 12-volt battery in your Toyota RAV4 Hybrid
When the 12-volt battery is depleted, it is occasionally possible that your Toyota RAV4 Hybrid’s smart key system won’t work to unlock the doors. To lock or unlock the doors, use the mechanical key or the wireless remote control.
After the 12-volt battery has recharged, the hybrid system might not start on the first try, but it will start normally on the second try. There is no malfunction here.
The vehicle stores the power switch mode in memory. The system will go back to the state it was in before the 12-volt battery was depleted once it is reconnected to it. Be sure to turn off the power switch before removing the 12-volt battery. When reconnecting the 12-volt battery, take extra care if you’re not sure what mode the power switch was in just before the 12-volt battery depleted.
When removing the 12-volt battery terminals on your Toyota RAV4 Hybrid
- Always start by removing the negative (-) terminal. When the positive (+) terminal is removed, a spark may happen if the positive (+) terminal comes into touch with any nearby metal. This spark could cause a fire in addition to electrical shocks, death, or serious damage.
How is a Toyota hybrid jumpstarted?
Jumping a Toyota Hybrid Battery: A How-To Guide
- Fuse Box Under the Hood, Open.
- Activate the Red Terminal Cover.
- Connect the Toyota Terminal to the Red Jumper Cable.
- Red/Black Jumper Cables should be connected to the second vehicle.
- Your Toyota hybrid should have the black jumper cable connected to an unpainted metal surface.
Can a hybrid car be boosted?
When your hybrid car’s battery dies, you might be thinking, “Can you jump-start a hybrid car? Yes is the clear-cut response. This is one of the instances where hybrid cars and regular gas-powered cars have similarities. It’s crucial to understand how to jump-start a hybrid because the procedure isn’t exactly the same as it is for other vehicles. It might be quite harmful for you and your car if something goes wrong.
Make sure you know what you’re doing if you need to jump-start your hybrid in a pinch to get it going again. First, switch off both vehicles as well as everything else that uses power, including your air conditioner, radio, and any GPS equipment you may have. Any of those that are left on while getting a jump start run the danger of being damaged by the electrical surge.
Open the hoods of both vehicles as you would for any normal jump-start after making sure everything is off. Next, connect the positive terminal on your hybrid with one end of your jumper cables, and the terminal with the same color on the other car. From that point on, things change a little. One end of the additional cable will be attached to the negative terminal in the operational vehicle. Consult your owner’s manual to find the proper location as it will depend on the model of your hybrid.
You need to start the functioning car and let it run for a while after the cables are securely linked. You can start your hybrid after a little delay, and everything should function normally. Make sure you unplug the cords in the reverse direction from how you connected them.
How can I charge my hybrid battery manually?
A hybrid battery can be charged in a few different ways, but the most typical method is with a 12 volt charger. This kind of charger charges the hybrid battery using a 12 volt battery. The procedure is fairly easy:
1. Join the hybrid battery’s positive terminal to the positive terminal of the 12 volt charger.
2. Join the negative terminal of the 12 volt charger to the battery’s negative terminal.
3. Turn on the charger and give it a few hours to fully charge the hybrid battery.
4. After the hybrid battery has been fully charged, unplug the charger and put it away in a secure location.
It’s possible that the 12v charger is malfunctioning if your hybrid battery won’t charge. To see if it works, try charging the hybrid battery with a different charger. The hybrid battery might need to be changed if you’re still having trouble getting it to charge.